User's Manual
Edge Reader Installation Steps
Important: Edge Reader and Edge Relay can NOT be installed at a distance greater than 30 ft (10 m)
from each other
● Make two holes on the wall as per the image above corresponding to the type of reader
o Edge Reader enclosure on the unsecured side (outside of the door frame)
o Edge Relay enclosure on the secured side (inside of the door frame)
● Insert the nylon screw plugs into the wall
● Connect the wires as per Wiring Harness Information
o Cables with the grey sheath [5 Core Grey] are to be connected color to color
● Edge Reader and Edge Relay enclosure wall plates are to be secured onto the wall using the
mounting screws (A)
● Install the Edge Reader and Edge Relay enclosure onto respective wall plates
● Secure the Edge Reader and Edge Relay enclosure to the wall plates using security screws (B)
| 14 User Manual and Installation Guide: Proxy Mobile Reader Edge
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/edge-install