User's Manual

Wiring Diagrams and Steps
Connect to Door Hardware
Step 1:
Connect the 5 wires from the Edge Reader Enclosure (outside)
unit to the 5 wires from the Edge Relay Enclosure (inside) unit
based on corresponding colors
Step 2:
Crimp the positive (red) wire from the power source to the red
wire of the Edge Relay Enclosure (inside) unit and to one of the
wires from the strike
Step 3:
Crimp the ground (black) wire from the power source to the
black wire of the Edge Relay Enclosure (inside) unit and to the
white wire of the Edge Relay Enclosure (inside)
Step 4:
Crimp the green wire from the Edge Relay Enclosure (inside) unit
to the remaining strike wire
| 15 User Manual and Installation Guide: Proxy Mobile Reader Edge
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/edge-install