Safety Manual

DOC 50.601
Care
All optical surfaces (laser aperture, sensor lens) must be kept clean.
Use the supplied lens cleaning cloth. Avoid vigorous polishing
to preserve the anti-reflective coatings of the glass elements.
ROTALIGN touch computer housing may be wiped clean using
a soft cloth dampened with a mild, non-abrasive detergent (use
soapy water with only 1% mild soap in water). The display should
be cleaned using a soft lint-free dry cloth.
Maintenance
Although the ROTALIGN touch system is essentially maintenance-
free, the following points should be observed:
 The calibration accuracy of both sensALIGN sensor and
laser should be checked every two years as indicated by the
coloured date wheel label located at the bottom of their
respective housings.
 Please return the sensALIGN heads to your authorized
PRÜFTECHNIK service center for inspection by the date
indicated.
When returning lithium-ion battery operated ROTALIGN touch
system components to PRÜFTECHNIK for inspection, service or
repair, ensure that the batteries are not defective. If you suspect a
defect in the battery, DO NOT ship the unit with the defect battery
back to PRÜFTECHNIK. You may contact your local representative
for further information.
The relevant safety data sheets for all PRÜFTECHNIK batteries are
posted on the PRÜFTECHNIK website at www.pruftechnik.com.
The packaging and dispatch regulations for any given battery are
described under section 14 in the safety data sheets.
Disposal
Any waste electrical and electronics parts of the ROTALIGN touch
system including memory sticks must be disposed of according to
applicable safety and environmental regulations.
Customers in member states of the European Union must adhere
to the EU directive 2002/96/EC on waste electrical and electronic
equipment (WEEE). PRÜFTECHNIK products that fall under this
directive are marked with the shown crossed-out wheelie bin
symbol and must be disposed of according to this directive.
 The marked components must be disposed of with
PRÜFTECHNIK or their authorized disposal partners.
 Such parts must be taken to the nearest collection facility.
 If you have any questions regarding the WEEE Directive,
please contact your local PRÜFTECHNIK sales representative.
Transporting magnetic brackets and other magnetic
components
To ensure that stray magnetic fields do not affect the avionics in
aircraft, the aviation industry has put forward stringent regulations
for air transportation of magnetic material. The magnetic field
strength of such components must not exceed specified limits.
To comply with this regulation, a cover plate for all PRÜFTECHNIK
magnetic components and brackets is available. The plate lowers
the magnetic field strength significantly, keeping it well below
the required limits and therefore causing no restrictions for air
transportation. The relevant safety data sheets are available for
download and reference on the PRÜFTECHNIK website at www.
pruftechnik.com.
CAUTION