User's Manual

VIBCONNECT RF 11.2011

Safety

machinery.

Note

Risk of damage to equipment while housing is open!

Touching the electronic components on the mother board can lead

to electrostatic discharge, which can damage system components.

» If contact with such components cannot be excluded, wear an

earthing wristband.

Note

EMC

High-frequency radiation and electrostatic discharge (ESC) near

the sensors can lead to incorrect measurements.

» Do not install sensor cables in high-voltage cable ducts.

Note

Avoid potential loops when extending the antenna

If you need to extend the antenna from the housing to achieve

better reception, the antenna cable might cause a potential in the

sensor unit / bridge.

» Install the antenna cable so that potential differences are avoided.