User's Manual

VIBCONNECT RF 11.2011

System description

(characteristic value, FFT spectrum, envelopes) are performed on

the bridge.

The bridge is equipped with a built-in memory, containing the

actual measuring conﬁgurations and the measurements that have

not yet been transferred to the OMNITREND software. Measure-

ments that have been written to OMNITREND are automatically

deleted from the bridge memory.

Note

The measurement import must be started manually in the

OMNITREND software. Ensure that the data is regularly written to

OMNITREND. Otherwise, the memory capacity of the bridge might

be exceeded so the oldest measurements are automatically over-

written with the latest ones.

For optimum reception, install the bridge in an exposed location,

preferably within sight contact of all connected sensor units. The

transmission range in the open ﬁeld is maximum 300 m (optimum

conditions). For larger machine parks, you might need to install

several bridges operating separate wireless networks.

The bridge is powered by mains power.

Large industrial sites can

be serviced by installing

several bridges, whereby

the number of bridges is

not limited.