User's Manual

53
VIBCONNECT RF 11.2011
1B-8F-DC-4C-00-36
1B-8F-DC-4C-00-38
Channel 1
Channel 3
Channel 2
Channel 4
• In OMNITREND, open the Machinery Manager.
• Select one of the previously set up online measuring points
(see also “Setting up measuring point database”, page 28).
• Call up the ‘Meas. Data’ tab.
• In the ‘Meas. Point Type’ section, first select the bridge with the
best reception in the ‘Online Device’ field.
• In the second field, select the sensor unit that is installed at the
respective measuring point (refer to the measuring point report).
• In the ‘Channel no.’ field, enter the channel number as noted
in the measuring point report for this sensor unit (see also
“Connecting sensor unit”, page 41).
• Repeat the above steps for all other measuring points.
Installation and commissioning
Assignment of sensor
unit, channel and
measuring points in the
measuring point report
= “RF Sensor Unit 0”
Assignment of bridge,
sensor unit and channel
in the OMNITREND
database
Bridge
Sensor unit
Channel