Owners Manual

4865 Sterling Drive, Boulder, CO 80301 . PH: 1 (800) PSAUDIO . www.psaudio.com

Owner’s Reference Sprout100

Sprout100 has four rear panel inputs you can connect your

sources to: two digital, one analog and one phono for your

vinyl. It can also connect wirelessly via Bluetooth.

Sprout100 can connect to three digital devices, two

from the rear panel connections and one wirelessly via

Bluetooth from your phone, computer or tablet.

USB connects Sprout100 to your computer. Once

connected, Sprout100 will become the audio output

of your computer, playing from programs like TIDAL or

iTunes. Using a standard USB 2.0 certied cable, connect

Sprout100 to your computer’s USB port. Then be sure to

select the digital input on the front panel.

If you are running a Mac computer or a Windows 10 PC

the driver for Sprout100 is built in. If you are instead

on a Windows 8.1 or earlier computer, you will need to

download and install the USB driver.

To download the USB driver go to PS Audio’s website:

www.psaudio.com. Go to Support->Downloads and

download the USB driver.

It will be necessary to unzip the le and install it on your

computer. This will connect your Windows computer

to Sprout100. You must then select “PS Audio USB 2.0

Audio Out” (on a Mac) as your output device or, “PS Audio

Sprout100” on Windows.

Connect the

inputs rst

Digital

Sources

USB input

Operating Guide