Owners Manual

4865 Sterling Drive, Boulder, CO 80301 . PH: 1 (800) PSAUDIO . www.psaudio.com

Owner’s Reference Sprout100

The connector labeled “In” located under “Analog” on the

rear panel is a stereo line input. Use this input to connect

the output of a mobile device, television, tape deck or any

source with an analog output.

The connector labeled “Out” located under “Analog” on the

rear panel is a buered stereo-line output. This is a variable

line level, full audio stereo output. Whatever you are

listening to on Sprout100 will be available on this output.

Many system pairs benet from the addition of a

subwoofer which serves to augment the low bass, giving

a much richer, full range musical sound. Most subwoofers

have RCA input connections. Sprout100’s subwoofer

output is the single ended, summed Right / Left channel

signal and is ideal for Subwoofer with an RCA input and

built in low pass lter.

If a cable is inserted into the subwoofer output, Sprout100

will automatically switch to bass boost disabled mode (blue

LED). This is because we recommend using the volume

control on your subwoofer to set your bass level.

Analog

Output

Analog

Input

Subwoofer

Output

Operating Guide