Owners Manual

Stellar Phono Preamplifier

Operation Guide

Front Panel

LEDs

Mute - When the Mute LED is illuminated red, the Stellar Phono Preamplifier is muted.

You can activate/deactivate mute by using the remote control or holding in the front panel

PS Audio logo LED button for 3 seconds.

*Input - The Input LED indicates which input you have selected. Using the remote, you

can toggle between moving magnet (MM) and moving coil (MC) cartridge inputs.

*Gain - The Gain LED indicates the selected level of amplification. Using the remote, you

can select the correct gain setting, which is dependent on the cartridge’s output voltage.

MM: 44dB (Low), 50dB (Medium), 56dB (High)

MC: 60dB (Low), 66dB (Medium), 72dB (High)

*Loading - The Loading LED indicates the selected resistive loading. Using the remote,

you can select the correct resistive loading, which is mandatory for flat frequency

response.

MM: Resistive loading - 47KΩ fixed loading

MC: Resistive loading - 60Ω, 100Ω, 200Ω, 47KΩ, and custom loadings

The custom loading option allows you to use the potentiometers on the rear panel to

select between 1 - 1000 ohms.

* These features can only be changed via the remote control.