Owners Manual

Stellar Strata Amplier

Operation Guide

Using the

Remote

All of the most-used functions can be operated from the included IR remote control.

Idle Mode

Use the “O” button to put the unit in Idle mode. Use the “On” button to return it to the

operating mode.

Volume and Balance

ere are two sets of volume buttons on the remote, and you may use whichever are more

comfortable or convenient for you. One set is the bar with “-“ and “+” symbols on it. e other

set of volume controls is the up and down arrows.

Input Select

ere are 9 input buttons that allow you to directly select any of the Stellar Strata Amplier’s

sources.

Filter and Phase

e Strata has a digital lter that can tailor the sound of digital sources to the listener’s

preference. Changing the lter and phase settings is oen desirable during a listening session,

and buttons are provided to adjust those settings directly from the remote control. Please see the

corresponding sections under “Menu Features” for more details on what these features do.

NOTE: e lter settings only apply to digital inputs.

Display Dim

Pressing the “Dim” button will turn o the display and all the indicators on your Stellar Strata

Amplier. Any time you press any button on your remote control, the Strata will wake up and

reactivate the display and indicators for 7 seconds. Aer 7 seconds with no button activity, the

display will go dark again. Pressing the “On” button will restore the Strata display to normal

operation.

NOTE: e “Dim” button operates many PS Audio products, so that one button press will

darken your entire equipment stack for a less distracting listening experience.

HT (Home eater)

e HT, or Fixed Volume button, activates the xed volume input, Analog Input #3 as described

in the Setup section of the manual. If you have not congured your Stellar to use this feature the

HT button will not do anything.