Operating instructions
Page 17   
October 2010 
202-890-0403 
MP3 Player Operation 
Turn MP3 on and off- Press Shift Key  (Mon 1) and MP3-ON/OFF (NAV1). 
Audio annunciation will be "MP3 power on" or "MP3 power off." The audio 
panel will always turn on with the MP3 player turned off. 
To toggle sequential and  random play mode, Press Shift Key 
(Mon 1) and press Nav 2. The audio annunciation will be “MP3 
random,” or MP3 sequential” 
To skip to the next song, press Shift Key (Mon 1) and MKR. 
To pause MP3 play, press Shift Key (Mon 1) and TEL. 
File Transfer 
The PMA8000B MP3 has 1 GB of internal storage. The program inside 
the unit will recognize and upload any compatible audio files (.wav, 
.mp3, unprotected .wma) from an external source, through the USB ca-
ble. The PMA8000B MP3 is not 
compatible with iTunes formats. 
 Laptop transfer 
Due to the transfer rate advantages, we recommend that you transfer 
files from a laptop to the PMA8000B MP3 if possible. Direct USB de-
vice transfer requires 35-40 minutes to transfer 1GB of songs; Laptops 
typically require 4-9 minutes for the same amount of data with USB 2 
port. 
PS Engineering recommends Microsoft XP operating system or later. 
1.  Using the supplied 2.5 mm-to-USB cable, along with the supplied 
USB-to-USB adapter cord (PS Part number 425-003-1454), connect 
this set of cables from the PMA8000B MP3 front panel jack to a 
PC USB port. 
2.  With the audio panel turned off, push and hold the ”Transfer” (Mon 
2) while powering the PMA8000B MP3 on. Hold the button until 










