Installation manual

17
AUXILIARY INPUTS
ADF audio, if wired, will be heard on MON 1.
DME audio, if wired, will be heard on MON 2.
MON 1 and MON 2 will both be heard at the same time if both
buttons are selected. Note that MON 1 and MON 2 are
connected either to the standby audio output from the radio OR
the ADF/DME so you will not hear both the COM standby and
ADF or DME.
HF audio, if wired, will be heard via the wired Telephone button.
MUSIC DISTRIBUTION
Music 1 can be the rear connector (J2, pins 23, 24, 25), the front
panel jack, OR a Bluetooth® music stream. The three inputs are
paralleled, so if more than one device is connected, all will be
combined into the audio (not recommended).
Music 2 is only sourced from the rear connector (J2, pins 26, 27,
28). Music 2 is presented only to the passengers, and cannot be
presented to the crew positions.
Music 1 is presented to the pilot and co-pilot unless “Music One
All Headsets” music distribution is selected.