Operating instructions

202-890-0602 Page 17
July 2008 PMA8000MP3 Pilot Guide
File Transfer
To upload from a USB memory device, connect the device to the
2.5mm to USB cable, and then plug the cable into the front of the
PMA8000 MP3. Press Shift Key (TEL) and “Transfer” (AUX) for more
than 1 second. You’ll hear “USB Transfer initiated” and every 30 sec-
onds “USB Transfer in Progress” “USB Transfer Complete” will indi-
cate successful transfer, and a “USB Error” if there is a problem.
Files are loaded from the USB in the order that they are stored. It will
take about 30 minutes to transfer 1Gigabyte of data. We recommend
that you only store 1G of files on the USB drive, to ensure that all the
desired songs are loaded into the PMA8000B MP3.
After the music transfer is complete, the PMA8000B MP3 will auto-
matically reset to store the files and create the new play list. Therefore
it is not advisable to upload files in flight or when the audio panel is
otherwise in use.
Note:
The PMA8000B MP3 unit ONLY supports MP3 files (.mp3),
Windows Media Files (unprotected .wma) and Wave (.wav) files.
It does not support iTunes file formats.
Different types of files, and different music file programs may
result in variation in the volume level of the stored music.