Operating instructions

Page 6 202-890-0602 PMA8000MP3 Pilot Guide

be heard over the speaker. To exit PA mode, push Mute and SPR

again.

Intercom Operation

IntelliVox® VOX-Squelch

No adjustment of the IntelliVox® squelch control is necessary. There

is no field adjustment. Through three individual signal processors, the

ambient noise appearing in all six microphones is constantly being

sampled. Non-voice signals are blocked. When someone speaks, only

their microphone circuit opens, placing their voice on the intercom.

The system is designed to block continuous tones, therefore people

humming or whistling in monotone may be blocked after a few mo-

ments.

For consistent performance, any headset microphone must be placed

Headset

Manufacturer

Model Part Number

Bose Dynamic

Electret

M87

90010

90015

90020

David Clark H10-30

H10-20, H10-40

H10-13.4, 13X

H20-10X

90010

90015

Lightspeed All 90015

Peltor 7003

ANR Pro, 7000

90010

90015

Pilot 11-20, 11-90, 1776, DXL 90015

Sennheiser All 90015

Telex Airman 750, AIR4000

AIR3000, Echelon 100

90010

90015

Note: For optimum microphone performance, we recommend use of a

Microphone Muff Kit from Oregon Aero (1-800-888-6910). This will not

only optimize VOX performance, but will improve the overall clarity of

all your communications.