User's Manual

AUTONOMOUS COUNTER (NON-POWERED TYPE) USER MANUAL [PSM-NGC-NP01]
2
② Hardware specifications
 16bit MCU
 256Kbit FRAM
 2.4GHz BLE5
③ Rating
Usable temperature
-25 ~ 80 ℃
Quality guarantee
2 years (based on manufacturing date)
Communication
cycle (RF)
24 times / day
Battery life
About 5 years (based on 20 ℃, may vary depending on
usage conditions)
Cycle time range
0.2 ~ 300 sec
Size (mm)
55 x 46 x 26
※ Please note that the service life of the battery may be shortened due to frequent operation or replacement.
④ Magnetic sensor recognition (SHOT)
15mm
60mm
SHOT IN
SHOT OUT
baseline
baseline
※ Carefully install the product and the magnet bracket as they will break when installed beyond the baseline.
⑤ LCD display
The LCD display changes each time the button is pressed, and returns to the cumulative shot display mode
within 30 seconds after the button is pressed.
No.
Display or setting
Display
example
Initial value
Remark
1
Cumulative shots display
0123456
0
-
2
Preset setting
Preset
-
-
3
ID display
1601001
1601XXX
Manufacturing number: 0-999
4
Setting mode
2 Setup
-
-
※ When using for the first time, please press the button once. (If not pressed, the LCD will not be displayed.)
※ Use the button only when setting.
⑥ QR code (13 digits)
Digits
1
2
2
2
3
3
Code
Type
Domestic /
International
Year of
production
Week of
production
Model /
comm. cycle
Serial Number
Display
N
CM / CG
20
01
A01
001
⑦ Communication status – Received signal strength indication (RSSI)
 Display for 3 seconds during manual communication
(Manual communication: Press the button for 3 seconds in the cumulative shot display mode)
 Display status
When communication is successful, the LCD displays as follows.
Sensor recognition
Size (mm)
SHOT IN
< 15
SHOT OUT
> 60