psaproducts.com.au 1300 772 776 enquiry@psaproducts.com.au COLOUR VIDEO DOORPHONE KIT instruction manual Choose Choose for intercoms fire • security • intercoms for intercoms PAN780KID fire • security • intercoms psaproducts.com.
1. FEATURES CONTENTS PAGE 1. Features 2 2. Kit Components 2 3. Outdoor Camera Specifications 2 4. Indoor Monitor Specifications 3 4. Indoor Monitor Installation 4 5. Outdoor Camera Installation 4 6. Installation & Maintenance Notes 5 7. ID Card Programming 6 8. Wiring & Maintenance Instructions 9. Operating Instruction 9 10. Warranty Statement 10 1. 21mm slim indoor monitor with touch buttons. 2. Weather resistant outdoor camera 3.
4. INDOOR MONITOR SPECIFICATIONS 5. INDOOR MONITOR INSTALLATION Microphone Power Indicator Light Chroma Adjuster Brightness Adjuster Talking Volume Adjuster Talk Door Release Monitor Gate Release speaker Ring Volume Adjuster Ring Selection Adjuster 1. Adapter input voltage: AC220V-240V/50Hz 2. Adapter output voltage, output current: DC15V 1200mA 3. Talking last time: 120S±10% 4. Monitoring last time: 40S±10% 5. Working distance: 30M (5 x 0.5mm2) 6. Power consumption: standby <0.
6. OUTDOOR CAMERA INSTALLATION Picture 1. Picture 2. 1.0 Nameplate 1.1 To label the name plate, remove the 4 screws on the back of the door camera & carefully remove the cover. (picture 1) wall bracket 1.2 Unclip the plastic nameplate cover, label the nameplate & clip back the plastic cover (picture 2) 1.3 Refit the rear cover & screws. 2.0 Camera 2.1 Install the mounting base of door camera at approximate height of 150-160cm from the ground. 2.2 Never install door cameras directly facing sunlight 2.
7. WIRING & MAINTENANCE INSTRUCTIONS Cable Specifications: • 0 to 30m: minimum CAT 5 or 5 Core Stranded 0.50mm2 • 30 to 80m: minimum 5 core Stranded 0.75mm2 1. To avoid any interference, all intercom cables should maintain 50mm separation from 240VAC wires 2. Never install door camera directly facing sunlight. This will create a white image on indoor monitor and may damage the camera lens over time. 3. Do not install the monitor or power supply in areas of high temperature or high humidity. 4.
8. ID CARD PROGRAMMING This kit includes four pre-programmed cards. 1 x Adding Card 1 x Deleting Card and 2 x User Cards Follow the below steps to add, delete or re-program add/delete cards Adding User Cards: Step 1: use the adding card to touch the ID card touching zone of the outdoor station. Step 2: use the user card to touch the same area. Step 3: use the adding card to touch the same area. Then the new user card is successfully added. At most 1000 user cards can be added.
9. OPERATING INSTRUCTION 10. Warranty Statement 1. Rings/chimes will be heard & images of visitors will be seen on the monitor once the 1 PSA Products Pty Ltd (ABN: 99 076 468 703) of 17 Millicent Street, Burwood 3125 Victoria, Australia warrants this product for a period of two years from the date of purchase, as reflected on the Authorised CALL button of door camera is pressed. Reseller’s or Distributor’s invoice / receipt provided to you. PSA Products Pty Ltd will repair or replace the 2.