Installation and Operation Manual Model Q916 This manual is suitable for the following components: Part Number PANQ916KS PANQ916KG PANQ916K/SP PANQ916K/GP PANQ916M PANQ916S PANQ916DG PANQ916DS PANQ916MUS Description Kit (Silver door, silver master room, power supply) Kit (Grey door, silver master room, power supply) Stainless steel door plate Kit (Door, silver master room, power supply) Gold door plate Kit (Door, silver master room, power supply) Silver master room station Silver room station Grey door s
Introduction The Panacom Q916 Audio Intercom System offers the latest in audio intercom technology featuring crystal clear communication, security, flexibility, reliability and convenience. It has the following features: Easy to operate. All the functions of the Panacom Q916 can be controlled from any room station using only three buttons. Paging feature allows communication to all room stations. Hands free reply. Volume can be individually adjusted on each station. Mute feature for privacy mode.
Installation Before installing the system, refer to “ID settings” on page 7.
Use 6 core cable (14/020) or CAT5 cable between all stations. Figure 8 cable is required between the Door Station and electric door latch. 12V DC auxiliary output provided on the master station when door bell is pressed. Figure 8 cable is required from Master station to auxiliary device. Wire each station according to the wiring diagram; follow the colour codes on each terminal carefully.
Music module The Q916 System allows background music to be played from the master and room stations. This is possible by using the music module (PANQ916MUS). The music module allow any external music device such as MP3 player, iPod or radio to be plugged into the 2.1mm jack. Features. Music function is an optional accessory. After wiring the music module to the master room (refer to installation), all room stations (including the master station) will have the music playing.
If you purchase a flush mount plate door kit (PANQ916K/SP or GP), the door stations can only be flush mounted. A wall box is available if required (PANWBOX). Cut out size: 90mm W x 160mm H x 50mm D. Surface Mounting Instruction Fix the surface mount base to the wall. Install Station onto the base with screw provided. Replace the front cover onto the station. Refer to diagram below. Recess Mounting Instruction A single wall mounting clip (not included) is required for flush mounting.
ID Setting Behind each station is a rotary ID dial. Each station must be addressed to a specific and unique ID setting. Room Stations. Each Room Station is required to be configured to its unique station ID address. Each room station must have a different ID to each other. Gently turn the dial with a fine blade screw driver with the arrow pointing to the ID number as tabled below. Maximum number of internal room stations allowed is sixteen. Door Stations.
Operating Instructions Operating the Door Station. Press the CALL button on the door station will ring a chime to all room stations. The door station can be answered by pressing and holding the TALK button on any room station to talk and releasing the talk button to listen. Pressing the CANCEL button will end conversation. If cancel is not pressed, the system will auto-cancel after 30 seconds. If a door latch is installed, pressing the unlock momentarily will open or unlock the door.
Operating the room station. Paging. General paging throughout all stations, except the Door Station, can be performed by pressing and holding the TALK button while talking and releasing to hear a reply. To answer the intercom page, the responder presses the TALK button once to respond to the page and can then reply hands-free. The caller must hold the TALK to talk and release to listen. Pressing the CANCEL button will end the conversation.
General Care & Cleaning Important Precautions DO NOT press the Door Release button continuously for long period of time as this could cause an overload. DO NOT drop, shake, or subject units to shock. DO NOT clean the units with benzene, thinners or any solvents. Cleaning To clean simply wipe with a soft cloth, dampened slightly in a mild soap solution. DO NOT spray with an alcohol polish as it may enter the units and cause damage. DO NOT use abrasive cleaners as they may damage the finish.
PSA Products also supply these products; Video Intercoms Audio Intercoms Wireless Intercoms Security Alarm Systems CCTV cameras and DVR Systems Access Control Systems Apartment Intercom Systems Access Control Smoke Alarms and Accessories Fire Panels and Detectors Fire Extinguisher and Blankets 11
Another Quality Product by: PSA Products Pty Ltd 17 Millicent Street, Burwood Victoria 3125 Australia Tel: 1300 772 776 (PSAPRODUCTS) Fax: (03) 9888 9993 e-mail: enquiry@psaproducts.com.au web-site: www.psaproducts.com.
