Owner's Manual

Place the two AAA batteries supplied into the remote control. Be careful to ensure that it is correctly inserted according to the

polarity (+/-). You should only use the battery speciﬁed for this system. Caution: When replacing the batteries, ensure that you only use

standard AAA batteries which are not re chargeable. The use of an incorrect type of battery may cause severe damage to the remote or

risk explosion.

1. ON/Off: Speakers from standby mode to operating mode. The LED on the front will indicate the color of the source last chosen.

2. Volume Control +/-: Increase or decrease audio level. Release mute function.

3. Input Selection: Toggle and select source. The LED on the front of the left speaker will change color, based on the active source:

Analog: Cyan

Phono: Green

USB: Purple

Optical: White

Bluetooth: Blue

4. Mute: Temporarily mute audio output or restore audio output from mute.

5. Listening Mode Selection: Press the “MODE” button on the remote control once to activate the display and cycle through the four

listening modes.

Mode Effect Color

Stereo Normal No Color

Widesound Expanded Soundstage Green

Dialogue Enhanced Dialogue Clarity Amber

WideSound™ Plus Expanded Soundstage with Enhanced Dialogue Clarity Blue

6. Subwoofer On/Off: Subwoofer output can be activated using the supplied remote control, which will also redirect part of the low

frequency content to the subwoofer.

SUB MODE

TREBLE BASS

Remote Control

Power On/Off

Volume Control

Input Selection

Subwoofer ON/OFF

Treble Control

Bluetooth Interrupt

Input Selection

Mute

Sound Mode Selection

Bass Control