Owner's Manual

PHASE SWITCH OR CONTROL
Selects the subwoofer output phase between in-phase (0˚) and
out-of-phase (180˚). See “VII Setup Calibration”
HIGH/SPEAKER LEVEL INPUT TERMINALS (if applicable)
For connecting the PSB subwoofer to receivers or integrated
ampliers equipped with speaker outputs only. See “ VI Connecting
The Subwoofer to Your Audio System.”
HIGH/SPEAKER LEVEL OUTPUT TERMINALS (if applicable)
For connecting the PSB subwoofer to speakers. See “ VI
Connecting The Subwoofer to Your Audio System.”
LOW/LINE LEVEL INPUT JACKS
For connecting the PSB subwoofer to a separate component
preamplier, or to an integrated amplier or receiver with
preamplier-out/main-in connections, at line level. See “ VI
Connecting The Subwoofer to Your Audio System.”
LOW/LINE LEVEL OUTPUT JACKS (if applicable)
For connecting the PSB subwoofer to a separate component
preamplier, or to an integrated amplier or receiver with
preamplier-out/main-in connections, at line level. See “ VI
Connecting The Subwoofer to Your Audio System.”
LFE JACKS (if applicable)
For connecting the PSB subwoofer to a separate component
preamplier, or to an integrated amplier or receiver with LFE/
Subwoofer output connections. See “ VI Connecting The
Subwoofer to Your Audio System.”
USB POWER OUTPUT
This 5V USB power output allows for the use of the RT100
wireless subwoofer speaker link.
7
HIGH LEVEL OUTPUT TO SPEAKERS
Right
Left
HIGH LEVEL INPUT FROM RECEIVER
Right
Left
Left
Right
LOW LEVEL
INPUT FROM
PREAMP
LOW LEVEL
OUTPUT
TO AMP
Right
Left
LFE OUTPUT
LFE INPUT