ENGLISH WIRELESS ACTIVE NOISE CANCELLING HD HEADPHONES OWNER’S MANUAL
Thank you for purchasing a pair of PSB Speakers M4U 8 Headphones. Producing natural musical dynamics and precisely imaged sound, these high fidelity headphones bring you closer to the music you love. Engineered with over 45 years of audio excellence and research, the M4U Headphones deliver unmatched sound quality, all-day comfort and fold-and-go portability, for music enthusiasts and professionals.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device. Radio Frequency Exposure Statement for IC The device has been evaluated to meet general RF exposure requirements. The device can be used in mobile exposure conditions. The min separation distance is 25mm.
ENGLISH Bottom Right 3.5mm jack for optional audio equipment Call Microphones for the phone Micro USB plug, used to charge the internal battery.
Wired Connections Before connecting your headphones, ensure your audio source is powered off, as severe damage to equipment and/or your ears could result. To connect your headphones, plug the 1/8-inch (3.5mm) straight connector into one of the inputs located at the base of the left (L) or right (R) ear cup. This allows you to pick a preferred side for a more comfortable listening setup as shown in Figure 2. Figure 2 1/4” Adapter If your audio equipment uses a 1/4-inch (6.
The main controls are located on the rear part of the right ear cup. They are used to control Volume, Noise Cancelling, and your smart device (tablet, iPod) as needed. The Controls are used as follows: Volume and Active Monitor Slide up towards the + sign to increase the volume. Slide down towards the – sign to lower the volume. Press the button VOL to engage the Transparency Mode and reduce your current audio track by 30dB.
Pairing is the process required to create a link between Bluetooth devices to allow wireless connection. You must pair a device with the PSB M4U 8 headphones to be able to make a BLUETOOTH connection for the first time. Before you start pairing operation, make sure that: The Bluetooth device is placed within 1 m (3 feet) of the headset. The M4U 8 is charged sufficiently. To pair your device: 1. Turn on the Bluetooth feature on your source device. 2. Open the Bluetooth settings on the source device. 3.
With the volume set to low, turn on your audio source, find a comfortable listening level, and drift into a personal space filled with the sounds of your favourite audio/video collections. Headphone Placement Each ear cup is marked with “L” and “R” to indicate the left and right sides of the headphones. Be sure to put them on correctly to enjoy your audio as originally intended and maximize your personal music experience.
For safe, sanitary use, it is essential to maintain and clean your M4U Headphones periodically. However, excessive cleaning may cause damage and jeopardize the longevity of the product. When not in use, always store headphones in the supplied protective case, and store in a clean and dry environment. Avoid storing in extreme heat or cold temperatures and humidity, and avoid exposure to liquids.
The 3-Position Power Switch will be “AMBER” to indicate to the listener that there is approximately 3 hours of battery life remaining. Although battery life will vary upon usage, the average life is 55 hours (which may vary further if using rechargeable batteries). Upon needing replacement, simply grasp the headband and tilt the top of the left ear cup towards the right side to locate the two pull-tabs on the bottom as indicated in Figure 4.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables auxappareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage, et(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre lefonctionnement.