Specifications

Removing Programs
Product Reference Guide 3-7
Removing Programs
Only user-installed programs can be
removed.
1. To remove a program, select
Start
> Settings > Control Panel > Remove
Programs
.
2. Select the program you wish to
remove from the list and tap
Remove.
Firmware Update Utility
The Falcon is equipped with a field upgradeable firmware mechanism. Firm-
ware updates for the Falcon are uploaded to PSC‘s website
(www.psc.com).
After you have downloaded the desired update, there are several ways you can
update the firmware on the Falcon.
• Use the Falcon Management Utility (FMU) if you have multiple Fal-
cons to update. Refer to the FMU User’s Guide on the Product CD
included with your Falcon for more information.
• If FMU is not available or you have only a few Falcons to update, use
the Firmware Update Utility (FUU), described below, to install or
update the firmware using an ActiveSync connection. Refer to
"Installing & Setting Up Microsoft ActiveSync" on page 4-1 for more
information.
FUU can also be used to restore the firmware onto a Falcon that has become
corrupted, such as would happen if the Falcon were powered down during an
ActiveSync firmware update. See "Restoring Falcon Firmware" on page 3-14.
The following sections provide procedures for the retrieval and installation of
the most current firmware image onto a Falcon.