Specifications

AutoStart
Product Reference Guide 3-15
4. Select the current *.img file and click Open.
5. Verify that the Falcon is turned on. Insert the Falcon into a powered
dock connected to the host computer.
6. Click
Update Terminal on FUU on the host PC.
7.
FUU will restore the firmware on the Falcon as shown on page 3-12.
8. After the firmware has been restored, the Falcon will automatically
reset.
AutoStart
The AutoStart program provides two functions:
• Automatically reinstalls specified CAB files when the Falcon starts up.
• Allows you to create a list of applications (with optional command line
arguments) to run automatically at startup.
Please be patient and do not remove the Falcon from the Dock during this proce-
dure. The firmware image of the Falcon can take as long as:
• 12 minutes to download using a USB connection.
• 22 minutes to download using a serial connection with 115K baud rate.
• 130 minutes to download using a serial connection with 19.2K baud rate.
CAUTION
Performing a Windows Mobile Clean Boot will remove the AutoStart folder and all
AutoStart settings. Reference the Falcon 4400 with Windows Mobile QRG for detailed
information about a Clean Boot.