Specifications

Networks, Communications, and Connections

4-10

Falcon

4400 Series with Windows

3. Select the desired Property from

the menu list.

4. Input the appropriate

Value.

5. Tap

OK.

6. Select

OK on the menu bar to

close the control panel.

For additional assistance in using

ACU to

configure your RF network, tap the ques-

tion mark to access online help or contact

Cisco directly at http://www.cisco.com/.

Windows Zero Config should be used to administer the radio for cards not

specifically listed (for example, DRCB or Broadcom based radio). Refer to the

manufacturer of your radio card for further information.

SNMP

SNMP (Simple Network Management Protocol) is the standard protocol for

managing devices on a network. The Falcon Management Utility (FMU)

makes use of SNMP to send and receive configuration information to the PSC

terminals. Since the networked terminals are constantly running SNMP, this

allows FMU to interface with the terminal at any time, without requiring user

intervention on the terminal.

With SNMP running on the terminal, other SNMP based network manage-

ment tools such as HP Openview

and CastleRock SNMPpc

may also be

used to interface with the terminals. To support this capability, PSC has

released the Management Information Base (MIB) for the PSC Windows-

based terminals. The MIB is used by the management tools to allow them to

better support the configuration values provided on the terminals, such as

scanner controls and terminal type information.

The MIB is available at www.psc.com.

For more information on SNMP, refer to

SNMP Interface, or go to: