Specifications

DM-24
DIGITAL MIXERS
403
PHOTO - VIDEO - PRO AUDIO
ORDER & INFO. [phone] • FAX: [phone] [phone]
1-800-875-6951 • www.bhphotovideo.com
TASCAM
MU-24/DM
The optional MU-24/DM Meter Bridge
provides channel and master metering
facilities through LED bargraph displays
which are switchable in “layers”.
IF-AN/DM
Eight channels of analog I/O on D-25 con-
nectors. Installing two of these cards will give
you a total of 32 simultaneous analog inputs.
IF-TD/DM
Eight channel TDIF card. The IF-TD/DM is
not available for input.It is designed to be
used to send the 6 buss outputs to a TDIF
stem recorder like a DTRS machine.
IF-AD/DM
Eight channels of ADAT optical I/O with
ADAT Sync.Adding two of these cards will
allow you to mix 24 tracks of ADAT. The
IF-AD/DM does NOT support 96kHz.
IF-AN/DM
Eight channels of AES/EBU I/O on D-25
connectors.Adding two IF-AE/DM
AES/EBU cards provides a total of 20 chan-
nels of AES/EBU I/O (four channels come
standard on the DM-24.) The IFAE/ DM
AES/EBU card supports 4 channels of DUAL
LINE or HI SPEED I/O
IF-CS/DM
For cascading two DM-24 digital mixers. To
cascade two DM-24s, you must put one cas-
cade card in “SLOT 1”of each DM-24. A
cascade cable is included.
Synchronization and
Machine Control
◆ The DM-24 can be easily configured as a
remote controller for a wide variety of
devices using the DTRS remote, P2 and
MMC protocols. Multiple devices can even
be controlled simultaneously.
◆ MIDI In,Out and Thru/MTC Out allows
you to Send MMC,Lock to incoming
MTC, Update firmware via Standard MIDI
File, offload and upload library and
automation data as well as Send/Receive
MIDI program changes and MIDI
controller data.
◆ Built-in Mackie HUI emulation provides
MIDI-based control surface support for a
variety of DAW applications including
ProTools, Logic, DP, Cubase and Nuendo.
◆ Two DM-24s can be cascaded together to
act as one large console.This requires the
IF-CS/DM cascade option card in each
mixer.
◆ Cascading allows the two mixers to share
busses 1-8, aux sends 1-6, the solo buss
and the stereo buss.Connections to the
control room and stereo outputs would be
made on the cascade master.
◆ An AES/EBU option card added to the
cascade master can be used for sending the
5.1 mix digitally to your stem recorder
while an analog option card could be
added to the cascade slave to send the 5.1
mix to the surround monitoring system.
Cascading two DM-24s provides:
• 64 channels with 32 mic pres
• 48 channels of TDIF I/O
• 16 channels of ADAT lightpipe I/O
• 4 AES/EBU 2 channel digital I/O
• 4 S/PDIF 2 channel digital I/O
• 8 Assignable sends and returns
• 4 Internal effects processors
(2 in each)
• 33 Touch sensitive,motorized faders
• The ability to run a 24 track, 24-bit,
96kHz, 5.1 mixing environment.
Cascading Two DM-24s