Specifications

SHURE
FP-33
AUDIO MIXERS
360
For Any Inquiries Regarding Your Order, Call Our Customer Service:
[phone] • [phone] • FAX: [phone] • [phone]
PHOTO - VIDEO - PRO AUDIO
Portable 3-Channel Stereo Mixer
The standard by which portable mixers are measured, the
FP-33 is used all over the world for remote audio recording,
ENG/EFP applications and location film production. Built
upon the benchmark FP32 and FP32A field mixers, the
FP33 is light enough, small enough and rugged enough to
take anywhere. It features three XLR-balanced mic/line
inputs and two outputs, center detented pan pot for each
input channel, oscillator, two headphone jacks, 48v/12v
phantom and 12v T (A-B) power, tape out jack, and a monitor
input for the headphone circuit. Exceptional low noise design and
wide dynamic range make the FP-33 ideal for use with digital transmission links or digital video/audio media, including
DAT and recordable CD.
Inputs
◆ Three XLR-balanced inputs; switchable to
low-impedance mic or line level.
◆ Phantom or A-B (T) power for condenser
mics is available at each mic input.
◆ Built~in tone oscillator for level checks or
line tests.
◆ Slate microphone with automatic gain con-
trol (AGC) for take identification or for
emergency use. Slate tone for identifying
take locations during editing.
◆ Stereo monitor input allows headphone
monitoring of external sources without
interruption of mixer functions.
◆ Link switch couples mixer inputs 2 and 3
into stereo pair
Outputs
◆ Left and right XLR-balanced outputs are
mic/line switchable.
◆ Left and right tape outputs are available to
feed tape recorder inputs or other unbal-
anced aux-level inputs.
◆ 1/4˝ and 3.5 mm headphone jacks are
driven by a stereo headphone power amp
with separate level control.
FEATURES
FP-33 with carrying case,shoulder strap and mix bus cable.................................................1199.95
Controls and Indicators
◆ Center detented pop-up pan pots on each
input. Color-coded,soft touch rubberized
knobs with tactile position indicators
◆ Active,feedback~type input gain controls
permit direct input of high-level sources
without input attenuators.
◆ Dual clutched Master gain control for indi-
vidually adjusting left and right levels at
line/mic and tape outputs, as well as tone
oscillator and slate mic levels.
◆ 150Hz (6dB/octave) Lo-cut filters at each
input reduces extraneous low~frequency
interference.
◆ Built-in limiter with adjustable threshold
prevents output clipping of mixer or input
overload of amp or tape deck.
◆ LED indication of input level, peak output
level, limiter action, and battery.
◆ Illuminated VU meters for left/right chan-
nels. Preset for 0 VU = +4 dB, adjustable for
other levels.
◆ Headphone monitoring mode switch and
headphone MS matrix.
Performance
◆ Wide, flat response with extremely low
distortion and up to +1dBm output level
for studio-quality performance.
◆ Small and lightweight, the FP-33 offers
sealed input potentiometers and a steel
chassis, making it extremely rugged and
durable as well.
◆ Mix bus jack for connecting additional
FP33 or FP32A mixers
◆ Internal DIP switches provide over 4,000
different set-ups
Power
◆ Powered by two standard 9v batteries (up to
8-hours under normal conditions) that can
also supply 48v or 12v phantom power to
condenser microphones.
◆ Can also be externally powered from any 11
to 30v DC source such as battery belt pack
or car battery.
◆ A third 9v battery can be used for condenser
mics that require A-B power.
Applications Include:
◆
Remote audio recording
◆
Electronic field production (EFP)
◆
Electronic news gathering (ENG)
◆
Film production