User manual

Installation
12 Datalogic™ JavaPOS Device Services
Most of the properties of predefined Datalogic devices will never need to be
changed. One notable exception is the COM port assignments for RS-232
devices, which have to be modified if they are different from the default
value. To change the COM port for an RS-232 device, perform the following
steps:
1. Select the device’s logical name (for example, D
atalogic-6000-RS-
232-Scanner for a scanner device).
2. Select the Bus
Properties tab. Click Edit.
3. In the po
rtName field, type the number of the correct COM port. Click
OK.
4. Pull down the File
menu and select Save JposEntryRegistry. The new
value is saved.
5. Close the JER Editor.