PT Program Generator User's Manual

Error Messages
User’s Guide 177
Portable successfully
programmed
The application was successfully downloaded to the PDT.
BEL received - Aborting.
These errors indicate that PPGXfer received an unexpected
response from the PDT. Reset the PDT and try the download
again.
No response - Aborting.
Too many NAKs - Aborting
Unknown response -
Aborting.
COM port error
These errors indicate problems communicating with the PDT
via the serial port. Make sure the cable is securely connected
to both the PC and the PDT. Verify that the correct serial port
has been selected and that the serial port is functioning.
Open COM error
Set COM state error
TimeOut exceeded
WriteComm error -
Aborting.
PDT does not support
application file. Recompile
for Falcon PT40.
This error indicates that the application was created for a dif-
ferent PDT than you are downloading to. Open the applica-
tion
.scr file in PPG. Select the File > Customize
Application command and select the correct PDT type.
Save the application and select
File > Download to com-
pile the file and download it to the PDT.
User aborted The user aborted the download process.
Error Messages Description
2342.book Page 177 Thursday, July 22, 2004 8:35 AM