USER'S GUIDE Portable Data Terminals PT2000 and TopGun

Using the PT2000 and TopGun with PALPRO
24 PT2000™ & TopGun™
2. Press <F1> to use ASSETPRO, <F2> to use INVPRO, or <F3> to use
TRACKPRO.
Figure 3-10: Selecting a PALPRO application
3.
To change the application’s title or prompts, select <F3>.
Otherwise, select
<F4>.
Figure 3-11: Changing Prompts Menu
When finished changing prompts (or if <F4> was selected in
step
3), the selected application’s menu appears on the
portable’s display screen.
For information about using the individual applications, refer
to
page 27–page 29.
F1=ASSET MGMT
F3=ITEM TRACKING
F4=EXIT
¤
F2=INV MGMT
Note: If INVPRO is selected, the next screen asks the user to select
one or two prompts (refer to
page 29 for information). Make
a selection before going on to the next step.
CHANGE PROMPTS?
F3=YES
F4=NO
¤
Note: For information about changing titles and prompts, refer to
Changing Program Titles and Prompts, below.
Note: If
TRACKPRO was selected, the user is given the option of
adding a date/time stamp before getting to the application
menu. (Refer to
page 33.)
PT2000.book Page 24 Thursday, February 26, 2004 9:34 AM