User's Manual

UANPA10 V5.1 PSI Audio User Manual 4
• Do not operate the speaker in a confined environment (i.e. in a flight case) The rear panel of the
speaker should be open and permit appropriate circulation and ventilation of air for cooling
purposes. Make sure all ventilation openings are free of any obstacles.
• Do not operate or install this speaker near any kind of heat source.
• Only operate this speaker with accessories specified by PSI Audio.
• For maximum operating safety, the loudspeaker should be used with a three-wire AC power
system. Two-wire operation may cause a potential hazard.
2.2 Service
The loudspeaker contains no user-serviceable parts. Service must be performed by
qualified personnel. The primary fuse must be replaced by exactly the same type and
rating. The unit must not be opened by the user – risk of a severe electric shock.
Servicing is required when :
• the speaker has been damaged in some way, such as when the power-supply cord or plug is
damaged,
• the loudspeaker has suffered from exposure to rain or moisture,
• liquid has been spilled into the loudspeaker,
• objects have been dropped into the loudspeaker,
• the loudspeaker does not work correctly.
Spare part supply :
• For ordering, please contact your authorized dealer, mentioning your loudspeaker model and
serial number (see point 3.3.).
3 General Overview
3.1 Before you start
Special care has been taken in the packaging of your PSI Audio equipment. Before you start to
install it, please check that the following parts are included :
• Loudspeaker
• Individual frequency response diagram
• Data sheet
• PSI AUDIO User Manual (this manual)
• Additional stickers according to model