WORKABOUT PRO Hand-Held Computer With Windows Mobile 2003 SE User Manual May 4, 2005 ISO 9001 Certified Quality Management System Part No. 8100058.
© Copyright 2005 by Psion Teklogix Inc., Mississauga, Ontario This document and the information it contains is the property of Psion Teklogix Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or in any manner detrimental to the interests of Psion Teklogix Inc.
Return-To-Factory Warranty Psion Teklogix provides a return to factory warranty on this product for a period of twelve (12) months in accordance with the Statement of Limited Warranty and Limitation of Liability provided at www.psionteklogix.com/warranty. (If you are not already a member of Teknet and you attempt to view this warranty, you will be asked to register. As a member of Teknet, you’ll have access to helpful information about your Psion Teklogix products at no charge to you.
TABLE Program License Agreements . . Approvals And Safety Summary OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . .I . . . . . . . . . . . . . . . . . . . . . . . . . . . IX Chapter 1: Introduction 1.1 1.2 1.3 About This Manual . . . . . . . . . . . . . . . . . . . . . Text Conventions . . . . . . . . . . . . . . . . . . . . . . About The WORKABOUT PRO Hand-Held Computer . . 1.3.1 Features. . . . . . . . . . . . . . . . . . . . . . . . 1.3.2 The WORKABOUT PRO C Hand-Held Computer . 1.
Contents 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 Features of the WORKABOUT PRO S . . . . . . . . The Batteries . . . . . . . . . . . . . . . . . . . . . . 3.3.1 Battery Safety . . . . . . . . . . . . . . . . . . 3.3.2 Removing And Installing The Battery Pack . . 3.3.3 Battery Swap Time . . . . . . . . . . . . . . . 3.3.4 Charging The Battery . . . . . . . . . . . . . . Switching The Hand-Held On And Off . . . . . . . . The WORKABOUT PRO C Keyboard . . . . . . . . 3.5.1 Modifier Keys. . . .
Contents 4.2.1 Windows Mobile 2003 Navigation Bar . . 4.2.2 Today’s Date, Clock And Alarm. . . . . . 4.2.3 Ownership Information . . . . . . . . . . 4.2.4 E-mail Notification . . . . . . . . . . . . . 4.2.5 Task Notification . . . . . . . . . . . . . . 4.2.6 Calendar Of Upcoming Appointments. . . 4.3 Start Menu. . . . . . . . . . . . . . . . . . . . . 4.3.1 Customizing The Start Menu. . . . . . . . 4.4 New Menu. . . . . . . . . . . . . . . . . . . . . 4.4.1 Customizing The New Menu . . . . . . . 4.
Contents 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 6.12 6.13 6.14 6.15 6.16 iv Buttons Icon . . . . . . . . . . . . 6.2.1 Up/Down Control . . . . . . 6.2.2 One Shots . . . . . . . . . . 6.2.3 Keyboard Macro Keys . . . 6.2.4 Unicode Mapping . . . . . . 6.2.5 Scancode Remapping . . . . Input . . . . . . . . . . . . . . . . 6.3.1 Input Method Tab . . . . . . 6.3.2 Options–Additional Choices Menus . . . . . . . . . . . . . . . 6.4.1 Start Menu Tab . . . . . . . 6.4.2 New Menu Tab . . . . . . .
Contents 6.17 6.18 6.19 6.20 6.21 6.22 6.23 6.24 6.25 6.16.2 Wireless Tab . . . . . . . . . . . . 6.16.3 Advanced Tab . . . . . . . . . . . 6.16.4 Battery Details . . . . . . . . . . . 6.16.5 Card Slots . . . . . . . . . . . . . 6.16.6 Built-In Devices . . . . . . . . . . Regional Settings . . . . . . . . . . . . . Remove Programs . . . . . . . . . . . . . Screen Icon . . . . . . . . . . . . . . . . Scanner Settings . . . . . . . . . . . . . . 6.20.1 Decoded (Internal) Scanners . . . . 6.20.
Contents 6.25.2 Scanning For A New Device . . . . . . . . . . . . . . . . . . . 173 6.25.3 The Bluetooth GPRS Phone . . . . . . . . . . . . . . . . . . . 175 Chapter 7: Programs 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 vi Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . ActiveSync®. . . . . . . . . . . . . . . . . . . . . . . . . 7.2.1 ActiveSync Options. . . . . . . . . . . . . . . . . . 7.2.2 Scheduling Synchronization . . . . . . . . . . . . . 7.2.3 Connecting To The Internet With ActiveSync .
Contents 7.8.9 Attaching A File . . . . . . . . . . . . . . . . 7.8.10 Deleting A Message . . . . . . . . . . . . . . 7.8.11 Storage Options . . . . . . . . . . . . . . . . 7.9 MSN Messenger. . . . . . . . . . . . . . . . . . . . 7.9.1 Setting Up Your MSN Account . . . . . . . . 7.9.2 Getting Started . . . . . . . . . . . . . . . . . 7.9.3 Signing In To MSN Messenger . . . . . . . . 7.9.4 Signing Out. . . . . . . . . . . . . . . . . . . 7.9.5 Adding Contacts . . . . . . . . . . . . . . . . 7.9.
Contents 7.12.6 Data Entry Modes. . . . . . . . . . . . . . . . . . . . 7.12.7 Formatting Text . . . . . . . . . . . . . . . . . . . . . 7.12.8 Sharing Documents With Your PC . . . . . . . . . . . 7.13 Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.14 Terminal Services Client . . . . . . . . . . . . . . . . . . . . 7.14.1 Connecting To A Terminal Server . . . . . . . . . . . 7.14.2 Moving Around Terminal Services Client . . . . . . . 7.14.3 Improving Display Performance . . . . . . . .
Contents 9.2.1 Lithium Ion Battery Safety Precautions . . . . . . . . . . . Chargers And Docking Stations. . . . . . . . . . . . . . . . . . . 9.3.1 Installation–Chargers And Docking Stations . . . . . . . . 9.3.2 Power Consumption Considerations . . . . . . . . . . . . . 9.3.3 Operator Controls . . . . . . . . . . . . . . . . . . . . . . 9.3.4 Important Charger Safety Instructions . . . . . . . . . . . . 9.4 Desktop Docking Station . . . . . . . . . . . . . . . . . . . . . . 9.4.
Contents 9.10.2 Wiring Guidelines . . . . . . . . . . . . . . . . . . . 9.10.3 Using The Vehicle Cradle . . . . . . . . . . . . . . . 9.10.4 Maintaining The Vehicle Cradle . . . . . . . . . . . . 9.10.5 Powered Cradle Installation In High Voltage Vehicles 9.10.6 Powered Vehicle Cradle Installation . . . . . . . . . . 9.10.7 The Port Replicator . . . . . . . . . . . . . . . . . . . 9.11 Bluetooth Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PROGRAM LICENSE AGREEMENTS EULA TERMS (WINDOWS MOBILE) You have acquired a device ("DEVICE") that includes software licensed by Psion Teklogix from an affiliate of Microsoft Corporation ("MS"). Those installed software products of MS origin, as well as associated media, printed materials, and "online" or electronic documentation ("SOFTWARE") are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.
License Agreement Phone Functionality. If the DEVICE SOFTWARE includes phone functionality, all or certain portions of the SOFTWARE may be inoperable if you do not have and maintain a service account with an appropriate Mobile Operator, or if the Mobile Operator's network facilities are not operating or configured to operate with the DEVICE. Microsoft® Outlook® 2002.
License Agreement • USE OF THIS SOFTWARE IN ANY MANNER THAT COMPLIES WITH THE MPEG 4 VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C. If you have questions regarding this Notice, please contact MPEG LA, L.L.C.
License Agreement tions of the DEVICE Software and third party applications such as media players use DRM to play Secure Content ("DRM Software"). If the DRM Software's security has been compromised, owners of Secure Content ("Secure Content Owners") may request that MS block the ability of DRM license servers and personal computers to deliver new licenses that enable an affected DEVICE to play Secure Content. This action does not alter the DRM Software's ability to play unprotected content.
License Agreement DEVICE Software and/or its components that you are utilizing and may provide upgrades or supplements to the DEVICE SOFTWARE that may be automatically downloaded to your DEVICE. • Links to Third Party Sites. The DEVICE Software may provide you with the ability to link to third party sites through the use of the DEVICE Software. The third party sites are not under the control of MS, Microsoft Corporation, their affiliates and/or their designated agent.
License Agreement UPGRADES AND RECOVERY MEDIA. • DEVICE Software. If the DEVICE Software is provided by Psion Teklogix separate from the DEVICE on media such as a ROM chip, CD ROM disk(s) or via web download or other means, and is labeled "For Upgrade Purposes Only" you may install one (1) copy of such DEVICE Software onto the DEVICE as a replacement copy for the existing DEVICE Software, and use it in accordance with this EULA, including any additional EULA terms accompanying the upgrade DEVICE Software.
License Agreement concerning this EULA, or if you desire to contact Psion Teklogix for any other reason, please refer to the address provided in the documentation for the DEVICE. NO LIABILITY FOR CERTAIN DAMAGE. EXCEPT AS PROHIBITED BY LAW, MICROSOFT CORPORATION AND THEIR AFFILIATES SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE.
APPROVALS AND SAFETY SUMMARY FCC DECLARATION OF CONFORMITY (DoC) Applicant’s Name & Address: ASKEY COMPUTER CORP. 10F, NO. 119, ChienKang Rd., Chung-Ho, Taipei, Taiwan, R.O.C. Contact Person: Piyang Chiang Telephone No.: (510) 440-8694 47849 FREMONT BLVD. FREMONT, CA, 94538, USA US Representative’s Name & Address: PSION TEKLOGIX 1810 Airport Exchange Blvd., Suite 500 Erlanger, KY, 41018, USA Contact Person: Kyle Day Telephone No.
Approvals And Safety Summary CE Marking When used in a residential, commercial or light industrial environment the product and its approved UK and European peripherals fulfil all requirements for CE marking. R&TTE Directive 1999/5/EC This equipment complies with the essential requirements of EU Directive 1999/5/EC (Declaration available: www.psionteklogix.com). Cet équipement est conforme aux principales caractéristiques définies dans la Directive européenne RTTE 1999/5/CE.
Approvals And Safety Summary Utrustningen uppfyller kraven för EU-direktivet 1999/5/EC om ansluten teleutrustning och ömsesidigt erkännande av utrustningens överensstämmelse (R&TTE). (Förklaringen finns att läsa på: www.psionteklogix.com). Tämä laite vastaa EU:n radio- ja telepäätelaitedirektiivin (EU R&TTE Directive 1999/5/EC) vaatimuksia. (Julkilausuma nähtävillä osoitteessa: www.psionteklogix.com). L Use of the 802.11b WORKABOUT PRO C & S in France: Owing to French Government restrictions, the 802.
Approvals And Safety Summary This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Approvals And Safety Summary between the device and the product to reduce the risk of interference. If you have any reason to suspect that interference is taking place, turn off the WORKABOUT PRO and contact your cardiologist for assistance. Note: In August 1996 the Federal Communications Commission (FCC) of the US adopted an updated safety standard for human exposure to radio frequency energy emitted by FCC regulated transmitters.
Approvals And Safety Summary Important: Waste Electrical and Electronic equipment (WEEE) directive 2003/96/EC. This Product, and its accessories, comply with the requirements of the Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC. If your end-of-life Psion Teklogix product or accessory was first placed on the European Union market after August 12th, 2005, contact your local country representative for details on how to arrange recycling.
Approvals And Safety Summary CAUTION! Danger of explosion if a battery is incorrectly handled, charged, disposed of or replaced. Replace only with the same type recommended or sold by the manufacturer–i.e., Model WA3000 or Model WA3002. Dispose of used batteries according to the instructions listed under the heading “Lithium Ion Battery Safety Precautions” on page 280. Carefully review all battery safety issues.
1 INTRODUCTION 1.1 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.3 About The WORKABOUT PRO Hand-Held Computer . 1.3.1 Features . . . . . . . . . . . . . . . . . . . . . . . 1.3.2 The WORKABOUT PRO C Hand-Held Computer. 1.3.3 The WORKABOUT PRO S Hand-Held Computer . 1.3.4 Regulatory Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 . . . . . . .
Chapter 1: Introduction About This Manual 1.1 About This Manual This manual describes how to configure, operate and maintain the WORKABOUT PRO hand-held computer. Chapter 1: Introduction provides a basic overview of the WORKABOUT PRO hand-held. Chapter 2: Basic Checkout describes the steps required to get the unit ready for operation. Chapter 3: Getting To Know The WORKABOUT PRO describes the features and outlines how to charge and maintain the battery.
Chapter 1: Introduction Text Conventions 1.2 Text Conventions Note: Notes highlight additional helpful information. Important: These statements provide particularly important instructions or additional information that is critical to the operation of the equipment. Warning: These statements provide critical information that may prevent physical injury, equipment damage or data loss. 1.
Chapter 1: Introduction Features Processor: • 400 MHz Intel Xscale PXA255 Operating System: • Microsoft Windows Mobile 2003 SE Programming Environment: • • • • • HTML, XML Psion Teklogix Mobile Devices SDK Windows Mobile 2003 Standard SDK .NET Compact Framework WORKABOUT PRO Hardware Development Kit Wireless Communications: • • • Optional expansion modules for: 802.
Chapter 1: Introduction Features • - Numeric (S model) - Ergonomic ambidextrous one-hand operation - Backlit, high durability hard-capped keys Indicators and Controls - Internal speaker with volume control - LED indicating battery charge status Bar Code Applications: • • • • • Optional 2D SX5390 Imager expansion module* Optional 1D E1022 Imager expansion module* Optional 1D SE 1223HP laser scanner expansion module* Optional SE 923 laser scanner expansion module* Optional field-upgradeable/replaceable pi
Chapter 1: Introduction Features • • • • • Quick swap pack Advanced Smart Battery w/ gas gauge 3 power source options: Runs off battery, AC or automotive power supplies Built-in charger Rechargeable, user replaceable, coin cell backup battery Environmental (Standard): • • • • • Operating temp: 14ºF to 122ºF (-10ºC to +50ºC) Storage temp: -13ºF to 140ºF (-25ºC to +60ºC) Humidity: 5-95% RH non-condensing Rain/Dust: IEC 529, classification IP54 Shock: Multiple 4 ft. (1.
Chapter 1: Introduction The WORKABOUT PRO C Hand-Held Computer 1.3.2 The WORKABOUT PRO C Hand-Held Computer Figure 1.1 WORKABOUT PRO C Audio Jack Tether Port Low Insertion Force Port (LIF) Figure 1.
Chapter 1: Introduction The WORKABOUT PRO S Hand-Held Computer 1.3.3 The WORKABOUT PRO S Hand-Held Computer Figure 1.3 WORKABOUT PRO S Audio Jack Tether Port Low Insertion Force Port (LIF) Figure 1.
Chapter 1: Introduction Regulatory Labels 1.3.4 Regulatory Labels Warning: Using controls or adjustments or performing procedures other than those specified herein may result in hazardous radiation exposure. Figure 1.5 Scanner Module–Laser Warning Label Figure 1.6 End-Cap–Expansion Module Warning Figure 1.7 Back Plate–Expansion Module Warning Label Figure 1.
Chapter 1: Introduction Regulatory Labels Figure 1.9 FCC Compliance Label Figure 1.10 Standard Capacity Battery Label Figure 1.
2 BASIC CHECKOUT 2.1 Preparing The WORKABOUT PRO For Operation . . . . 2.1.1 The Main Battery . . . . . . . . . . . . . . . . . . . 2.1.2 Charging The Battery . . . . . . . . . . . . . . . . . 2.1.3 The Backup Battery. . . . . . . . . . . . . . . . . . 2.2 Turning The WORKABOUT PRO On and Off. . . . . . . 2.2.1 Installing The Battery And Switching The Unit On . 2.2.2 Switching The Unit Off (Suspend) . . . . . . . . . . 2.3 The Companion CD . . . . . . . . . . . . . . . . . . . . . 2.
Chapter 2: Basic Checkout Preparing The WORKABOUT PRO For Operation 2.1 Preparing The WORKABOUT PRO For Operation 2.1.1 The Main Battery The WORKABOUT PRO C can be powered with one of the following batteries: • Standard Battery • High-Capacity Battery, or • 3 AA alkaline batteries. The WORKABOUT PRO S can be powered with one of the following battery packs: • Standard Battery, or • High-Capacity Battery 2.1.
Chapter 2: Basic Checkout Turning The WORKABOUT PRO On and Off Important: If you are powering up a new unit, a warning message may appear on the screen indicating that the backup battery capacity is low. To recharge the internal battery, you must fully charge the WORKABOUT PRO with the main battery installed in the unit. An overnight charge is recommended. 2.2 Turning The WORKABOUT PRO On and Off 2.2.
Chapter 2: Basic Checkout Connecting The WORKABOUT PRO To A PC Enhancing Your Experience–provides access to some additional applications that you can install on your unit. Learn More–provides access to the Windows Mobile web page and the Psion Teklogix web page. About This CD–provides copyright information about the CD. Help–provides access to the main Microsoft web page and the Psion Teklogix web page. 2.
Chapter 2: Basic Checkout Resetting The WORKABOUT PRO Hand-Held A warm reset closes open applications; any unsaved data are lost. Installed programs and saved data are preserved. Note: You do not need to reset your WORKABOUT PRO after configuring the radio. Cold Reset Important: A cold reset returns the WORKABOUT PRO to factory settings. All data and settings are lost. Files and data stored in flash are preserved.
3 GETTING TO KNOW THE WORKABOUT PRO 3.1 Features Of The WORKABOUT PRO C . . . . . . . 3.2 Features of the WORKABOUT PRO S. . . . . . . . 3.3 The Batteries . . . . . . . . . . . . . . . . . . . . . 3.3.1 Battery Safety . . . . . . . . . . . . . . . . . . 3.3.2 Removing And Installing The Battery Pack . . 3.3.3 Battery Swap Time . . . . . . . . . . . . . . . 3.3.4 Charging The Battery . . . . . . . . . . . . . . 3.4 Switching The Hand-Held On And Off . . . . . . . . 3.5 The WORKABOUT PRO C Keyboard . . . . .
Chapter 3: Getting To Know The WORKABOUT PRO Features Of The WORKABOUT PRO C 3.1 Features Of The WORKABOUT PRO C Sound Port Stylus (pointing tool) LED (Light Emitting Diode) Microphone Figure 3.
Chapter 3: Getting To Know The WORKABOUT PRO Features Of The WORKABOUT PRO C End Cap Back Cover – optional scanner module fits here Battery Cover Battery Cover Fasteners Tether Port Low Insertion Force (LIF) Port Audio Jack Figure 3.
Chapter 3: Getting To Know The WORKABOUT PRO Features of the WORKABOUT PRO S 3.2 Features of the WORKABOUT PRO S Sound Port Stylus (pointing tool) LED (Light Emitting Diode) Microphone Figure 3.3 Front Of WORKABOUT PRO S 3.3 The Batteries The WORKABOUT PRO C hand-held can operate with a Standard Lithium Ion battery pack, a High Capacity Lithium Ion battery pack or three AA alkaline batteries.
Chapter 3: Getting To Know The WORKABOUT PRO Battery Safety 3.3.1 Battery Safety Important: Before attempting to install, use or charge the battery pack, it is critical that you review and follow the important safety guidelines in the section entitled “Lithium Ion Battery Safety Precautions” beginning on page 280. 3.3.2 Removing And Installing The Battery Pack Removing The Battery Cover • • Turn the fasteners at the base of the battery cover counter-clockwise to unlock the cover.
Chapter 3: Getting To Know The WORKABOUT PRO Battery Swap Time 3.3.3 Battery Swap Time Assuming the default power saving parameters and battery reserve level have not been altered, battery swap time is between 10 and 15 minutes—you will not lose data if the battery is replaced within this time frame. Keep in mind that user data is stored in a RAM-based folder by default—data in these RAM folders is lost if the main and backup batteries are completely drained, or if the unit is cold reset.
Chapter 3: Getting To Know The WORKABOUT PRO Switching The Hand-Held On And Off • • • Quad Docking Station (Model #WA4004)—can charge the battery of up to four WORKABOUT PROs inserted in the docking station. Single Battery Charger (Model #WA3001)—charges a single battery. Quad Battery Charger (Model #WA3004)—charges up to four spare Standard or High-Capacity WORKABOUT PRO battery packs. It can take up to 5 hours to charge a battery.
Chapter 3: Getting To Know The WORKABOUT PRO The WORKABOUT PRO C Keyboard 3.5 The WORKABOUT PRO C Keyboard Arrow Keys Scan Key Scan Key Display Backlight Key Contrast Key Orange Key Blue Key Figure 3.5 The Keys WORKABOUT PRO C units are designed with a 55-key alphanumeric keyboard. Along with the standard keyboard keys, these units are equipped with an and a modifier key to provide access to additional keys and system functions.
Chapter 3: Getting To Know The WORKABOUT PRO Modifier Keys Note: Almost all keys can be reprogrammed to suit your requirements. 3.5.1 Modifier Keys The , , , and keys are modifier keys. Pressing a modifier key changes the function of the next key pressed. For example, on a WORKABOUT PRO C, a square bracket is printed in orange print above the <4> key. Pressing the key followed by the <4> key displays a square bracket rather than the number 4.
Chapter 3: Getting To Know The WORKABOUT PRO Locking Modifier Keys 3.5.1.2 Note: Locking Modifier Keys The locking behaviour of the modifier keys can be changed so that, for example, pressing any of these keys once will lock the keys ‘on’. Refer to “One Shots” on page 82 for details. Note too that by default, the key is locked ‘on’ when pressed only once. When a modifier key is pressed twice to lock it ‘on’, it will remain active until it is pressed a third time to unlock or turn it off.
Chapter 3: Getting To Know The WORKABOUT PRO The Keypad Backlight The And Keys The and keys modify the function of the next key pressed and are application dependent. The Key Typically, the key moves the cursor to the next field to the right or downward. The Key Generally, this key is used as a keyboard shortcut to close the current menu, dialog box or activity and return to the previous one.
Chapter 3: Getting To Know The WORKABOUT PRO The WORKABOUT PRO S Keyboard 3.6 The WORKABOUT PRO S Keyboard Scan Key Scan Key Arrow Keys Scan Keys Scan Key FN/Blue Key ALPHA/Orange Key Display Backlight Key Figure 3.8 WORKABOUT PRO S Keyboard The WORKABOUT PRO S is equipped with a numeric keyboard. Along with standard keys, this unit is equipped with an and a modifier key to provide access to alpha keys along with additional keys and system functions.
Chapter 3: Getting To Know The WORKABOUT PRO Modifier Keys Note: Almost all keys can be reprogrammed to suit your requirements. 3.6.1 Modifier Keys The , , and keys are modifier keys. Pressing a modifier key changes the function of the next key pressed. For example, alpha keys are displayed in orange print above the numeric key <1>. Pressing the key followed by the <1> key displays the letter a rather than the number 1.
Chapter 3: Getting To Know The WORKABOUT PRO The Keys 3.6.2 The Keys The Key This key is used to access the alpha characters displayed in orange print above numeric keys <1> through <9>. The And Keys Pressing the key followed by the or arrow key activates the and keys. The Key When this key is pressed, uppercase alpha characters are displayed. Press <.> to activate this key.
Chapter 3: Getting To Know The WORKABOUT PRO Accessing Alpha Characters The Keys The WORKABOUT PRO S is equipped with five yellow keys. Two keys are located on either side of the unit, next to the screen. Three additional keys are located near the top of the keyboard. Pressing a key activates the scanner beam. For units without internal scanners, these keys are inoperable. The Function Keys— to Perform special, custom-defined functions.
Chapter 3: Getting To Know The WORKABOUT PRO Creating Uppercase Letters To choose the second letter in the sequence—in this example, the letter b: • Press the key twice to lock it ‘on’. A shift-state indicator icon in the taskbar will represent the orange key with a black frame around it to indicate that this key is locked ‘on’. • Press numeric key <2> twice to display the letter b.
Chapter 3: Getting To Know The WORKABOUT PRO The Keypad Backlight 3.6.4 The Keypad Backlight The intensity of the keypad backlight can be configured using the Backlight icon accessed by tapping on Start, Settings. Refer to “Backlight” on page 99 for details about this option. 3.7 The Display 3.7.1 Adjusting The Backlight The display backlight can be adjusted using the keyboard. • Press the Backlight key < > to cycle from the lightest to darkest settings, and then back to lightest.
Chapter 3: Getting To Know The WORKABOUT PRO Indicators • Tap on the Screen icon to display the Alignment tab. Figure 3.11 Alignment Screen • Tap on the Align Screen button, and follow the directions on the screen to align (calibrate) the screen. Note: This window provides two additional tabs: ClearType and Text Size. Tapping on the ClearType tab allows you to enable the ClearType option to smooth screen font appearance.
Chapter 3: Getting To Know The WORKABOUT PRO Audio Indicators If the unit is attached to an external power supply, the hand-held LED reflects the battery charge status. LED Behaviour Charge Status Solid Green Charge complete. Fast Blinking Green Charge in progress. Battery charged to less than 80% capacity. Slow Blinking Green Battery charged to greater than 80% of capacity. Solid Red Temperature outside charge range (0° C to 50° C). Blinking Red Battery is not charging. Battery fault. Table 3.
Chapter 3: Getting To Know The WORKABOUT PRO Monitoring The Battery And Maximizing Run Time 3.9 Monitoring The Battery And Maximizing Run Time Note: When the main battery is at 50% capacity, a ‘low battery’ warning is displayed. When the battery is at approximately 10% capacity, a ‘very low main battery’ notification bubble appears. Under normal operating conditions, fully charged Standard Batteries hold a charge for up to 8 hours. High-Capacity batteries can hold a charge for up to 12 hours.
Chapter 3: Getting To Know The WORKABOUT PRO Uploading Data In A Docking Station • • • Always charge batteries to at least 40 to 60% before storing them. Batteries can be damaged by an over-discharge phenomenon that occurs when an empty battery is stored for a long period of time such that the cell voltage drops below a lower limit. To minimize storage degradation, recharge stored batteries to 40 to 60% every 4 or 6 months to prevent over-discharge damage.
Chapter 3: Getting To Know The WORKABOUT PRO The SD/MMC Card—Adding Memory 3.12 The SD/MMC Card—Adding Memory To add additional non-volatile memory to your hand-held, you can insert a Secure Digital/Multi-Media Card (SD/MMC) through the battery compartment. 3.12.1 Inserting The Card • Remove the battery cover and the battery. A hinged door at the top of the battery compartment protects the connectors. Hinged SD door SD/MMC Card Figure 3.
Chapter 3: Getting To Know The WORKABOUT PRO General Maintenance 3.13 General Maintenance 3.13.1 Caring For The Touchscreen The top of the touchscreen is a thin, flexible polyester plastic sheet with a conductive coating on the inside. The polyester can be permanently damaged by harsh chemicals and is susceptible to abrasions and scratches. Using sharp objects on the touchscreen can scratch or cut the plastic, or crack the internal conductive coating.
4 WORKING WITH WINDOWS MOBILE 2003 SE 4.1 Navigating In Windows Mobile 2003 SE And Applications . 4.1.1 Navigating Using A Touchscreen And Stylus . . . . . 4.2 Windows Mobile 2003 Desktop–Today Screen. . . . . . . . 4.2.1 Windows Mobile 2003 Navigation Bar. . . . . . . . . 4.2.2 Today’s Date, Clock And Alarm . . . . . . . . . . . . 4.2.3 Ownership Information . . . . . . . . . . . . . . . . . 4.2.4 E-mail Notification . . . . . . . . . . . . . . . . . . . 4.2.5 Task Notification . . . . . . . . . . . . . .
Chapter 4: Working With Windows Mobile 2003 SE Navigating In Windows Mobile 2003 SE And Applications 4.1 Navigating In Windows Mobile 2003 SE And Applications Graphic user interfaces like Windows Mobile 2003 SE for portable devices or desktop Windows (2000, XP, etc.) utilize ‘point and click’ navigation. On the WORKABOUT PRO, this is accomplished using a touchscreen and stylus rather than a mouse. 4.1.
Chapter 4: Working With Windows Mobile 2003 SE Windows Mobile 2003 Navigation Bar The Today screen displays all your important information–tasks, unread e-mails and upcoming appointments–all in one place. The Start menu provides access to everything else you’ll need. 4.2.1 Windows Mobile 2003 Navigation Bar The navigation bar along the top of the screen provides icons that, when tapped, open their associated programs.
Chapter 4: Working With Windows Mobile 2003 SE Today’s Date, Clock And Alarm Volume Control Tapping on this icon displays a sliding tab that allows you to adjust the speaker volume or turn the speaker on and off. Figure 4.4 Volume Adjustment Shortcut Clock Tapping on this icon displays a bubble which indicates the current date and time. It also indicates the power connection–either AC or battery. Finally, this icon lists any upcoming appointments. Figure 4.5 Time Shortcut 4.2.
Chapter 4: Working With Windows Mobile 2003 SE Today’s Date, Clock And Alarm The Clock & Alarms screen is displayed. Figure 4.6 Clock Screen • Tap on the drop-down menu arrows to set the GMT, time and date. An option to set the date and time for a visiting time zone is also available. To set an alarm: • Tap on the Alarms tab. Figure 4.7 Alarms Screen You can set a maximum of three alarms. • • 48 Tap in the checkbox to enable an alarm.
Chapter 4: Working With Windows Mobile 2003 SE Ownership Information • • Tap on the clock and set the time of the alarm. Keep in mind that it can only be set for hours–minutes cannot be specified. Tap on OK to save your changes. 4.2.3 Ownership Information This option allows you to add your personal information to the WORKABOUT PRO. Some of this information will be displayed in the desktop Today screen. • Tap on Owner to display a screen in which you can type information.
Chapter 4: Working With Windows Mobile 2003 SE Task Notification 4.2.5 Task Notification Tasks lets you create lists of entries representing your responsibilities, upcoming projects, and so on. If you’ve assigned any tasks, this option lets you know how many active tasks you have. Note: • You can synchronize the Task Notification option using ActiveSync so that any tasks are displayed on your WORKABOUT PRO as well as your PC. Refer to “ActiveSync Options” on page 182 for details.
Chapter 4: Working With Windows Mobile 2003 SE Task Notification Editing A Task • Tap on a task in the task list to select it, and then tap the Edit menu to display a detailed task screen where you can define task characteristics. Figure 4.10 Task Details Screen Each of the nine items in this screen, when tapped, displays a drop-down menu where you can choose from a list of options, or you can type the text directly using either the soft keyboard or the WORKABOUT PRO keyboard.
Chapter 4: Working With Windows Mobile 2003 SE Calendar Of Upcoming Appointments Limiting The Tasks Displayed In The Task Screen • Tap on the drop-down list in the upper left-hand corner of the screen. You can choose Recent, All Tasks, No Categories, Active Tasks, or Completed Tasks. The tasks are displayed in the screen according to the preference you chose. 4.2.
Chapter 4: Working With Windows Mobile 2003 SE Creating And Editing Appointments 4.2.6.1 • Creating And Editing Appointments In the Calendar screen, tap the New menu. Figure 4.12 Appointment Detail Screen • • In the Subject field, name the appointment. Type additional information about the appointment in the other fields provided. Note: Refer to “Adding Reminders” on page 53 for details about reminders. Refer to “Using Categories” on page 54 for information about this option. • 4.2.6.
Chapter 4: Working With Windows Mobile 2003 SE Using Categories • • • 4.2.6.3 In the second Reminder field, tap on the number in the field to display a drop-down menu where you can define a numeric value of 1, 5, 10, 15, 30. Tap on minute(s) to display a drop-down menu from which you can choose the time unit for your reminder–minute(s), hour(s), day(s) or week(s). Tap OK to finish. You are returned to the view you were in before adding the reminder.
Chapter 4: Working With Windows Mobile 2003 SE Start Menu 4.3 Start Menu To display the Start menu: • Tap on the Start button in the upper-left corner of the Windows Mobile 2003 SE navigation bar. Start Button Navigation Bar 7 custom-chosen programs 5 most recently used programs Windows Mobile command centre Figure 4.15 Start Menu • Tap on the Start menu item with which you want to work. 4.3.
Chapter 4: Working With Windows Mobile 2003 SE New Menu • In the Personal tab, tap on the Menus icon. • Tap the stylus in the checkboxes next to the items you want to appear in your Start menu. When you’ve finished your selections, tap on OK. Figure 4.17 Menus Screen Note: Keep in mind that you are limited to a maximum of 7 programs choices at one time. 4.4 New Menu The New menu provides quick access to a number of options such as tasks, contacts, along with some applications.
Chapter 4: Working With Windows Mobile 2003 SE Customizing The New Menu 4.4.1 Customizing The New Menu To choose from a list of possible items to be displayed in the New menu: • Tap on Start, Settings followed by the Menus icon. Tap on the New Menu tab. Figure 4.19 New Menu Tab • Tap in the checkbox next to the items you want listed in the New menu. Checkmarked items will be displayed in the New menu. 4.
Chapter 4: Working With Windows Mobile 2003 SE Creating A New Folder Documents are automatically stored here. Tap on a folder to open it Menus contain application-specific commands Soft keyboard Internal file storage Storage card Shared network files Figure 4.20 File Explorer Screen. 4.5.1 Creating A New Folder • • • • Tap Start, File Explorer. Tap Edit in the menu bar. Tap New Folder. Use the WORKABOUT PRO keyboard or the soft keyboard to assign a name to the folder. 4.5.
Chapter 4: Working With Windows Mobile 2003 SE Deleting A File • • Press and hold the stylus in a blank area of the screen—away from other icons—until a pop-up menu is displayed. Tap Paste to copy the file to the new location. 4.5.4 Deleting A File • • Press and hold the stylus on the file or folder you want to delete until a pop-up menu is displayed. Tap Delete to remove the file. 4.
Chapter 4: Working With Windows Mobile 2003 SE Pop-Up Menus 4.6.2 Pop-Up Menus Pop-up menus are available in many screens and programs. They offer quick access to a group of useful commands in addition to those available in the menu bar. To display a pop-up menu: • Gently press and hold the stylus on the screen. A ring of dots is displayed on the screen followed by a pop-up menu. Figure 4.22 Pop-Up Menu • Tap on the command you want to execute. 4.7 The Taskbar Taskbar Soft keyboard Menu Figure 4.
Chapter 4: Working With Windows Mobile 2003 SE Programs–Using Applications The WORKABOUT PRO is equipped with a taskbar at the bottom of the screen. It displays menus and an icon representing the soft keyboard. The taskbar also displays active modifier keys–, , , and . When a modifier key is pressed, the soft keyboard icon located in the right-hand corner of the taskbar is replaced by the shift-state indicator icon.
Chapter 4: Working With Windows Mobile 2003 SE Settings Closing An Application • • Tap on Start, Settings. Tap on the System tab and then the Memory icon–the Memory screen is opened. Tap on the Running Program tab to view a list of running applications. Figure 4.25 Memory Screen–Running Programs Tab • Tap on the application you want to shut down, and then tap on the Stop button. Tap on Stop All if you want to shut down all running applications, or tap on Activate to enable an application. 4.
Chapter 4: Working With Windows Mobile 2003 SE Help 4.10 Help Tapping on the Help option displays a screen in which you can tap on the topic about which you require information. Figure 4.27 Help Screen 4.11 Entering Text Note: For additional information about tailoring text entry using the soft keyboard, the transcriber along with the block recognizer and letter recognizer, refer to “Input” on page 89.
Chapter 4: Working With Windows Mobile 2003 SE Soft Keyboard 4.11.1 Soft Keyboard The soft keyboard is laid out just like the keypad on a PC keyboard. By tapping the stylus on letters and modifier keys like the key, you can enter text in a document. Figure 4.28 Soft Keyboard If the soft keyboard is not already displayed: • • Tap on the arrow in the keyboard icon at the bottom-right corner of the screen, and choose Keyboard from the pop-up menu.
Chapter 4: Working With Windows Mobile 2003 SE The Transcriber The Transcriber menu and icon bars are displayed at the bottom of the document. Transcriber icon Figure 4.29 Transcriber Screen • Use your stylus to write a few words anywhere on the screen. After a few seconds, your words are recognized (or not) and transcribed into your document. Note: Proper character recognition is more successful if you write using large letters.
Chapter 4: Working With Windows Mobile 2003 SE Block Recognizer And Letter Recognizer 4.11.3 Block Recognizer And Letter Recognizer While the Transcriber attempts to recognize natural handwriting and transcribe it, Block Recognizer and Letter Recognizer attempt to teach you how to conform your handwriting to what the hand-held can recognize. Block Recognizer • Open a document, and tap on the arrow in the bottom-right corner of the screen. Choose Block Recognizer.
Chapter 4: Working With Windows Mobile 2003 SE Block Recognizer And Letter Recognizer Letter Recognizer Recognizer Icon Bar Input Panel Figure 4.31 Letter Recognizer There are two points to remember when using Letter Recognizer. First, limit your writing to the Letter Recognizer Input Panel–do not write in the body of the document. Second, write only lowercase letters with your stylus. • • • • Tap on the ? icon in the Recognizer Icon Bar to display the Character Recognizer screen.
CONNECTING TO A LAN WITH 802.11b 5 5.1 Installing The 802.11b Radio. . . . . . . . . . . . . . . . . . . . . . . . . . 71 5.2 Connecting To A LAN Using An 802.11b Radio 5.2.1 Entering New Settings . . . . . . . . . . . 5.2.2 Authentication Settings . . . . . . . . . . 5.2.3 Deleting A Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 . 74 . 75 .
Chapter 5: Connecting To A LAN With 802.11b Installing The 802.11b Radio 5.1 Installing The 802.11b Radio Note: An instruction sheet is enclosed with each Psion Teklogix 802.11b radio to walk you through the installation steps. The WORKABOUT PRO operates with an 802.11b Direct Sequence Spread Spectrum radio. The CF (Compact Flash) card is easily installed in the unit. • To begin, remove the battery pack. If your unit is using AC power, disconnect it. • Remove the stylus from the end-cap.
Chapter 5: Connecting To A LAN With 802.11b Installing The 802.11b Radio • • Slide the SW1401 switch to the left to shut off internal battery power. With the back of the hand-held facing you, slide the radio (label up) into the CF slot at the top of the unit until it clicks into place. Figure 5.2 Inserting A CF Card Once the radio is installed, you’ll need to attach a mechanical card stopper to hold the radio in place. Replacements can be ordered separately. Figure 5.
Chapter 5: Connecting To A LAN With 802.11b Connecting To A LAN Using An 802.11b Radio • Fit the mechanical stopper over the card, and use the four screws provided to secure the stopper in place. Tighten the screws to a torque of 2 kg(f)-cm (0.145 lb-ft, 0.196 N-m), or until finger tight. Mechanical Stopper Installed Figure 5.4 Mechanical Stopper Installed • • • Slide the SW1401 switch to the right to turn power back on. Replace the end-cap, and tighten the four Phillips screws to secure the end-cap.
Chapter 5: Connecting To A LAN With 802.11b Entering New Settings Note: To change network settings, tap the stylus on a network. If the network for which you are looking is not listed, tap on ‘Add new...’ and follow the instructions on the screen. 2. In the Networks to access drop-down menu, choose All Available, Only access points or Only computer-to-computer depending on the type of network(s) to which you connect. 3.
Chapter 5: Connecting To A LAN With 802.11b Authentication Settings 5.2.2 Authentication Settings You can add a network automatically when a network is detected, or you can enter setting information manually. Contact your network administrator for the appropriate authentication information. Note: If the network is automatically detected, you can skip step 1 and step 2. 1. To manually enter new settings, tap on Start, Settings. Tap on the Connections tab. 2. Tap on the Network Cards icon.
Chapter 5: Connecting To A LAN With 802.11b Deleting A Network 6. To increase security, tap the 802.1x tab followed by Use IEEE 802.1x network access control. 802.1x is the IEEE standard that offers additional security for local area networks. It provides authentication for user devices attached to an Ethernet network, whether wired or wireless. A security protocol packet such as TLS or MD5 encapsulated in an “EAP” is used in conjunction with the “802.1x” standard to authenticate users at the MAC layer.
6 SETTINGS 6.1 Personal Settings . . . . . . . . . 6.2 Buttons Icon. . . . . . . . . . . . 6.2.1 Up/Down Control. . . . . . 6.2.2 One Shots . . . . . . . . . . 6.2.3 Keyboard Macro Keys . . . 6.2.4 Unicode Mapping. . . . . . 6.2.5 Scancode Remapping . . . . 6.3 Input . . . . . . . . . . . . . . . . 6.3.1 Input Method Tab . . . . . . 6.3.1.1 Word Completion . 6.3.2 Options–Additional Choices 6.4 Menus . . . . . . . . . . . . . . . 6.4.1 Start Menu Tab . . . . . . . 6.4.2 New Menu Tab . . . . . . . 6.
Chapter 6: Settings 6.15.1 Main Tab . . . . . . . . . . . . . . . . . . . . . . . . 6.15.2 Storage Card . . . . . . . . . . . . . . . . . . . . . . 6.15.3 Running Programs . . . . . . . . . . . . . . . . . . . 6.16 Power Icon . . . . . . . . . . . . . . . . . . . . . . . . . . 6.16.1 Battery Tab. . . . . . . . . . . . . . . . . . . . . . . 6.16.2 Wireless Tab . . . . . . . . . . . . . . . . . . . . . . 6.16.3 Advanced Tab . . . . . . . . . . . . . . . . . . . . . 6.16.4 Battery Details . . . . . . . . . .
Chapter 6: Settings 6.20.2.5 EAN 8 . . . . . . . . . . . . . . . . . . . . . . . 6.20.2.6 EAN 13 Settings . . . . . . . . . . . . . . . . . . 6.20.2.7 UPC/EAN Shared Settings . . . . . . . . . . . . . 6.20.2.8 Interleaved 2 of 5 . . . . . . . . . . . . . . . . . . 6.20.2.9 Discrete 2 of 5 . . . . . . . . . . . . . . . . . . . 6.20.2.10 Code 11 . . . . . . . . . . . . . . . . . . . . . . 6.20.2.11 Codabar . . . . . . . . . . . . . . . . . . . . . . 6.20.2.12 Code 93 . . . . . . . . . . . . . . . . . . . . .
Chapter 6: Settings 6.21.4 Advanced Information . . . . . . . . . . . . . . . . 6.21.4.1 Entering A PIN Number . . . . . . . . . . 6.21.4.2 Error States . . . . . . . . . . . . . . . . . 6.21.5 Tools Menu . . . . . . . . . . . . . . . . . . . . . 6.21.5.1 Data Connection Configuration. . . . . . . 6.21.5.2 Security Configuration . . . . . . . . . . . 6.21.5.3 Network Configuration . . . . . . . . . . . 6.21.5.4 Driver Mode Configuration . . . . . . . . . 6.21.5.5 Modem Information. . . . . . . . . . . . .
Chapter 6: Settings Personal Settings The Settings screen is divided into three tabs–Personal, System and Connections • Tap on Start, Settings to display this screen. Figure 6.1 Settings Tabs 6.1 Personal Settings The Personal tab allows you to tailor the general behaviour of your WORKABOUT PRO, defining input methods, Start menu options, owner information, password assignment, and sound specifications. You can also determine which items will appear in the Today screen. 6.
Chapter 6: Settings Up/Down Control 6.2.1 Up/Down Control Figure 6.2 Buttons–Up/Down Control Tab Sliding the Delay before first repeat bar to the left decreases the delay between key repeats while sliding the bar to the right increases the repeat delay time. Sliding the Repeat rate bar to the left slows the rate at which a key repeats when pressed. Sliding the bar to the right increases the key repeat rate. 6.2.2 One Shots Figure 6.
Chapter 6: Settings One Shots and –you have the following options in the drop-down menu: Lock, OneShot, and OneShot/Lock. When a modifier key is pressed, it is represented in the soft keyboard in the taskbar at the bottom of the screen. Modifier keys that are locked ‘on’ are bordered in a black frame. Important: Once you’ve assigned a One Shot mode to a modifier key, you need to tap on the button at the top of the tab to activate your selection.
Chapter 6: Settings Keyboard Macro Keys 6.2.3 Keyboard Macro Keys Figure 6.4 Macro Dialog Box A macro has 20 programmable characters (or “positions”). The macro keys can be programmed to replace frequently used keystrokes, along with the function of executable keys including , and (-), function keys, and arrow keys. Recording And Saving A Macro You can program up to 15 macro keys.
Chapter 6: Settings Unicode Mapping • • Type the macro sequence you want to assign to the Macro key. You can type text and numbers, and you can program the function of special keys into a macro. When you’ve finished recording your macro sequence, tap on the Stop Recording button. A new screen–Verify Macro–displays the macro sequence you created. • Tap on the Save button to save your macro. Executing A Macro • Press the macro key to which you’ve assigned the macro.
Chapter 6: Settings Unicode Mapping indicates that the character “a” is represented by the Unicode value “0061”, and so on. Keep in mind that Unicode configurations are represented as hexidecimal rather than decimal values. All user-defined Unicode mappings are listed in the Unicode Mapping tab in order of virtual key value, and then by order of the shift state. If a Unicode mapping is not listed, the Unicode mapping is mapped to the default Unicode value.
Chapter 6: Settings Scancode Remapping 6.2.5 Scancode Remapping A scancode is a number that is associated with a physical key on a keyboard. Every key has a unique scancode that is mapped to a virtual key, a function, or a macro. Scancode Remapping allows you to change the functionality of any key on the keyboard. A key can be remapped to send a virtual key (e.g. VK_F represents the ‘F’ key; VK_RETURN represents the key, etc.), perform a function (e.g.
Chapter 6: Settings Scancode Remapping Adding A Remap To add a new remapping: • Tap the Add button at the bottom of the dialog box. The Remap Scancode dialog box is displayed. Figure 6.9 Remapping A Key • Note: Type the scan code in hexidecimal in the field labelled Scancode. The ‘Label’ field displays the default function of the scancode you are remapping.
Chapter 6: Settings Input Editing A Scancode Remap To edit a scancode: • • • In the Scancode Remapping tab, tap on the remap you want to edit. Tap on the Edit button, and make the appropriate changes. Tap on OK to save your changes. Removing A Remap To delete a remap: • • In the Scancode Remapping tab, highlight the scancode you want to delete, and tap on the Remove button. Tap on OK. 6.
Chapter 6: Settings Input Method Tab Block Recognizer Block Recognizer teaches you how to conform your handwriting to what the hand-held can recognize. Important: Refer to “Block Recognizer And Letter Recognizer” on page 66 for additional details. Keyboard Options Figure 6.11 Keyboard Options This screen is displayed when you choose Keyboard in the Input method drop-down menu. You can use it to customize the soft keyboard.
Chapter 6: Settings Input Method Tab To display additional letter recognition options, tap on the Options button in the Letter Recognizer screen. Figure 6.12 Letter Recognizer Quick Settings These options allow the Letter Recognizer to better interpret any specialized strokes and accents you may wish to use. Transcriber Options When you choose Transcriber as the input method, three tabs of options are available to you–Quick Settings, Inking and Advanced. Figure 6.
Chapter 6: Settings Input Method Tab Quick Settings The Quick Settings tab allows you choose the writing direction–the icons indicate direction. In addition, you can choose to enable or disable the display of the Intro screen and the sound each time you launch the Transcriber. Inking In the Inking tab you are presented with a number of options. Recognition Delay allows you to determine the time delay between writing something on the Transcriber screen and its recognition into printed text. Figure 6.
Chapter 6: Settings Word Completion Advanced In this tab, Shorthand allows you to create a shortened word that the Transcriber will recognize and expand into a complete word automatically. You can also insert data such as a date or run a program. Figure 6.15 Transcriber–Advanced Tab 6.3.1.1 Word Completion Figure 6.16 Word Completion Tab This tab speeds the writing process regardless of which input method you choose.
Chapter 6: Settings Options–Additional Choices 6.3.2 Options–Additional Choices Figure 6.17 Input Options Tab This tab offers a few choices including choosing a voice recording format, zoom percentage for writing and typing, automatic capitalization of the first letter in a sentence and automatic scrolling when you’ve reached the bottom of the screen. 6.4 Menus Tapping on Start, Settings, Menu icon displays options to you customize menus. 6.4.
Chapter 6: Settings New Menu Tab 6.4.2 New Menu Tab This tab allows you to determine the items that will be listed in the New menu that is available in the Today screen taskbar. Figure 6.19 New Menu Tab • If it’s not already checked, tap in the checkbox next to Turn on New button menu and then choose the items you want to appear in the New menu. You’ll notice that an arrow is displayed next to the New menu in the taskbar attached to programs such as Excel, Word and so on.
Chapter 6: Settings Password 6.6 Password Figure 6.20 Password And Hint Tab • To assign a password, enable Prompt if device unused for, and choose the amount of idle time after which you will be prompted to enter a password. • In the Password type drop-down menu, choose the type of password you want to assign. • Enter your password in the Password field. In the Hint tab, you can enter a description to help you remember your password. 6.
Chapter 6: Settings Notifications 6.7.2 Notifications Figure 6.22 Notifications Tab This tab allows you to determine how you are notified about different events. • • Choose an event from the Events drop-down menu. Choose the type of reminder–a special sound, a message or a flashing light –from the drop-down menu next to Play sound. 6.8 Today Screen This icon allows you to tailor the appearance of the Today screen– the desktop screen. 6.8.1 Appearance Figure 6.
Chapter 6: Settings Items 6.8.2 Items Figure 6.24 Items Tab This tab allows you to choose and sort the items that will be listed in the Today screen. • • Tap in the checkbox to the left of the items you want displayed in the Today screen. To rearrange the list of items, highlight the item you want to move up or down and tap on the Move Up or Move Down button. Keep in mind that the Date cannot be moved. 6.
Chapter 6: Settings About 6.10 About Tapping on Start, Settings, System tab, and then the About icon displays a grouping of tabs that provide device information. Version Tab This tab outlines the Windows Mobile 2003 SE version, processor information, memory size and a description of the expansion card, if one is in use. Device ID Tab This tab provides fields in which you can assign a Device name and Description (optional) for the WORKABOUT PRO.
Chapter 6: Settings Battery Power 6.12.1 Battery Power Figure 6.26 Battery Tab This tab allows you to tailor the unit’s backlight behaviour to best preserve battery life. • To define how long the backlight should stay on when the WORKABOUT PRO is not in use, tap in the checkbox to the left of Turn off backlight if device is not used for. • Tap on the drop-down menu, and choose the number of seconds or minutes the backlight will remain on when the hand-held is idle.
Chapter 6: Settings Intensity 6.12.3 Intensity Figure 6.28 Intensity Tab This tab is used to adjust the light intensity of the display backlight and the keyboard backlight. Sliding the bar to the left lowers the light intensity, and sliding it to the right raises the intensity. 6.13 Certificates A public key is transmitted as part of a certificate. The certificates listed in the Certificates tabs ensure that the submitted public key is, in fact, the public key that belongs to the submitter.
Chapter 6: Settings Certificates Personal Tab Figure 6.29 Personal Tab The Personal tab lists the name of the certificate issuer and the expiration date. You can tap on an item in the list to view additional information about a particular certificate. • • To view more information about a personal certificate, tap on a certificate in the list. To delete a certificate, tap and hold the stylus on the item you want to delete until a pop-up menu is displayed. Tap on the Delete command.
Chapter 6: Settings Choosing A Certificate 6.13.1 Choosing A Certificate Normally, certificates already configured for your network are chosen automatically by the WORKABOUT PRO. If a certificate cannot be chosen automatically, you must choose it from the Certificates list. • To choose a certificate, tap the desired certificate. Your WORKABOUT PRO will connect automatically. 6.
Chapter 6: Settings Storage Card 6.15.2 Storage Card Figure 6.32 Storage Card Tab The Storage Card screen indicates the total storage card memory along with the amount in use. 6.15.3 Running Programs Figure 6.33 Activating And Closing Applications This tab acts as a task manager, allowing you to activate or stop any running programs. To close an application: • Tap on the application(s) you want to end, and then tap on the Stop button.
Chapter 6: Settings Power Icon Note: Keep in mind that the ‘X’ button in the upper-right corner of an application screen does not close the application–it only minimizes it. 6.16 Power Icon This icon allows you to view and manage battery use. 6.16.1 Battery Tab Figure 6.34 Battery Tab This tab allows you to view the remaining battery capacity of the main battery and the internal, backup battery. 6.16.2 Wireless Tab Figure 6.
Chapter 6: Settings Advanced Tab 6.16.3 Advanced Tab Figure 6.36 Advanced Tab The Advanced tab allows you to manage battery consumption. On Battery Power When the WORKABOUT PRO is operating on battery power, this option allows you to determine how long the unit will remain on when it is not in use. • Tap in the checkbox to the left of On battery power to enable this option. Tap in the drop-down menu to choose the number of minutes your unit can remain idle before it shuts down.
Chapter 6: Settings Battery Details 6.16.4 Battery Details Figure 6.37 Battery Details Tab This tab lists the specifications and battery capacity status of the battery installed in the WORKABOUT PRO. This is a view-only screen. 6.16.5 Card Slots Figure 6.38 Card Slots Tab When you enable one or more of the options listed in this tab, power is supplied to the enabled slot(s). Tapping on the Apply button activates your choices.
Chapter 6: Settings Built-In Devices 6.16.6 Built-In Devices Figure 6.39 Built-In Device Tab This tab allows you to enable power to the device(s) installed in your unit. Keep in mind that contents of this screen varies depending on the devices installed in your hand-held. Tapping on the Apply button activates your selections. 6.17 Regional Settings To display the Regional Settings screen, tap on Start, Settings, and then tap on the System tab followed by the Regional Settings icon. Figure 6.
Chapter 6: Settings Remove Programs Once you’ve selected a language and region, you may need to adjust the way numbers, currency, the time and the date appear in your WORKABOUT PRO. • Tap on the tab associated with each of the items and choose how you want items to be displayed on your WORKABOUT PRO. 6.18 Remove Programs Figure 6.41 Remove Programs Screen Tapping on the Remove Programs icon displays a screen listing the programs that can be removed from your unit.
Chapter 6: Settings Scanner Settings • Tap on the System tab, and then tap on the Screen icon. Figure 6.42 Alignment Screen Important: Refer to “Aligning (Calibrating) The Touchscreen” on page 36 for details about this option. 6.20 Scanner Settings The Teklogix Scanners icon in the Settings menu provides access to dialog boxes in which you can tailor bar code options and choose the bar codes your scanner will recognize.
Chapter 6: Settings Decoded (Internal) Scanners The Scanner The dropdown menu to the right of the Scanner option allows you to choose from one of the following scanner types used with your hand-held: Decoded (internal), Decoded (Intermec ISCP) and Imager. The symbologies listed in the Barcodes tab change to reflect the scanner you choose and the bar codes it supports. Important: To improve the decode speed and performance, enable only those codes that are required by the application.
Chapter 6: Settings Options — Decoded (Internal) Scanner 6.20.1.1 Options — Decoded (Internal) Scanner Dot Time (msec) The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner switches to a normal scan sweep. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value of 0 msec, 200 msec or 400 msec. A value of 0 (zero) disables the target dot.
Chapter 6: Settings Options — Decoded (Internal) Scanner Linear security level 1 specifies that the following code types must be successfully read twice before being decoded: Code Type Length Codabar All MSI Plessey 4 or less D 5 of 5 8 or less I 2 of 5 8 or less Table 6.1 Linear Security Level 1 Linear security level 2 specifies that all types of codes must be successfully read twice before being decoded.
Chapter 6: Settings Data Options — Decoded (Internal) Scanner 2D Raster Height And 2D Raster Expand Rate (not supported) These parameter determine the laser pattern’s height and rate of expansion. Note: These parameters are only used when either Programmable Raster or Always Raster is assigned to the “2D Scanning Mode” parameter. “2D Raster Height” and “2D Raster Expand Rate” are intended for very specific applications, and are usually not required for normal scanning purposes.
Chapter 6: Settings Code 39 When this parameter is enabled, the scanner transmits data from PDF417 and MicroPDF417 bar codes containing Character Set ECIs, even when the ECI Protocol is disabled. ECI Decoder (not supported) Setting this parameter to on enables the scanner to interpret any Extended Channel Interpretations (ECIs) supported by the scanner. This parameter has no effect on symbols that were not encoded using ECIs.
Chapter 6: Settings Code 39 Set Length L1 And Set Length L2 Lengths for “Code 39” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be decoded by your scanner. Figure 6.
Chapter 6: Settings Code 39 Full ASCII If this parameter is enabled, the characters +, %, and / are used as escape characters. The combination of an escape character and the next character is converted to an equivalent ASCII character. Decode Performance If this parameter is enabled, one of three decode levels can be chosen in the “Decode Performance Level” parameter. Decode Perf. Level This parameter provides three levels of decode performance or “aggressiveness” for Code 39 symbols.
Chapter 6: Settings Code 128 Strip Leading This parameter determines the number of characters that will be removed from the beginning of the bar code before the prefix character is added. Note: For Code 39 bar codes, the “AIAG Strip” is performed before the “Strip Leading”. Strip Trailing The value entered in this parameter determines the number of characters that will be removed from the end of the bar code before the suffix character is added. 6.20.1.
Chapter 6: Settings EAN 13 6.20.1.5 EAN 13 Enabled Set this parameter to on to enable “EAN 13”. Prefix/Suffix Prefix Char This character, if non-zero, is added before a successfully decoded bar code. Press the key you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of the keypress is displayed. Suffix Char This character, if non-zero, is added after a successfully decoded bar code. Press the key you want to insert in the dialog box attached to this parameter.
Chapter 6: Settings UPC A Prefix/Suffix Refer to page 119 for details. 6.20.1.7 UPC A Enabled Set this parameter to on to enable “UPC A”. UPC-A, Check Digit If you enable this parameter, the check digit is included with the decoded bar code data.
Chapter 6: Settings UPC/EAN Shared Settings UPC-E And UPC-E1 Preamble When you double-tap on one of these parameters, a dialog box is displayed where you can choose one of three options for lead-in characters for UPC-E and UPC-E1 symbols transmitted to the host device: System Char – system character transmitted with the data, Country code and System Char – both the country code (“0” for USA) and system character are transmitted with the data or None – no preamble is transmitted.
Chapter 6: Settings Codabar Supp. Redundancy With “Autodiscriminate” selected in the “Supplementals” parameter, “Supp. Redundancy” adjusts the number of times a symbol without supplementals is decoded before transmission. When you double-tap on this parameter, a dialog is displayed in which you can enter a value between 2 and 20. A value of 5 or above is recommended when Autodiscriminate is selected and you are decoding a mix of UPC/EAN symbols with and without supplementals.
Chapter 6: Settings Code 93 Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be recognized by your scanner. Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 5 to 55.
Chapter 6: Settings Interleaved 2 of 5 Field Size/Char Refer to page 117 for details. 6.20.1.12 Interleaved 2 of 5 Enabled Set this parameter to on to enable “Interleaved 2 of 5” . Set Length L1 And Set Length L2 Lengths for “Interleaved 2 of 5” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).
Chapter 6: Settings MSI Plessey 6.20.1.13 MSI Plessey Enabled Set this parameter to on to enable “MSI Plessey”. Set Length L1 And Set Length L2 Lengths for “MSI Plessey” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).
Chapter 6: Settings Discrete 2 of 5 6.20.1.14 Discrete 2 of 5 Enabled Set this parameter to on to enable “Discrete 2 of 5”. Set Length L1 And Set Length L2 Lengths for “Discrete 2 of 5” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).
Chapter 6: Settings 2D RSS Code (not supported) If Code 128 Emulation is enabled, the following Micro PDF-417 symbols are transmitted with one of the following prefixes: ]C1 if the first codeword is 903-907, 912, 914, 915 ]C2 if the first codeword is 908 or 909 ]C0 if the first codeword is 910 or 911 If Code 128 Emulation is set to off, the Micro PDF-417 symbols are transmitted with one of the following prefixes: ]L3 ]L4 ]L5 if the first codeword is 903-907, 912, 914, 915 if the first codeword is 908 or 90
Chapter 6: Settings Composite (not supported) Field Size/Char Refer to page 117 for details. 6.20.1.18 Composite (not supported) Important: To successfully read this type of bar code, the two types of symbologies included in a composite bar code must be enabled. In addition, “Center Bar Code Only” must be disabled. A composite symbol includes multi-row 2D components making it compatible with linear and area CCD scanners along with linear and rastering laser scanners.
Chapter 6: Settings Code 39 6.20.2.1 Code 39 Enable Setting this parameter to on enables “Code 39”. Field Size/Char Refer to page 117 for details. 6.20.2.2 Code 128 Setting this parameter to on enables “Code 128”. Field Size/Char Refer to page 117 for details. 6.20.2.3 UPC A Settings Enabled Set this parameter to on to enable “UPC A” bar code scanning recognition. Prefix/Suffix Refer to page 119 for details. 6.20.2.4 UPC E Settings Enabled Set this parameter to on to enable “UPC E”.
Chapter 6: Settings EAN 13 Settings 6.20.2.6 EAN 13 Settings Enabled Set this parameter to on to enable “EAN 13”. Prefix/Suffix Refer to page 119 for details. 6.20.2.7 UPC/EAN Shared Settings The setting assigned to the “Addendum” parameter associated with this option is shared across all UPC and EAN bar codes. Addendum An addendum is a separate bar code, supplementary to the main bar code. This parameter provides three options: Disabled, Optional and Required.
Chapter 6: Settings Code 11 Field Size/Char Refer to page 117 for details. 6.20.2.10 Code 11 Enabled Set this parameter to on to enable “Code 11”. Field Size/Char Refer to page 117 for details. 6.20.2.11 Codabar Enabled Set this parameter to on to enable “Codabar”. Field Size/Char Refer to page 117 for details. 6.20.2.12 Code 93 Enabled Set this parameter to on to enable “Code 93”. Field Size/Char Refer to page 117 for details. 6.20.2.
Chapter 6: Settings Imager 6.20.3 Imager Figure 6.47 Imager • Tap on the Scanner drop-down menu, and choose Imager. 6.20.3.1 Options – Imager TekImager Enabled Setting this option to on enables the imager installed in your hand-held. Dot Time (msec) The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner switches to a normal scan sweep.
Chapter 6: Settings Code 39 Settings Auto Exposure Important: This parameter value should only be changed by qualified Psion Teklogix personnel. It should be left at the default value – ‘on’. Setting this parameter to on allows the imager to make automatic gain, integration and illumination adjustments based on ambient light before capturing the bar code. If the adjustment is insufficient, further adjustments are made automatically before another image is captured.
Chapter 6: Settings Code 128 Settings 6.20.3.3 Code 128 Settings Enabled Set this parameter to on to enable “Code 128”. Field Size/Char Refer to page 117 for details. 6.20.3.4 UPC/EAN This parameter allows you to enable the following UPC (Universal Product Code) and EAN (European Article Numbering) bar codes: UPC-A, UPC-E, UPC-E1, UPC-8, EAN-13, Bookland EAN-13 and Bookland EAN. Enabled Set this parameter to on to enable “UPC/EAN” bar codes. Addendum Refer to “Addendum” on page 130.
Chapter 6: Settings Interleaved 2 of 5 6.20.3.7 Interleaved 2 of 5 Enabled Set this parameter to on to enable “Interleaved 2 of 5”. Field Size/Char Refer to page 117 for details. 6.20.3.8 Postal: Australian Enabled Set this parameter to on to enable “Postal: Australian”. Field Size/Char Refer to page 117 for details. 6.20.3.9 Postal: Japanese Enabled Set this parameter to on to enable “Postal: Japanese”. Field Size/Char Refer to page 117 for details. 6.20.3.
Chapter 6: Settings Postal: PostNET Field Size/Char Refer to page 117 for details. 6.20.3.12 Postal: PostNET Enabled Set this parameter to on to enable “Postal: PostNET”. Field Size/Char Refer to page 117 for details. 6.20.3.13 Postal: Royal Enabled Set this parameter to on to enable “Postal: Royal”. Field Size/Char Refer to page 117 for details. 6.20.3.14 2D DataMatrix Enabled Set this parameter to on to enable “2D DataMatrix”. Field Size/Char Refer to page 117 for details. 6.20.3.
Chapter 6: Settings 2D PDF-417 6.20.3.16 2D PDF-417 Enabled Set this parameter to on to enable “2D PDF-417”. Field Size/Char Refer to page 117 for details. 6.20.3.17 2D Micro PDF-417 Enabled Set this parameter to on to enable “2D Micro PDF-417”. Field Size/Char Refer to page 117 for details. 6.20.3.18 2D QR Code Enabled Set this parameter to on to enable “2D QR Code”. Field Size/Char Refer to page 117 for details. 6.20.3.19 2D RSS Code Enabled Set this parameter to on to enable “2D RSS Code”.
Chapter 6: Settings Composite Field Size/Char Refer to page 117 for details. 6.20.3.21 Composite A composite symbol includes multi-row 2D components making it compatible with linear and area CCD scanners along with linear and rastering laser scanners. Important: To successfully read this type of bar code, the two types of symbologies included in the composite must be enabled. In addition, “Center Bar Code Only” must be disabled. 6.20.
Chapter 6: Settings Options Tab A double-click produces different results depending on whether or not a value is assigned in the “Click Data” parameter. When a value is not assigned for the “Click Data”, double-clicking the scanner trigger overrides the target dot delay set in the “Dot Time” parameter and initiates a normal scan sweep. If a value is assigned for the “Click Data” parameter, double-clicking the scanner trigger inserts the “Click Data” value rather than initiating a scan.
Chapter 6: Settings Translations Tab Scan Log File If this parameter is enabled, the input barcode and the modified/translated output bar code are logged in the file \Flash Disk\ScanLog.txt. Keep in mind that if the “Scan Log File” is enabled, there is a slight performance effect when performing multiple scans since the log file is written to persistent storage. 6.20.5 Translations Tab Figure 6.49 Translation Tab • In the Translation tab, choose the Add button. Figure 6.
Chapter 6: Settings Wireless WAN Input This value is compared with the decoded bar code reading. If there is a match, the “Output” string is translated into the decoded bar code. Output If there is a match between the decoded bar code and the corresponding “Input” string, the decoded bar code will be translated into the “Output” string. This string entry parameter can be null, or it may contain any combination of standard and special characters (e.g., function keys, , etc.).
Chapter 6: Settings Taskbar Icons GSM/GPRS Status Indicators Signal strength is between 1% and 20%. Signal strength is between 21% and 40%. Signal strength is between 41% and 60%. Signal strength is between 61% and 80%. Signal strength is between 81% and 100%. A GPRS packet data connection is active. CDMA/1xRTT Signal strength is between 1% and 20%. Signal strength is between 21% and 40%. Signal strength is between 41% and 60%. Signal strength is between 61% and 80%.
Chapter 6: Settings Establishing A Connection 6.21.2 Establishing A Connection To display the main Wireless WAN dialog box: • Tap on Start, Settings. Tap on the System tab followed by the Wireless WAN icon. Figure 6.51 Wireless WAN Screen Note: If you are prompted to enter a PIN, refer to “Entering A PIN Number” on page 144 for details. The Status field indicates when the unit is ready to connect–the Connect Data button is enabled. • Tap on the Connect Data button.
Chapter 6: Settings Disconnecting From A Network 6.21.3 Disconnecting From A Network To disconnect from the network: • Tap on the Disconnect button, and then on OK. When the WORKABOUT PRO network connection is severed, the Status field displays Ready to Connect. A unit equipped with a GSM/GPRS expansion board displays the signal strength in the main Wireless WAN screen, even while a connection is active.
Chapter 6: Settings Error States Note: If you exceed the number of allowable attempts, a PUK entry window is brought to the foreground. You’ll need to enter a new PIN number. Once the correct PIN or PUK is entered or if none was required, the modem is instructed to perform a GSM network registration followed by a GPRS attach. The main Wireless WAN dialog box reflects the progress of the initialization.
Chapter 6: Settings Tools Menu The remaining error states are permanent: • SIM is missing The SIM card is missing. After the SIM has been inserted a warm boot may be required. • SIM failure The SIM card is permanently disabled (e.g. because the wrong PUK has been entered too many times). A new SIM is needed. • Modem failure The modem did not respond to commands as expected. If a warm boot does not clear this condition, the modem may need to be replaced.
Chapter 6: Settings Data Connection Configuration If the Enable automatic connect: checkbox is checked (unchecked by default), the Wireless WAN user interface will attempt to establish a GPRS connection whenever GPRS is available (e.g. after resume from suspend without further user interaction). To activate the automatic connection mode: • Tap on the OK button. While automatic connection mode is enabled, the Connect Data button in the main Wireless LAN dialog box changes to Disable Auto.
Chapter 6: Settings Data Connection Configuration In the following section, all the parameters that need to be configured for a connection (such as APN, user name, password, DNS server addresses etc.) are referred to as a profile. Every profile is identified by an arbitrary, unique name. The profile named Default is special in that it is always present and can neither be edited nor deleted. (A sample dialog box is presented in Figure 6.53 on page 146.
Chapter 6: Settings Data Connection Configuration New Tapping on the New button allows you to create a new profile. Figure 6.54 Creating A New Profile The name of the newly created profile must be different from all existing profiles. Also, the name cannot be Default. When the New Data Profile dialog box is opened, a proposal for a unique name is filled in the corresponding entry field.
Chapter 6: Settings Security Configuration Advanced IP Figure 6.55 Assigning IP Information The Advanced IP button in the Show Profile and Edit Profile dialog boxes opens another dialog box that allows you to configure a static IP address as well as the IP addresses for the primary and secondary DNS server. 6.21.5.2 Security Configuration The Security Configuration dialog box is called up through the Tools menu. Note: Security configuration is not available with CDMA modems.
Chapter 6: Settings Network Configuration removal). The stored PIN is also automatically entered in the Current PIN text box whenever the Security Configuration dialog box is called up. If unauthorized access to the device is a concern, the Require PIN on resume checkbox should be checked. In this case, you will be prompted whenever a PIN is required and the PIN is not stored. 6.21.5.3 Network Configuration Note: Network configuration is not available with CDMA modems.
Chapter 6: Settings Driver Mode Configuration 6.21.5.4 Driver Mode Configuration Figure 6.56 Driver Mode By default, the Wireless WAN driver is enabled (the Enable driver: checkbox is checked). The driver must be disabled in order to use the modem for anything other than GPRS (e.g. dial-up data, fax, or in order to manually submit AT commands to the modem for development, testing, approvals, etc.).
Chapter 6: Settings Modem Information 6.21.5.5 Modem Information The fields in this dialog box cannot be edited – they only display information about the WORKABOUT PRO modem. If the network operator has not programmed a user’s phone number into his SIM, the Phone: field remains empty. If the main menu shows an error status, at least partial modem information may be available.
Chapter 6: Settings Total Recall Enabled - Automatic Off When the hand-held enters suspend mode, the modem remains powered up. If the WORKABOUT PRO is not turned on again during the next 60 minutes, the unit briefly wakes up from unit mode, shuts down the modem, and enters unit mode again. This is the default mode. Enabled - Always On When the WORKABOUT PRO enters suspend mode, the modem remains powered indefinitely.
Chapter 6: Settings Creating A Backup Profile 6.22.1 Creating A Backup Profile • Tap on the Next button to begin the process. Figure 6.58 Profile Details Profile Information This dialog box lists the possible storage destinations for the profile file. • To begin, type a name for the profile in the field labelled Profile Name. This dialog box also lists the image type–OS Version and Registry Type for the WORKABOUT PRO. • • Tap on the icon to expand your settings for Profile Type and Profile Location.
Chapter 6: Settings Creating A Backup Profile Add Files Figure 6.59 Adding Files By default, All Files is selected so that all installed or copied files, database entries, and the Registry will be saved. You can, however, limit the backup to database, and/or the registry only. • Tap on the Next button to view your selections. View Selections Depending on what you have selected for inclusion in your profile, you can view a list of the selected files, databases, and/or registry. Figure 6.
Chapter 6: Settings Restoring A Profile Performing The Backup Figure 6.61 Performing The Backup • Tap on the Backup button to start the process and create a profile. A message is displayed in the Total Recall screen stating that the backup was completed successfully. • Tap on Finish to exit Total Recall. 6.22.2 Restoring A Profile Figure 6.
Chapter 6: Settings Connections Note: You can also manually restore an auto restore profile located in flash or a storage device. 6.23 Connections Note: ‘Beam’ is not available with the WORKABOUT PRO. This unit is not equipped with an IrDA port. You can set up Internet and corporate network connections so that you can browse the Internet, send and receive e-mail and synchronize information using ActiveSync. Your WORKABOUT PRO has two groups of connection settings: My ISP and My Work Network.
Chapter 6: Settings Modem Connection Setup 4. Under My ISP, tap on Add a new modem connection. 5. In the Select a modem drop-down menu, choose a modem connection. If you haven’t already created a modem connection, refer to “Modem Connection Setup” below. 6. To connect to the Internet, launch the program you want to use. For example, launch Internet Explorer on your WORKABOUT PRO to browse the Internet. Your hand-held automatically connects.
Chapter 6: Settings Modem Connection Setup Note: If your modem is not listed in the drop-down menu, choose Hayes Compatible on COM1. 5. Tap on the Next button. Figure 6.65 Phone Connection Screen 6. In the next screen, enter the phone number exactly as you want it dialed. If, for example, you need to dial 9 for an outside line, enter the 9 at the beginning of the phone number. 7. Tap on the Next button. Figure 6.66 User Name, Password and Domain 8.
Chapter 6: Settings Advanced Modem Settings Note: Generally, you will not need to change any of the Advanced settings. For information about the Advanced settings, refer to“Advanced Modem Settings” on page 161. Changes to Advanced settings are only required in the following instances: To change the baud rate settings, dialing string commands or credit card options. To change port settings. To enter TCP/IP settings because the server to which you are connecting does not dynamically assign addresses. 9.
Chapter 6: Settings Advanced Modem Settings Wait For Credit Card • If you’re paying for calls with a credit card, enter the number of seconds you want the WORKABOUT PRO to wait for a credit card prompt. Extra Dial-String Modem Commands • Type your credit card number in this field. Cancel If Not Connected In • Tap in the checkbox next to this option to enable this option to make certain that the WORKABOUT PRO does not stay on line too long while waiting to connect with a network.
Chapter 6: Settings Advanced Modem Settings Parity This parameter determines the type of parity checking used on the data going through the port. The options are: none, odd, even, mark and space. Stop Bits This parameter specifies the number of stop bits–1, 1.5, 2–used for asynchronous communication. Flow Control This parameter selects the type of flow control used in your hand-held computer. The WORKABOUT PRO can perform Software or Hardware handshaking, or you can choose None.
Chapter 6: Settings Setting Up A Network Card Server Settings Figure 6.70 Servers Tab Important: If your server assigns IP addresses dynamically, you will not need to change these settings. Servers requiring assigned IP addresses may also need a way to map computer names to IP addresses. The WORKABOUT PRO supports two name resolution options: DNS and WINS. Your ISP or network administrator can determine which name resolution you need, and can also provide the server address.
Chapter 6: Settings Changing Network Card Settings 3. If you need to specify server information, tap on the appropriate adaptor, and then tap on the Name Servers tab. Figure 6.71 Name Servers Screen Note: Because most networks use DHCP, you should not need to change these settings unless instructed to do so by your network administrator. 4. If necessary, use a network cable to connect the network card to your network. Refer to your the documentation shipped with your network card for details. 5.
Chapter 6: Settings VPN Connection Setup 6.24.2 VPN Connection Setup A VPN connection provides a secure connection to servers through the Internet. Before you begin, you need the following information from your network administrator: password, domain name, TCP/IP settings and a host name or IP address of the VPN server. 1. Tap on Start, Settings. Tap on the Connections tab followed by the Connections icon. 2. Under My Work Network, tap on Add a new VPN server connection. 3.
Chapter 6: Settings Managing An Existing Connection 6.24.3 Managing An Existing Connection Once you’ve defined a connection, a new option appears in the first Connections screen–Manage existing connections. 6.24.3.1 Editing A Connection • • Tap on Settings, Connections tab. Tap on the Connections icon. Tap on Manage existing connections. Figure 6.72 Modem Screen • • • Note: To edit your connection, tap on the Edit button.
Chapter 6: Settings Changing A Connection Setting Name 6.24.3.2 Changing A Connection Setting Name Your WORKABOUT PRO has two sets of connection settings: My ISP and My Work Network. If you want to change one or both of these options to something more familiar to you, follow the steps that follow. 1. Tap on Start, Settings. Tap on the Connections tab followed by the Connections icon. 2. Under My Work Network or My ISP, tap on Manage existing connections. 3. Tap on the General tab. Figure 6.
Chapter 6: Settings Selecting A Network 6.24.4 Selecting A Network Important: Normally, you will not need to change these settings. Contact your ISP or network administrator before making any changes. Private networks are used for work-related activities. Internet networks are used for home connection to your ISP. The My Work Network settings are used for private network connections (corporate networks), while My ISP settings are used for Internet network connections.
Chapter 6: Settings Ending A Connection 6.24.5 Ending A Connection • • • When connected through a modem or VPN connection, tap on the connec–in the menu bar, and then tap on Disconnect. tivity icon– When connected with a cable or cradle, detach the cable from your WORKBOUT PRO. When connected through a network (Ethernet) card, remove the card from the WORKABOUT PRO. 6.24.
Chapter 6: Settings Changing Advanced Proxy Server Settings 4. In the Proxy server field, type the proxy server name. 5. Tap on OK to save your changes. Note: If you need to change advanced settings such as a port number or proxy server type, you’ll need to tap on the Advanced button rather than tapping on OK. Advanced settings are described in “Changing Advanced Proxy Server Settings” on page 171 6.24.6.1 Changing Advanced Proxy Server Settings 1.
Chapter 6: Settings Bluetooth Setup 6.25 Bluetooth Setup Bluetooth is a short-range wireless technology (approximately 10 meters) that enables data communication between digital devices and is intended for Personal Area Networks (PAN). It also provides the capability to use a Bluetooth-enabled cellular phone as a data modem, exchanging information with other Bluetooth devices and providing network access. 6.25.1 Bluetooth Mode • Tap Start, Settings.
Chapter 6: Settings Scanning For A New Device 6.25.2 Scanning For A New Device Figure 6.78 Bluetooth Devices Tab • Tap on the Devices tab. To add a new device: • Tap on New.... The WORKABOUT PRO scans for a Bluetooth device within a 10 meter range. Any Bluetooth devices within range appear in the Bluetooth list box Figure 6.79 Adding A Device • Highlight the device you want to add. Tap on Next.
Chapter 6: Settings Scanning For A New Device Figure 6.80 Passkey (PIN) Screen • Type your passkey (PIN). Tap on Next. Figure 6.81 Display Name • • Note: In the Display Name screen, edit the name of the device. This is optional. Tap on Finish. To connect to a Bluetooth-equipped device that’s already been added, tap on the item in Bluetooth list box.
Chapter 6: Settings The Bluetooth GPRS Phone 6.25.3 The Bluetooth GPRS Phone Once you’ve completed the Bluetooth settings, you can go ahead and set up communication through your Bluetooth-equipped phone. 1. Before you begin, make certain that the Bluetooth phone is turned on, that the Bluetooth radios in your WORKABOUT PRO and phone are enabled (turned on), and that the hand-held and phone are within 10 metres of each other. Both should be discoverable. 2.
Chapter 6: Settings The Bluetooth GPRS Phone 10. Enter the same PIN on the phone. 11. If you wish, you can edit the name of the phone in the Name field. 12. Tap on the Finish button. 13. In the My Connections list, tap on the phone and then on the Next button. 14. Enter the dial-up phone number for this connection, and tap on the Next button. 15. In the User name, Password and Domain fields, enter the logon information for this connection, and tap on Finish.
7 PROGRAMS 7.1 Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.2 ActiveSync® . . . . . . . . . . . . . . . . . . . . . . . . 7.2.1 ActiveSync Options. . . . . . . . . . . . . . . . . . 7.2.2 Scheduling Synchronization . . . . . . . . . . . . . 7.2.3 Connecting To The Internet With ActiveSync . . . . 7.3 Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 7.4 Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.5 Contacts . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 7: Programs 7.8.10 Deleting A Message . . . . . . . . . . . . . . 7.8.11 Storage Options . . . . . . . . . . . . . . . . 7.9 MSN Messenger . . . . . . . . . . . . . . . . . . . . 7.9.1 Setting Up Your MSN Account . . . . . . . . . 7.9.2 Getting Started . . . . . . . . . . . . . . . . . 7.9.3 Signing In To MSN Messenger . . . . . . . . . 7.9.4 Signing Out . . . . . . . . . . . . . . . . . . . 7.9.5 Adding Contacts. . . . . . . . . . . . . . . . . 7.9.6 Deleting Contacts . . . . . . . . . . . . . . .
Chapter 7: Programs 7.13 Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.14 Terminal Services Client. . . . . . . . . . . . . . . . . . . 7.14.1 Connecting To A Terminal Server. . . . . . . . . . . 7.14.2 Moving Around Terminal Services Client . . . . . . 7.14.3 Improving Display Performance . . . . . . . . . . . 7.14.4 Improving Browser Performance . . . . . . . . . . . 7.14.5 Disconnecting Without Ending A Session . . . . . . 7.14.6 Ending A Session . . . . . . . . . . . . . . . . . . .
Chapter 7: Programs Games The Programs menu provides access to all the applications available on your WORKABOUT PRO. • Tap on Start, Programs to display this screen. Tapping on an icon in this screen launches the associated program. Figure 7.1 Programs Tabs 7.1 Games Your WORKABOUT PRO is equipped with a few standard games–Jawbreaker and Solitaire–should you feel the need to pass the time. 7.
Chapter 7: Programs ActiveSync Options 7.2.1 ActiveSync Options 1. In the ActiveSync program on your PC, tap on Tools, Options to display the Sync Options tab. The Sync Options tab is selected by default. Figure 7.2 Sync Options Tab 2. Tap in the checkboxes to add a checkmark next to the types of information you want ActiveSync to synchronize. 3.
Chapter 7: Programs Scheduling Synchronization 7.2.2 Scheduling Synchronization To choose when your data will be synchronized: 1. Tap on the Schedule tab in the Options dialog box. Figure 7.3 Schedule Tab 2. Choose when you want ActiveSync to synchronize by tapping on the drop-down menu next to When connected to my PC, sync. You can choose Continuously, On Connection or Manually. 3. To synchronize with a server, choose how often by tapping on the drop-down menu in the Server Schedule area. 4.
Chapter 7: Programs Connecting To The Internet With ActiveSync To enable Pass Through in ActiveSync: • In ActiveSync on your PC, tap on the Options icon to display the Options screen. Tap on the Rules tab. Figure 7.4 ActiveSync Rules Tab • In the Pass Through section at the bottom of the screen, make certain that the Connection drop-down menu is set to The Internet. To connect to the Internet with ActiveSync: • • • Connect your PC to the Internet. Connect your WORKABOUT PRO to your PC.
Chapter 7: Programs Calculator . Figure 7.5 ActiveSync Connected Your WORKABOUT PRO is now connected to the Internet. 7.3 Calculator Tapping on Start, Programs, Calculator displays a standard calculator with regular functions. • Use your stylus to tap the calculator buttons. 7.4 Calendar This option is used to map out all your upcoming appointments, meetings and so on in the weeks, months and even years ahead.
Chapter 7: Programs Adding Contacts Contacts make it easy to e-mail anyone in your list. You’re not limited to e-mail addresses–you can also create lists of friends’ home addresses and phone numbers, and so on. • Tap on Start, Programs, Contacts, or If Contacts is listed in your Start menu, tap on Start, Contacts. Figure 7.6 Contacts Screen 7.5.1 Adding Contacts • Tap on New to display a New Contact screen. Figure 7.
Chapter 7: Programs Importing Contacts From Other Programs 7.5.2 Importing Contacts From Other Programs • • • • In Outlook on your PC, tap File, Import and Export... to display the Import and Export Wizard. Tap on Import from another program or file, and tap on Next. Tap the type of file you want to import, and tap on Next. Continue making the selections and tapping Next until you are finished, and then tap Finish. Your contacts are imported into Outlook and are ready to use. 7.5.
Chapter 7: Programs Assigning Contacts To Categories 7.5.4 Assigning Contacts To Categories In the Contacts screen: • • • • • Tap the contact you want to assign to a category. The Summary screen for the contact is displayed. Tap on the Edit menu to display the Contacts editing screen. Use the scroll bar to move down to the Categories field. By default, contacts are assigned to No Categories. Tap the Categories field to display the current category options.
Chapter 7: Programs File Explorer 7.6 File Explorer Windows Mobile 2003 SE files are stored in folders and sub-folders that are accessible through File Explorer. You can open, save, rename, copy and paste files in the same manner as you would on any desktop PC. Important: Refer to “Managing Files And Folders” on page 57 for details about this program. 7.7 Find • Tap Start, Programs, and then tap on the Find icon. Figure 7.
Chapter 7: Programs Help 7.7.1 Help • Tap on Start, Programs, and then tap on the Help icon. Figure 7.11 Help Screen • Tap on the item in the Help list for which you require information. 7.7.2 Internet Explorer You can connect to Internet Explorer in two ways: by connecting the WORKABOUT PRO directly to the Internet or by connecting through your PC while the hand-held is attached via ActiveSync (see “ActiveSync®” on page 181). 7.7.
Chapter 7: Programs The View Menu 7.7.4 The View Menu Turning Images On And Off • • Tap on Start, Program, Internet Explorer, and tap on the View menu. Tap on Show Images to add or remove the check mark. Figure 7.12 The View Menu Fitting The Page To The Screen You are provided with three layout options–One Column, Default and Desktop. To choose a layout: • In the Pocket Internet screen, tap on View, Layout and then choose an option. Figure 7.
Chapter 7: Programs Changing Security Options One column–puts almost all Web page content into one column that is as wide as the screen. You will not need to scroll horizontally. Default–maintains a layout similar to that you’d see on your desktop computer. Most of the content is arranged so that you can see most of it without needing to scroll horizontally. Desktop–maintains the same layout and size as that on your PC. You’ll need to scroll both horizontally and vertically. 7.7.
Chapter 7: Programs Changing Options To change your security settings: • Tap on Tools, Options, Security tab. Figure 7.15 Internet Explorer Security Tab Cookies collect information about your identity and preferences so that a page can tailor information to your needs. The page sends the file, and it is stored on your WORKABOUT PRO. To stop the Pocket Internet Explorer from collecting cookies: • Tap in the checkbox to the left of Allow cookies to disable this option.
Chapter 7: Programs Organizing Favorite Web Sites To free storage: • • Tap on Delete Files. All pages stored on your WORKABOUT PRO–including offline favorites content–are deleted. Tap on Clear History to delete all cached links. Setting A Home Page And Changing Character Sets To change your default Home page to the page you are currently viewing: • Tap on the General tab. Figure 7.17 Internet Explorer General Tab • Tap on Use Current.
Chapter 7: Programs Organizing Favorite Web Sites • Tap on the Mobile Favorites icon at the base of the Explorer screen– . Figure 7.18 Favorites Screen This screen shows your current favorite web sites. The WORKABOUT PRO lists a few sites already in the list by default. • Tap on a favorite to open the website. Adding Mobile Favorites • In Internet Explorer, open the web page you want to add to your favorites. • Tap on the Mobile Favorites icon– • Tap on the Add/Delete tab.
Chapter 7: Programs Synchronizing A Favorite Link • Tap on Add... to display the Add Favorites screen. The fields are automatically completed with data from the web page that is currently loaded in the WORKABOUT PRO Internet Explorer. Figure 7.20 Add Favorites Screen • Note: Tap on Add to add this web site to your Mobile Favorites. To delete a web site from your list, in the Add/Delete tab (Figure 7.34 on page 208), highlight the site you want to remove. Tap on . 7.7.
Chapter 7: Programs Messaging–The Inbox • • In the Create in list, tap on the Mobile Favorites folder to select it. If you want to be able to view the site on your WORKABOUT PRO when it is not connected, tap in the checkbox next to Make available offline to enable it. Note: Making a site available offline allows you to read the web page at any time on your hand-held without being connected to anything. Keep in mind that all parts of the web page are added, including images.
Chapter 7: Programs Synchronizing E-mail With Outlook For IMAP4 accounts, the folders you create and the messages you move are reflected on the server, making messages available any time whether you connect to your mail server from your WORKABOUT PRO or your PC. 7.8.2 Synchronizing E-mail With Outlook By synchronizing the WORKABOUT PRO Messaging program with Outlook on your PC, your e-mail is available on both the hand-held and on your PC.
Chapter 7: Programs Changing Synchronization Settings 7.8.3 Changing Synchronization Settings • In ActiveSync on your PC, double-tap the Inbox item in the Sync Options tab. Figure 7.23 Mail Synchronization PC Screen • • • • • Add a checkmark next to the folders in this screen that you want to synchronize with your WORKABOUT PRO. To control the number of lines copied to the WORKABOUT PRO, put a check mark next to To save space, copy at most and specify the maximum number of lines of text.
Chapter 7: Programs Mail Server Accounts–Creating, Editing & Deleting 7.8.4 Mail Server Accounts–Creating, Editing & Deleting Creating An Account • In the Messaging screen taskbar, tap on the Accounts tab. Figure 7.24 Messaging Account Screen • • In the Messaging Options screen, tap on New..., and complete the fields in the screens that are displayed. Figure 7.25 E-mail Address Screen Type your e-mail address–for example, username@servername.com.
Chapter 7: Programs Mail Server Accounts–Creating, Editing & Deleting • Tap on Next. Figure 7.26 E-mail Auto Configuration Screen Auto configuration attempts to connect to your e-mail server and download necessary settings so that you do not need to enter them manually. If Auto Configuration is successful, you may begin downloading messages from the server. If Auto configuration is not successful, you’ll need to continue with the New Account wizard screens. You’ll need the following information.
Chapter 7: Programs Mail Server Accounts–Creating, Editing & Deleting • Type your name and password in the fields provided. Tap Next. Figure 7.28 Account Information Screen • • • In the Account type drop-down menu, choose the appropriate protocol. POP3 is the most common protocol. In the Name field, type a unique name for this account such as Work or Home. Keep in mind that this cannot be changed at a later date. Tap Next. Figure 7.
Chapter 7: Programs Downloading Messages From A Remote Server • • If you are using a network connection, type your domain name in the Domain field. Tap Finish when you’ve completed all fields. Editing An Account • • In the Messaging screen taskbar, tap on the Accounts menu. Choose the Accounts command. In the Accounts screen, tap on the account you want to edit. Complete the fields in the screens that are displayed. Deleting An Account • • In the Messaging screen taskbar, tap on the Accounts menu.
Chapter 7: Programs Replying And Forwarding Messages 7.8.6 Replying And Forwarding Messages • Open the message in the Inbox. When you open a message in the Inbox, the tools used to work with the messages are displayed in the taskbar along the bottom of the screen. Tap on this icon to reply to the message. Figure 7.30 Replying To A Message • • • • Tap on this icon in the taskbar to display a pop-up menu. Choose the appropriate command–Forward, Reply All, or Reply.
Chapter 7: Programs Receiving Attachments 7.8.7 Receiving Attachments An e-mail attachment or one downloaded from a server appears as an icon at the bottom of the message. Attachments window Figure 7.31 Attachments When you tap on the attachment icon, it opens provided it has been fully downloaded. Note: If you are using an IMAP4 account, you can mark an attachment to be downloaded the next time you connect. If you receive messages through synchronization: 1. 2. 3. 4. Launch ActiveSync on your PC.
Chapter 7: Programs Creating And Sending A Message 7.8.8 Creating And Sending A Message 1. In the inbox message list, tap on the Accounts menu, and choose Outlook E-mail or the e-mail account you prefer. 2. In the taskbar at the bottom of the screen, tap on New. Figure 7.32 Creating A Message 3. In the To field, type the e-mail address of the recipient(s) to which you are sending the message, separating each with a semi-colon. 4. To access addresses from your Contacts list, tap the stylus on the To field.
Chapter 7: Programs Storage Options If you want to select more than one message: • • Tap and drag the stylus across the messages you want to delete. Tap and hold the stylus on the selected messages. In the pop-up menu, choose Delete. Messages are moved into the Deleted Items folder. 7.8.11 Storage Options To save memory, you can specify where you want attachments stored and when items will be permanently deleted from the WORKABOUT PRO.
Chapter 7: Programs MSN Messenger 7.9 MSN Messenger MSN Messenger allows you to chat with friends and coworkers who use MSN Messenger or Windows Messenger. 7.9.1 Setting Up Your MSN Account To use MSN Messenger, you’ll need an Internet connection and a .NET Passport account to log into MSN’s messaging servers. Note: MSN and Hotmail e-mail addresses are valid Passports accounts. 1. Set up a connection on your mobile device such as a modem or wireless connection.
Chapter 7: Programs Signing In To MSN Messenger 2. Tap on the Tools menu, and choose Options. Tap on the Accounts tab. Figure 7.35 MSN Messenger Accounts Tab 3. Enable (add a checkmark) to Enable MSN Messenger Service and/or Enable Exchange Instant Messaging. 4. If you enabled both accounts, tap on the Settings button and choose which account to sign in to first. 5. Tap on OK. 7.9.3 Signing In To MSN Messenger 1. Tap on Start, Programs, MSN Messenger icon. Tap anywhere in the MSN Messenger startup screen.
Chapter 7: Programs Signing Out 2. In the field below Sign in name, type your MSN .NET (or Hotmail) e-mail account. 3. In the Password field, type your MSN.NET Passport password, and tap Sign in. 7.9.4 Signing Out • Tap on the Tools menu. Choose Sign Out. 7.9.5 Adding Contacts The people you plan to chat with are known as your contacts in MSN Messenger. Important: These contacts are not to be confused with those identified in Contacts program described beginning on page 185.
Chapter 7: Programs Deleting Contacts 4. Tap on Next. You’ll see a “Success!” message. A failure message is displayed if you mistyped the e-mail address or if your contact doesn’t have a valid Passport account. 5. Tap OK. Your contact is listed on the main MSN Messenger screen whenever you sign in to the service. 7.9.6 Deleting Contacts 1. After signing in, in the main MSN Messenger screen, press and hold the tip of the stylus on the contact’s name. 2. In the pop-up menu, choose Delete Contact. 3.
Chapter 7: Programs Notes When someone adds you to their contact list, a dialog box appears on your WORKABOUT PRO that allows you to block them immediately should you choose. Changing Your Status To change your status: 1. Tap on Tools, My Status. Figure 7.38 My Status Menu 2. When you’re signed in but unable (or unwilling) to reply to messages, choose a status such as Away or Busy. 3. Choose Appear Offline if you want to see your contacts even though it will appear to them that you’re not signed in. 7.
Chapter 7: Programs Creating A Note Figure 7.39 Notes Screen 7.10.1 Creating A Note 1. Choose an entry mode for your note. To enter text with the soft keyboard, Transcriber or the Block or Letter Recognizer, tap the stylus on the soft keyboard icon to choose your text input method. To use your stylus to handwrite on the screen, tap on the pen icon . Lines will be displayed on the Notes screen as guides. Important: Refer to “Entering Text” on page 63 for details about these options. 2.
Chapter 7: Programs Converting Notes To Text Figure 7.40 Handwriting A Note 2. Tap on Tools, Recognize. The text in the note is converted from handwritten to printed text. Figure 7.41 Converting Handwriting Into Print Note: To convert only a specific portion of your handwritten note into printed type, tap the stylus just before the first letter of the text, pause for a second, and then drag your stylus across the text you want to select. Then, tap on Tools, Recognize to convert only the highlighted text.
Chapter 7: Programs Renaming A Note Failed Conversions The Recognize tool sometimes gets the conversion wrong. If some words are not converted properly: 1. Press and hold the stylus on the incorrectly converted word. 2. In the pop-up menu, choose Alternative to display a list of possible alternatives to the incorrectly converted word. Your handwritten version is displayed along the top of the menu. Figure 7.42 Incorrect Conversions 3. Tap on the correct word in the list. 4.
Chapter 7: Programs Synchronizing A Note 2. Tap on the recording icon the bottom of the note. to display the Record/Playback toolbar at Volume Skip to end Skip to beginning Record Stop Play Progress Indicator 3. Figure 7.43 Recording Screen Tap on the Record button–a beep alerts you that your device is now ready to record. 4. Begin speaking into the microphone on the WORKABOUT PRO, or move the hand-held to within a few feet of the source of the sound you want to record. 5.
Chapter 7: Programs Pictures To synchronize Notes with Outlook: 1. Connect your WORKABOUT PRO to your PC. 2. In the ActiveSync screen on your PC, tap on the Options icon display the Options tab. to Figure 7.45 PC Sync Options Tab 3. Make certain that Notes is selected in this tab, and tap on OK. When you next synchronize your WORKABOUT PRO with ActiveSync, all your notes are copied to your PC. 7.11 Pictures Pictures is a photo viewing program.
Chapter 7: Programs Moving Photos To The WORKBOUT PRO 7.11.1 Moving Photos To The WORKBOUT PRO 1. Connect your device to your PC with ActiveSync. 2. On your PC, using Windows Explorer (right-click My Computer and click on Explorer), drag photos from their folder to the Mobile Device, My Pictures folder. 7.11.2 Opening A Photo 1. Tap on Start, Program, Pictures. You’ll see a thumbnail of your photos. Pocket PC icon Storage card icon Slide Show icon Figure 7.
Chapter 7: Programs Deleting A Photo 7.11.3 Deleting A Photo 1. Press and hold the stylus on the photo you want to delete to display a pop-up menu. Tap on Delete. 2. Confirm your choice when prompted. 7.11.4 Editing A Photo • Tap a thumbnail photo to open it. To display the editing tools: • Tap Edit, Brightness and Contrast. A new set of tools is displayed above the taskbar. Down Brightness Up Brightness Down Contrast Up Contrast Rotate Crop Magnify Figure 7.
Chapter 7: Programs Editing A Photo Cropping A Photo • • Tap on the Crop icon and then drag the stylus diagonally across the screen to select the area of the image you want to crop. Tap inside the box when prompted. Your photo is cropped. Zooming In And Out • Tap the Magnify icon–a smaller version of the photo is displayed on the screen. Tap to arrange best fit Tap to zoom in Tap to zoom out Figure 7.49 Zooming Photos • • • • Tap on the Zoom In icon to zoom in and the Zoom Out icon to zoom out.
Chapter 7: Programs Creating A Slide Show 7.11.5 Creating A Slide Show To view a slide show: • Tap on the Slide Show icon in the taskbar. The slide show begins–in slide show mode, photos are displayed for about five seconds, one after the other. To display the slide show tool bar: • Tap anywhere on the photo. Pause Play Flip View Previous Next Close Figure 7.50 Slide Show Bar Flip View Button–switches between landscape and portrait. Play Button–resumes playing the slide show if you’ve paused it.
Chapter 7: Programs Pocket Excel 7.11.6 Pocket Excel Pocket Excel is an abridged version of Microsoft Excel, an electronic spreadsheet program. In addition to providing the tools to manipulate text and numeric values like statistics, percentages, using formulas that perform calculations, and so on, this program can also include graphics such as pie charts. Pocket Excel allows you to copy Excel workbooks from your PC onto your WORKABOUT PRO and update them while you’re away from your desk.
Chapter 7: Programs Workbook Components 7.11.7 Workbook Components To better understand the components of a workbook, review the diagram below. Columns Address of selected text Entry bar Cell Rows Selected cell Status bar Toolbar Menu bar Formula drop-down menu Sheet1 drop-down menu Figure 7.52 Excel Components • If the toolbar is not visible, tap on the Show/Hide Toolbar icon Format Cells Align Left Align Centre Currency Style Align Right AutoSum .
Chapter 7: Programs Adding, Deleting And Renaming Worksheets 7.11.9 Adding, Deleting And Renaming Worksheets To add, remove or rename a worksheet from within a workbook: • Tap on Formats, Modify Sheets. Figure 7.54 Modify Sheets • • Tap on the sheet you want to modify in the left column. Tap Rename to assign a new name, Insert to add a new worksheet, Delete to remove the worksheet, and Move Up or Move Down to change the order of the worksheets. 7.11.
Chapter 7: Programs Entering Data In A Worksheet • Begin typing text or numbers. As you type, a blinking cursor is displayed in the entry bar at the top of the screen. This is where the data appears before it is placed in a cell. The data you type appears in the ‘entry bar’ before being placed in the ‘selected cell’. Entry bar Selected cell Figure 7.55 Entering Data • Tap the check mark to the left of the entry bar, or tap on on the soft keyboard to place the data into the cell.
Chapter 7: Programs Working With Cells, Rows and Columns Copying And Pasting • • • • Tap the cell that contains the data you want to copy. Tap on Edit, Copy from the menu in the taskbar, or Tap and hold the stylus in the cell you want to copy. In the pop-up menu, choose Copy. Tap in the cell where you want to paste the data. Tap on Edit, Paste, or Tap and hold the stylus in the cell where you want to paste the data. In the pop-up menu, choose Paste. 7.11.
Chapter 7: Programs Working With Cells, Rows and Columns Figure 7.57 Format Cells Number Tab Number Tab–Numbers can represent currency, a date, a percentage, and so on. The Category: drop-down menu allows you to choose what the number in a spreadsheet represents. For example, choose Currency for monetary units. Other categories have options attached to them.
Chapter 7: Programs Working With Cells, Rows and Columns Align Tab–The drop-down menus below the ‘Horizontal:’ and ‘Vertical:’ options allow you to arrange text in the cells. Tapping in the checkbox next to ‘Wrap text’ wraps lines of text to fit in a cell. Figure 7.59 Cell Alignment Tab Font–The options in this tab allow you to choose a font, the colour and size of the font, along with the style–Bold, Italic and Underline. Figure 7.
Chapter 7: Programs Working With Cells, Rows and Columns Borders–This tab determines the appearance of a cell–the colour of cell borders, on which side of the cell borders will be displayed and any cell shading. Figure 7.61 Borders Tab • When you’ve set your formatting options, tap on OK. The cell you selected reflects the formatting you specified. Inserting Rows And Columns To insert a cell, row or column: • • Tap a cell in the workbook next to which you want to insert a cell, row or column.
Chapter 7: Programs Working With Cells, Rows and Columns Figure 7.62 Insert Cells Screen • Tap in one of the radio buttons: Shift cells right–inserts the cell to the left of the selected cell, and shifts existing information to the right. Shift cells down–inserts a cell above the selected cell, and shifts the existing cells down. Entire row–inserts an entire row above the selected cell. Entire column–inserts an entire column to the left of the selected cell.
Chapter 7: Programs Creating Formulas Figure 7.63 Delete Cells Shift cells left–deletes the selected cell and shifts existing information to the left. Shift cells up–deletes the selected cell and shifts existing information up. Entire row–deletes an entire row and shifts existing information up. Entire column–deletes an entire column and shifts existing information to the left. 7.11.12 Creating Formulas A formula is an equation beginning with an = sign that performs operations on your data.
Chapter 7: Programs Creating Formulas Inserting Formulas Manually In this example, the total expense will appear in the selected cell, next to ‘Total’. Figure 7.64 Manually Entered Formulas • • Tap the stylus in the cell where you want the result of the formula to appear. Tap the stylus in the entry bar, and begin the formula by typing an equal sign ‘=’. Figure 7.65 Beginning A Formula In the example above, the objective is to add the expenses together, placing the total in the cell next to ‘Total’.
Chapter 7: Programs Creating Formulas • • • Since in this example, we want to add values together, tap the stylus on the plus sign ‘+’ in the soft keyboard–tap the key in the soft keyboard to display this symbol. Tap the stylus in cell B2–the cell containing the value, 200. Tap on the check mark icon to the left of the entry bar. The total of cells B1 and B2 are displayed in the cell that you selected at the outset. Figure 7.
Chapter 7: Programs Creating Formulas • Figure 7.67 Insert Function Screen Tap on the formula you want to use–for this example, the SUM formula was used–‘SUM(number1,number2,...)’, and tap on OK. Important: The formula is displayed in the entry bar of the worksheet. This formula is a model. The information in the parentheses must be replaced by your data. Figure 7.
Chapter 7: Programs Pocket Word • • • With the cursor positioned between the parentheses, tap the stylus on the first cell you want to include in this formula, and then type a comma. Tap the stylus on the next cell you want included in the formula, remembering to separate each entry with a comma. When you’re done, tap on the check mark to the left of the entry bar. The formula is calculated and the total is entered in the cell you selected at the outset. Figure 7.69 Completed Formula 7.
Chapter 7: Programs Creating A New Document 7.12.1 Creating A New Document • In Pocket Word, tap on New in the taskbar at the bottom of the screen, or In the Today screen, tap on the New menu, and choose Word Document from the menu. Figure 7.70 Pocket Word Document 7.12.2 Creating A New Document From A Template • In Pocket Word, tap on Tools, Options to display the Options screen. Figure 7.
Chapter 7: Programs Opening An Existing Document • • Once you’ve chosen a template, tap on OK. Tap the New menu in the bottom-left corner of the screen. The new document is displayed with the template format you chose–in this example, the Memo template. Figure 7.72 Template Word Document Note: Once you choose a template, each time you open a new document, it will be presented in the template you chose.
Chapter 7: Programs Saving Documents 7.12.4 Saving Documents • Within a document, tap Tools, File, Save Document As. Figure 7.74 Save Document As Screen You can use this screen to change the following: the document name, folder location, document type, storage location. • Note: Once you’ve made your selections, tap OK to save your document. A few points to keep in mind–If you choose None for the Folder: option, your document is filed in My Documents by default.
Chapter 7: Programs Data Entry Modes Your document remains on the screen, but all changes you’ve made since opening the document are reversed. 7.12.6 Data Entry Modes Pocket Word offers a variety of data entry modes: Keyboard, Writing and Recording. Typing Modes • • • Note: Open a Word document. If the soft keyboard is not displayed, tap on the keyboard icon lower-right corner of the taskbar. Use your stylus to tap on the soft keyboard keys.
Chapter 7: Programs Data Entry Modes Figure 7.75 Alternate Conversions • • Tap on the correct word in the list. If the word is not listed, tap on the soft keyboard icon soft keyboard, and type the correct word. to display the Recording Mode To record a voice annotation: • Tap on View, Recording. Volume Skip to end Skip to beginning Record Stop Play Progress Indicator Figure 7.
Chapter 7: Programs Formatting Text • To stop the recording, tap on the black square Stop button in the toolbar. To play a voice recording: • Tap your stylus on the speaker icon in the Pocket Word document. Figure 7.77 Speaker Icon 7.12.7 Formatting Text Using the Pocket Word Toolbar Formats Left Italics Align Centre Right Bullets Align Bold Underline Tap this icon to show or hide this toolbar. Figure 7.
Chapter 7: Programs Formatting Text To apply a formatting style to text in your document: • • Highlight text to which you want to apply a format. Tap the stylus on an icon in the toolbar to apply that format to the highlighted text. Cutting, Copying And Pasting • • • Highlight the text you want to copy by pressing the tip of the stylus just before the block of text and dragging it to the end of the text you want to Cut, Copy or Paste.
Chapter 7: Programs Formatting Text • • • Note: In the Indentation Left and/or Indentation Right fields, tap the up or down arrows to changed the indentation in increments of 0.25 centimeters. To adjust the indentation of only the first line or to create a hanging indent after the first line, tap the stylus in the drop-down menu next to Special and choose First Line or Hanging. In the By field, adjust the spacing in increments of 0.25 centimeters.
Chapter 7: Programs Formatting Text Replacing A Word • In a document, tap on Edit, Find/Replace to display the Find screen, and tap on the Replace button. Figure 7.81 Replace Screen • • In the Find What and Replace with fields, type the text you want to find and the text with which you want to replace it. Tap on Find. The first instance of the word is highlighted in your document and the Replace options are displayed in a toolbar near the bottom of the Word document. Figure 7.
Chapter 7: Programs Sharing Documents With Your PC 7.12.8 Sharing Documents With Your PC Documents created on a PC are recognized by your WORKABOUT PRO. However, some formatting is lost when ActiveSync converts a Word document to a Pocket Word document. This loss also occurs when you open a .doc file and change it on the WORKBOUT PRO. For example, suppose your .doc file has a table. Pocket Word cannot display tables–these are displayed as tabbed text.
Chapter 7: Programs Moving Around Terminal Services Client • Tap on Start, Programs, Terminal Services Client. Figure 7.83 Terminal Services Client Screen 1. If the Recent Servers list contains any servers to which you have recently connected, tap on the server. 2. To connect to a new server, type the server’s name in the Server field. 3.
Chapter 7: Programs Improving Browser Performance 7.14.4 Improving Browser Performance When you reduce the time taken to refresh a Web page, Internet Explorer performance is improved. 1. On your PC, in Internet Explorer, choose Tools, Internet Options, and tap on the Advanced tab. 2. Disable the check mark next to Use smooth scrolling. 7.14.5 Disconnecting Without Ending A Session Important: These commands are accessed from the Start menu in the Terminal Services screen used to access the PC’s commands.
Chapter 7: Programs Converting A Media File On Your PC 1. On your PC, launch Windows Movie Maker (Start, All Programs, Accessories, Entertainment). If you don’t have this program, go to: www.microsoft.com/windowsxp/moviemaker. Tap here to import video Tap here to import audio Figure 7.84 Windows Movie Maker 2. In the Movie Tasks area under Capture Video, tap on one of the following: Import Video to import a video file or Import audio or music to import an audio file.
Chapter 7: Programs Converting A Media File On Your PC Figure 7.85 Movie Maker Import File Screen 3. Navigate to the location in which the media file resides. 4. Double-tap on the file you want to convert. Figure 7.86 Collections Window A video file, like this example, displays one or more frames of the movie. An audio file is represented by an icon with a musical note in it. 5.
Chapter 7: Programs Converting A Media File On Your PC Drag video files (use the shift key to select all the frames) to the Video timeline. Drag the audio file icon to the Audio/Music timeline. Figure 7.87 Movie Maker Timeline An audio file is represented in the timeline by a wavy line. A video file can be split into clips or remain as a single frame. 6. In the Movie Tasks section, tap on the Finish Movie drop-down menu, and choose Save to my computer to start the Save Movie Wizard. Figure 7.
Chapter 7: Programs Copying Music Files From A CD 9. Tap on Next Figure 7.89 Movie Settings Screen 10. While the default playback quality settings are recommended, you can make changes in this screen by tapping on Show more choices. 11. Tap on Next. The Saving Movie dialog box indicates the progress of the file conversion. 12. Tap on Finish. Audio files are saved with a .wma extension, and video files are saved with a .wmv extension.
Chapter 7: Programs Copying Music Files From A CD 4. Tap on the Rip tab at the top of the Windows Media screen. Figure 7.90 Windows Media Rip Screen The Rip (copy) tab lists all the track titles on the CD you inserted in your PC. Note: If you don’t see your CD tracks listed, tap on the ‘Find Album Info’ button in the upper-right corner of this screen. By default, all songs are selected (marked with a checkmark) to be ripped if you have not previously ripped them. 5.
Chapter 7: Programs Copying Music And Video Files To Your Hand-Held Change my current format settings–Choose this option if you want to change format, bit rate, storage folder, or other options. Note: To tailor the format or audio quality settings at another time, in the Tools menu, choose Options, and then tap on the Rip Music tab. Once you’ve made your selection, tap on OK. 7. Tap on the ‘Rip Music’ button to rip (copy) your selections to your PC.
Chapter 7: Programs Auto Syncing Music 3. Tap on the Sync tab in the Windows Media screen on your PC. Figure 7.91 Windows Media Sync Tab 4. Tap on Sync settings. Figure 7.
Chapter 7: Programs Playing Music And Videos 5. In the Synchronization Settings screen, clear all play list checkboxes, and then tap on the files you want to synchronize–‘All Music’. Important: Make certain that ‘Synchronize device automatically’ is selected. 6. Tap on OK. Windows Media player checks the media files on the WORKABOUT PRO against the files in the Windows Media Library. Any files that are not music or picture files are deleted from the WORKABOUT PRO.
Chapter 7: Programs Playing Music And Videos 2. Tap on Menu, Library. Figure 7.94 Windows Media Library Screen 3. To update the library to include the media file(s) you copied to your WORKABOUT PRO from your PC, tap on Menu, Update Library. Figure 7.
Chapter 7: Programs Playing Music And Videos 4. Tap on Search to update the media library. Tap on Done once the update has been completed. Figure 7.96 Library Update Completion 5. In the updated Library screen, tap on the item in which your media file is stored–My Music, My Video, and so on. Tap on Play. Figure 7.97 Windows Media Library Screen The media file you choose plays in the Windows Media Player screen. If you’re playing music, the CD cover is displayed in the screen.
Chapter 7: Programs Windows Media Player Controls 7.15.6 Windows Media Player Controls The diagram below describes the function of each of the control buttons on the Windows Media Player screen. Opens Internet Explorer & displays the Windowsmedia.com Web site Skip to next file Play Skip to start of current file or to previous file Displays video at full screen Turns volume on & off Increase volume Decrease volume Figure 7.
EXPANSION MODULES 8 8.1 Expansion Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261 8.1.1 Removing The End-Cap And Back Plate . . . . . . . . . . . . . . . 261 8.1.2 What’s Inside. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 8.1.3 Shutting Off Power. . . . . . . . . . . . . . . . . . . . . . . . . . . 263 8.1.4 Installing The PC Card Expansion Module . . . . . . . . . . . . . . 263 8.1.5 Installing A GSM/GPRS Module . . . . . . . . . . . . . . . . . . . 265 8.1.
Chapter 8: Expansion Modules Expansion Modules 8.1 Expansion Modules Easily installed expansion modules available for the WORKABOUT PRO allow you to customise this hand-held to meet your specific mobile computing requirements. This chapter outlines how to install the following expansion modules: PCMCIA, GSM/GPRS, SE 1223HP and SE 923HP scanner. 8.1.1 Removing The End-Cap And Back Plate Warning: The installation of this PC Card Expansion Module must be performed using the appropriate anti-static devices.
Chapter 8: Expansion Modules What’s Inside 8.1.2 What’s Inside Expansion Connector Internal Battery Compact Flash (CF) Connector SW1401 Power Switch Main Logic Board Metal Frame Figure 8.
Chapter 8: Expansion Modules Shutting Off Power 8.1.3 Shutting Off Power Before installing a module or card in the WORKABOUT PRO, all power sources must be turned off. • • • Remove the battery. If your unit is using AC power, disconnect it. Remove the stylus from end-cap. Remove the end-cap, and slide the SW1401 switch to the left to shut off internal battery power. SW1401 Power Switch Figure 8.3 SW1401 Power Switch 8.1.
Chapter 8: Expansion Modules Installing The PC Card Expansion Module To insert a PCMCIA PC card in your WORKABOUT, you will need to install a PCMCIA module equipped with a 100-pin connector. This module snaps onto the expansion connector on your WORKABOUT PRO. Important: Backup any data in RAM first, since it will be erased when the unit is turned off. Mechanical Stopper PCMCIA Expansion Module Figure 8.4 PCMCIA Module And Mechanical Stopper • • • Remove the battery.
Chapter 8: Expansion Modules Installing A GSM/GPRS Module • Apply gentle downward pressure to securely seat the card in the connector. Insert the PCMCIA card as shown here, with the label facing you. Figure 8.5 Inserting A PCMCIA Card • • • Align the mechanical stop and use the four screws provided to secure in place. Tighten the screws to a torque of 2 lbs-in (2 kgf-cm), or until finger-tight. Slide the SW1401 switch to the right to turn power back on. Replace the end-cap.
Chapter 8: Expansion Modules Installing A GSM/GPRS Module • • Remove the stylus from the end-cap, and then remove the end-cap at the top of the WORKABOUT PRO. Slide the SW1401 switch to the left to shut off internal battery power. Important: In order for the WORKABOUT PRO to access the GSM network, ensure that you slide the SIM (Subscriber Identity Module) card into the GSM/GPRS module before installing that unit in the WORKABOUT PRO.
Chapter 8: Expansion Modules Installing A GSM/GPRS Module • Fit the antenna at the top of the unit making certain that the antenna contacts are aligned with the contacts on the GSM/GPRS module (see Figure 8.7). Ensure that the tab at the top of the antenna is inserted under the lip of the WORKABOUT PRO’s black plastic frame (Figure 8.8). Use the screws provided to secure the antenna on the metal frame. Tighten the screws to a torque of 2 lbs-in (2 kgf-cm, or until finger tight.
Chapter 8: Expansion Modules Installing An SE 1223HP Scanner 8.1.6 Installing An SE 1223HP Scanner Warning: Anti-static devices MUST BE USED during the installation of this scanner module. If unavailable, discharge static from your body by touching a grounded metallic object before opening any covers on the unit. The SE 1223HP scanner (model # WA9000) is the internal scanner module available with the WORKABOUT PRO. To install it: • • • • Remove the battery. If your unit is using AC power, disconnect it.
Chapter 8: Expansion Modules Enabling The SE 1223HP Scanner • • • Fit the scanner module over the back of the WORKABOUT PRO–it replaces the back plate of the unit. Fasten the module in place with the screws provided. Tighten the screws to a torque of 3 lbs-in (3kgf-cm). Slide the SW1401 power switch to the right to turn power back on, and replace the end-cap, backplate and battery. Tighten the end-cap screws to a torque of 3 lbs-in (3kgf-cm). Figure 8.10 Scanner Module Installed In WORKABOUT PRO 8.1.6.
Chapter 8: Expansion Modules Enabling The SE 923HP Scanner The SE 923HP scanner (model # WA9002) is the internal scanner module available with the WORKABOUT PRO. To install it: • • • • Remove the battery. If your unit is using AC power, disconnect it. Remove the stylus and then, remove the end-cap at the top of the WORKABOUT PRO. Slide the SW1401 switch to the left to shut off internal battery power. Remove the back plate from the unit. A scanner flex cable is already attached to the WORKABOUT PRO.
PERIPHERAL DEVICES & ACCESSORIES 9 9.1 Carrying Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273 9.1.1 Attaching The Hand Strap . . . . . . . . . . . . . . . . . . . . . . . 273 9.1.2 Attaching The Pistol Grip . . . . . . . . . . . . . . . . . . . . . . . 275 9.1.3 Protective Carrying Case. . . . . . . . . . . . . . . . . . . . . . . . 276 9.1.3.1 Using The Swivel Belt Loop With The Carrying Case . . . . . 277 9.1.4 Soft Shell Holster . . . . . . . . . . . . . . . . . . . . . . .
Chapter 9: Peripheral Devices & Accessories 9.5.3 Charge Indicators–The LED . . . . . . . . . . . . . . . . . . . . . . 289 9.6 Quad Battery Charger–Model #WA3004 . . . . . . . . . . . . . . . . . . . 290 9.6.1 Charging Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . 290 9.6.2 Battery Charge Duration . . . . . . . . . . . . . . . . . . . . . . . . 291 9.6.3 Charge Indicators–The LEDs. . . . . . . . . . . . . . . . . . . . . . 291 9.6.4 Troubleshooting . . . . . . . . . . . . . . . . . . . .
Chapter 9: Peripheral Devices & Accessories Carrying Accessories 9.1 Carrying Accessories There are a variety of carrying accessories to help the operator work safely and comfortably with the WORKABOUT PRO. Carrying Accessory Model Number Hand Strap WA6020 Pistol Grip WA6001 Protective Vinyl Case WA6090 Soft Shell Holster WA6050 Table 9.1 Carrying Accessories Important: Do not use adhesives such as Loctite to secure the screws on carrying accessories.
Chapter 9: Peripheral Devices & Accessories Attaching The Hand Strap • Use a Phillips screwdriver to attach the strap to the two threaded inserts on the back of the WORKABOUT PRO, near the top of the unit Figure 9.1 Securing The Hand Strap • Stretch the hand strap toward the base of the WORKABOUT PRO, and hook the bottom of the strap into the slot near the base of the battery pack. Figure 9.
Chapter 9: Peripheral Devices & Accessories Attaching The Pistol Grip 9.1.2 Attaching The Pistol Grip The pistol grip is attached to the four threaded inserts on the back of the WORKABOUT PRO. Four Phillips head screws are provided with this accessory. Figure 9.3 Pistol Grip Note: Prior to installation, make sure the trigger mechanism is securely snapped into the pistol grip body and that the trigger operates properly.
Chapter 9: Peripheral Devices & Accessories Protective Carrying Case • • Position the pistol grip so that it fits snugly over the back of the unit and the holes in the pistol grip are aligned with the threaded inserts on the back of the WORKABOUT PRO. Tighten the screws to a torque of 3 lbs-in (3kgf-cm) to secure the pistol grip in place. 9.1.3 Protective Carrying Case A carrying case is available for WORKABOUT PROs to shield the unit from damage.
Chapter 9: Peripheral Devices & Accessories Using The Swivel Belt Loop With The Carrying Case 9.1.3.1 Using The Swivel Belt Loop With The Carrying Case The WORKABOUT PRO carrying case is equipped with two rings onto which you can attach a swivel belt loop so that you can hang the unit from your belt. If you prefer, you can also attach a belt clip to this accessory so that you can clamp the unit onto your waistband or belt. (rather than slide your belt through the belt loop). Figure 9.
Chapter 9: Peripheral Devices & Accessories Using The Swivel Belt Loop With The Carrying Case Alternatively, you can attach a plastic clip to the swivel belt loop and clip it to your waistband or belt. Belt Clip Figure 9.
Chapter 9: Peripheral Devices & Accessories Soft Shell Holster 9.1.4 Soft Shell Holster A soft shell holster with removable belt and swivel holster pad can be used to hang a WORKABOUT PRO with a pistol grip from you waist Soft Shell Holster Swivel Holster Pad and Removable Belt Figure 9.8 Soft Shell Holster • • • Insert the belt in the swivel holster pad. Attach the pad on either the left or right side of the holster case, depending on whether you are left- or right-handed.
Chapter 9: Peripheral Devices & Accessories The Batteries 9.2 The Batteries Note: Review “Specifications” on page 305 for detailed information. The WORKABOUT PRO will operate with a Standard Lithium Ion battery pack, a High-Capacity Lithium Ion battery pack or three AA alkaline batteries. If you are using a Lithium Ion battery pack, it must first be charged. In addition to the main battery, the hand-held is equipped with a rechargable coin battery–a Maxell ML2032. 9.2.
Chapter 9: Peripheral Devices & Accessories Chargers And Docking Stations • • • • • • • • • • • • • • Do not immerse the battery in water. When charging, use the battery charger specifically designed for the battery. Do not pierce, strike, throw or step on the battery. Do not directly solder the battery. Do not connect the battery to an electrical outlet, vehicle cigarette lighter, etc. Do not put battery into a microwave oven or pressurized container.
Chapter 9: Peripheral Devices & Accessories Installation–Chargers And Docking Stations 9.3.1 Installation–Chargers And Docking Stations When installing a charger or docking station at your site, consider the following guidelines. • Keep chargers and docking stations away from excessive dirt, dust and contaminants. • Chargers will not charge batteries outside an ambient temperature range of 0° C to 45 °C (32° F to 113° F).
Chapter 9: Peripheral Devices & Accessories Important Charger Safety Instructions • To reduce risk of damage to the electric plug and cord when unplugging the charger, pull the plug rather than the cord. • Make sure the cord is positioned so that it is not stepped on, tripped over, or otherwise subjected to damage or stress. • Do not operate the charger with a damaged cord or plug. Replace immediately.
Chapter 9: Peripheral Devices & Accessories Desktop Docking Station 9.4 Desktop Docking Station There are two desktop docking stations available–your choice depends on which type of WORKABOUT PRO you are using. Desktop docking station model WA4002-1 is designed for use with the WORKABOUT PRO C. Model WA4102-1 is designed for use with the WORKABOUT PRO S. WORKABOUT PRO Charge Well Docking Station Connector Pins LED Legend Figure 9.
Chapter 9: Peripheral Devices & Accessories Charging A Battery Installed In The WORKABOUT PRO Important: This docking station can only be used to charge Psion Teklogix approved Lithium-Ion batteries–specifically model numbers WA3000 and WA3002. 9.4.1 Charging A Battery Installed In The WORKABOUT PRO • • Insert the DC power cable to the DC IN socket on the desktop docking station. Plug the pronged end of the cable into an AC outlet.
Chapter 9: Peripheral Devices & Accessories Troubleshooting The Charging Operation Of The Dock The desktop docking station is equipped with a single dual-coloured LED indicator in the lower-right corner of the front panel. LED Behaviour Icon Charge Status Off No battery detected in the slot. Solid Green Charge in progress. Fast Flashing Green Battery charged to less than 80% of capacity. Slow Flashing Green Battery charged to greater than 80% of capacity.
Chapter 9: Peripheral Devices & Accessories Linking A WORKABOUT PRO To A PC 9.4.7 Linking A WORKABOUT PRO To A PC The desktop docking station can be connected to a PC so that you can exchange files in the same way that you would between PC drives. A USB cable is included with your docking station. To link the WORKABOUT PRO to a PC: • Insert the hand-held in the desktop docking station. • Insert the USB cable into the docking station Client USB connector.
Chapter 9: Peripheral Devices & Accessories Linking A WORKABOUT PRO To An Ethernet Network 9.4.8 Linking A WORKABOUT PRO To An Ethernet Network An USB-Ethernet adaptor cable–model number WA4010–is used to connect the WORKABOUT PRO to an Ethernet network through a desktop docking station (model number 4002 or 4102). Ethernet Port USB Connector Figure 9.13 USB-Ethernet Adaptor Cable • • 9.4.8.1 Insert the adaptor’s USB connector into the Host USB port on the desktop docking station.
Chapter 9: Peripheral Devices & Accessories Single Battery Charger–Model #WA3001 9.5 Single Battery Charger–Model #WA3001 Figure 9.14 Single Battery Charger The single battery charger is designed to charge a single battery. It has a DC IN socket and is equipped with one LED that indicates the status of the charge process. 9.5.1 Inserting A Battery In The Single Battery Charger • • Insert the DC power plug into the charger. Plug the pronged end of the power cable into an AC outlet.
Chapter 9: Peripheral Devices & Accessories Quad Battery Charger–Model #WA3004 Slow flashing green Charge in progress. Solid red Battery is outside ambient temperature range of 0° C to 45 °C (32° F to 113° F). Flashing red Charge alarm indicating a charging circuit problem. Refer to “Troubleshooting” on page 291 for details. Flashing red then green in a 3 second cycle Power up test sequence. Table 9.
Chapter 9: Peripheral Devices & Accessories Battery Charge Duration 9.6.2 Battery Charge Duration A fully discharged battery can take up to 4 hours to charge. The quad battery charger stops applying power to the battery when it is fully charged–there is no risk of overcharge if the battery remains in the charge well. The 75% charge indicator is handy if you need a quick recharge–a quick charge often takes less than one hour. 9.6.
Chapter 9: Peripheral Devices & Accessories Indicator Does Not Light When Battery Installed • Reconnect the mains cable in the charger and mains outlet. If the power LED still does not light up: • Unplug the mains cable, and check the fuse at the rear of the charger. If the fuse appears to be intact, the charger requires service. 9.6.4.4 • • • • • Indicator Does Not Light When Battery Installed Remove the battery, and clean the contacts on the battery and the charge well.
Chapter 9: Peripheral Devices & Accessories Quad Docking Station Setup The quad docking station permits each of four docked WORKABOUT PROs to communicate with a 10/100 BaseT Ethernet network at greater than 2Mbps. It also provides sufficient power to operate and fast charge the batteries in the units. 9.7.1 Quad Docking Station Setup After unpacking the unit: • • Visually inspect the unit for any damage. Install the IEC power cord and apply power.
Chapter 9: Peripheral Devices & Accessories Network Access 9.7.4 Network Access The quad docking station has one 10/100 Ethernet port. You can insert up to four hand-held units. The hand-helds are connected to an internal USB hub. The handheld unit automatically detects insertion into a quad docking station and loads the appropriate drivers to communicate with the USB/Ethernet converters. 9.7.4.
Chapter 9: Peripheral Devices & Accessories AC Wall Adaptor And Tether Cable • • • • • • Try inserting the WORKABOUT PRO in another well in the quad dock. Check for dirt or contamination on the docking contacts at the bottom of the WORKABOUT PRO. Wipe the contacts with a damp cloth if necessary. Check the pogo pins inside the dock cradle for dirt. Gently wipe with a damp cloth if they appear to be dirty or discoloured. Check that the pogo pins are not bent or damaged.
Chapter 9: Peripheral Devices & Accessories AC Wall Adaptor And Tether Cable Audio Jack Low Insertion Force Port (LIF) Tether Port Figure 9.17 Bottom Of WORKABOUT PRO Connecting a wall adaptor (WA3220) and tether cable (CA1050) to your WORKABOUT PRO will supply AC power to your unit. The tether cable is equipped with a tether port so that you can attach a peripheral device to the hand-held while providing power. A power lead must be ordered separately.
Chapter 9: Peripheral Devices & Accessories Cigarette Lighter Adaptor 9.9 Cigarette Lighter Adaptor Fuse Cigarette Lighter Adaptor Tether Connector Tether Cable DC Power Plug Tether Port DC IN Socket Figure 9.18 Cigarette Lighter Adaptor The cigarette lighter adaptor is an optional accessory that allows you to power your WORKABOUT PRO through your vehicle cigarette lighter. • Attach a tether cable (see Figure 9.16 on page 295) to the base of the WORKABOUT PRO.
Chapter 9: Peripheral Devices & Accessories The Vehicle Cradle 9.10 The Vehicle Cradle Figure 9.19 Unpowered Vehicle Cradle The vehicle cradle is available in two versions–unpowered (WA1000) and powered (WA1010). A port replicator option is available for both types of vehicle cradle. The vehicle cradle is a highly ruggedized, single station dock. Although it provides quick insertion and removal, the cradle holds the WORKABOUT PRO securely even when operated in high vibration environments. 9.10.
Chapter 9: Peripheral Devices & Accessories Mounting Template Pedestal mounts are recommended for all fixed mount locations because they offer optimal operator access. In addition, for safety reasons, only pedestal mounts with fully locking joints should be used in vehicles. Always adjust the pedestal for the optimum viewing angle, and securely tighten the hex and wing screws. The most effective way to mount the vehicle cradle is to use the four #8-32 threaded inserts on the rear of the unit.
Chapter 9: Peripheral Devices & Accessories Maintaining The Vehicle Cradle • To remove the unit, press firmly on the RELEASE button on the front face of the unit until it releases from it latch. The hand-held will be slightly raised so that it can be removed. 9.10.4 Maintaining The Vehicle Cradle Two latches in the cradle hold the WORKABOUT PRO firmly in place.
Chapter 9: Peripheral Devices & Accessories Powered Vehicle Cradle Installation 9.10.6 Powered Vehicle Cradle Installation The powered cradle option is designed to allow the WORKABOUT PRO to be powered by a vehicle battery. The battery installed in the hand-held is also recharged by the vehicle battery. This option accepts DC power sources ranging from 10 to 55V, with optional pre-regulator. The vehicle cradle can be ordered with the powered cradle option installed.
Chapter 9: Peripheral Devices & Accessories The Port Replicator 9.10.7 The Port Replicator Figure 9.20 Port Replicator The port replicator (Model# WA4005) is an optional accessory that allows tethered devices as well as mounted peripherals (e.g., bar code printers or weigh scales) to be attached to the vehicle cradle. The replicator can be used with or without the cradle power option. The functionality of the WORKABOUT PRO tether port is replicated into RS-232 serial interfaces by the port replicator.
Chapter 9: Peripheral Devices & Accessories Bluetooth Peripherals system throughput. To minimize the impact on the backbone 802.11b network, Psion Teklogix recommends using Bluetooth peripherals that have low transaction rates (such as printers and scanners). Refer to “Bluetooth Setup” on page 172 for information about setting up your Bluetooth devices for communication. In addition, review the manual shipped with your Bluetooth device to determine the method used to associate with the WORKABOUT PRO host.
10 SPECIFICATIONS 10.1 Hand-Held Computer Specifications . . . . . . . . 10.2 Radio Specifications . . . . . . . . . . . . . . . . 10.3 Scanner Specifications . . . . . . . . . . . . . . . 10.3.1 SE 1223HP Scanner Specifications . . . . . 10.3.2 SE 923HP Scanner Specifications . . . . . . 10.3.3 E1022 Linear 1D Imager Scanner . . . . . . 10.3.4 Symagery SX5390 Advanced Imager . . . . 10.4 Battery Specifications . . . . . . . . . . . . . . . . 10.4.1 Standard Battery Pack . . . . . . . . . . . . 10.4.
Chapter 10: Specifications Hand-Held Computer Specifications Note: Performance specifications are nominal and subject to change without notice. 10.1 Hand-Held Computer Specifications WORKABOUT PRO C Models Size • • • Length: 8.7" (221mm) Width: 3" (76mm) at grip area tapering to 3.6" (92mm) at display area. Depth: 1.2" (31mm) at grip area tapering to 1.7" (44mm) at display area. Weight With battery: 16 oz. (454g); add 2.6 oz. (75g) with SE 1223HP scanner expansion module; add 0.7 oz. (19g) with 802.
Chapter 10: Specifications Hand-Held Computer Specifications Power Management • • • • • • • 3.8V Standard Capacity Li-ion rechargeable battery - up to 8 hours of operation. 3.8V High-Capacity Li-ion rechargeable battery - up to 12 hours of operation. Advanced Smart Battery w/ gas gauge. Quick swap battery packs. Built-in fast charger. Rechargeable, user-replacable internal coin battery. Also accepts 3 AA Alkaline batteries.
Chapter 10: Specifications Radio Specifications 10.2 Radio Specifications 802.11b Direct Sequence Spread Spectrum Transmit Power 50mW max for EU countries Frequency Range 2.400-2.484GHz for EU Channels Data Rates 100mW max for USA 2.400-2.474 for USA, Canada 1 to 11 for USA, Canada 1-13 for EU countries 1-13 or 14 for Japan 1,2,5.5 and 11Mbps 10.3 Scanner Specifications 10.3.1 SE 1223HP Scanner Specifications Physical Characteristics Dimensions: Weight: SE 1223HP (Decoded) 0.76 in. max. H x 1.51 in.
Chapter 10: Specifications SE 923HP Scanner Specifications 12 position ZIF connector. Symbol Standard SSI Interface with logic level serial data communications plus trigger, beeper and decode LED signals Interfaces: User Environment Ambient Light, Artificial: Ambient Light, Sunlight: Operating Temperature: Storage Temperature: Humidity: Power, Input Voltage: Power, Input Current: Power, Standby Current: Shock: 450 ft. candles (4,844 lux) 10,000 ft.
Chapter 10: Specifications E1022 Linear 1D Imager Scanner Parameter Humidity: Power: Input Voltage: Input Current: Standby Current: Shock Output Power (peak) SE 923 5% to 95% noncondensing 3.0-5.5 VDC ± 10% 65 mA typical 8 µA max 2000 G 0.94mW Figure 10.2 SE 923 Scanner 10.3.3 E1022 Linear 1D Imager Scanner Parameter Optics Sensor Scan Rate Scan Angle Skew and Pitch Min.
Chapter 10: Specifications Symagery SX5390 Advanced Imager Parameter Storage Temperature Humidity Power Shock E1022 -25 to 70°C (-11 to 160°F) 5% to 95% (non-condensing) Voltage: +5VDC +-5% Current: 140 mA typical Standby current: 40µA Withstands multiple 1m (3') drops on concrete Figure 10.3 E1022 Decoded 1D Imager Scanner 10.3.
Chapter 10: Specifications Battery Specifications Parameter Storage Temperature Shock Weight Connectivity SX5390 -30 to 60° C (-22° to 140° F) 15 drops, 5 ft to concrete at room temperature when integrated correctly into end-user packaging 12 grams USB 1.1 or serial async Figure 10.4 SX5390 Imager 10.4 Battery Specifications 10.4.1 Standard Battery Pack Chemistry Capacity Voltage Cell Configuration Cell Type Max. Discharge Current Charge Algorithm Max. Charge Voltage Max.
Chapter 10: Specifications High-Capacity Battery Pack -20° C to 60° C (-4° F to 140° F) Storing battery at elevated temperatures is not recommended. 300 cycles minimum with no degradation below 80% of Cycle Life nominal capacity based on standard charge / standard discharge rates (to 2.8V) @ 25ºC Impedance 45m¾ max. @ 1kHz AC only the battery cell 200 m ¾max.
Chapter 10: Specifications High-Capacity Battery Pack Max. Fast Charge Time 5.0 hrs Recommended Termination Taper Current 50 - 100 mA Recommended Charge Termination Timeout 30 min. Charge Temperature 0° C to 45 °C (32° F to 113° F) Discharge Temperature -20° C to 60° C (-4° F to 140° F) Recommended Termination Taper Current 50 - 100 mA Recommended Charge Termination Timeout 30 min.
Chapter 10: Specifications Maxell ML2032 Rechargeable Coin Battery 10.4.3 Maxell ML2032 Rechargeable Coin Battery Model ML2032 System Lithium Ion Nominal Voltage (V) 3V Nominal Capacity (mAh*) 65 Nominal Discharge Current (µA) 200 Depth of Discharge = 10% 1,000 (6.
APPENDIX A SUPPORT SERVICES AND WORLDWIDE OFFICES Psion Teklogix provides a complete range of product support services to its customers worldwide. These services include technical support and product repairs. A.1 Technical Support Technical Support for Mobile Computing Products is provided via e-mail through the Psion Teklogix customer and partner extranets. To reach the website, go to www.psionteklogix.com and click on the appropriate Teknet link on the home page.
A.3 Worldwide Offices COMPANY HEADQUARTERS AND CANADIAN SERVICE CENTRE NORTH AMERICAN HEADQUARTERS AND U.S. SERVICE CENTRE Psion Teklogix Inc.Psion Teklogix Corp. 2100 Meadowvale Boulevard Mississauga Ontario Canada L5N 7J9 1810 Airport Exchange Boulevard Suite 500 Erlanger, Kentucky USA 41018 Tel: Fax: Tel: Fax: +1 905 813 9900 +1 905 812 6300 E-mail: salescdn@psion.com +1 859 371 6006 +1 859 371 6422 E-mail: salesusa@psion.com INTERNATIONAL SUBSIDIARIES (see also www.psionteklogix.
APPENDIX B PORT PINOUTS B.1 Standard Battery Contact Pin Definition PIN # Signal Name Description 1 P+ Power Pin for Battery Pack Positive 2 P+ Power Pin for Battery Pack Positive 3 DQ One-wire Interface Data Pin 4 T GND 5 P- Power Pin for Battery Pack Negative 6 P- Power Pin for Battery Pack Negative 7 PS Power Switch Sense Pin B.
Appendix B: Port Pinouts LIF (Low Insertion Force) Port Pinout B.
Appendix B: Port Pinouts Audio Mini-Plug PIN # Signal Name 9 DC Power In, for supplying power to WORKABOUT PRO / charging battery (5V, 3A) 10 DC Power In, for supplying power to WORKABOUT PRO / charging battery (5V, 3A) 11 Not used. 12 Not used. 13 Not used. 14 Not used. 15 Not used. 16 Ground 17 Ground 18 Ground B.
INDEX A About Device icon 99 About icon (software version) 99 accessories belt loop (carrying case) 277 carrying case 276 cigarette lighter adaptor 297 desktop docking station 284 Ethernet adaptor cable 288 hand strap 273 holster, soft shell 279 pistol grip 275 port replicator 302 quad battery charger 290 quad docking station 292 single battery charger 289 swivel belt loop (carrying case) 277 tether cable & wall adaptor 295 vehicle cradle 298 wall adaptor & tether cable 295 ActiveSync 17, 287 options 182 s
Index Code 128 118, 134 Code 39 133 Code 93 123, 131, 134 Discrete 2 of 5 126, 130 EAN 13 119, 130 EAN 8 119, 129 Interleaved 2 of 5 124, 130, 135 MSI Plessey 125, 131 UPC A 120, 129 UPC E 120, 129 Translation tab 140 batteries a description of 280 charging 15, 25 installing 23, 24 installing in WORKABOUT 16 internal (ML2032) 15 removing 23 run time, maximizing 39 safety precautions 280 swap time 25 1800 mAh pinout B-1 2700 mAh pinouts B-1 battery charger safety instructions 282–283 Battery Details tab 107
Index CLSI Editing 123 Codabar 122, 131, 134 Codabar 122 Code 11 131 Code 128 134 Code 128 118, 129 Code 128 Emulation 126 Code 32, Convert To 115 Code 32 Prefix 115 Code 39 115, 129 Code 93 123, 131, 134 Code 93 123 cold reset 18 columns deleting 230 inserting 229 working with 226 communication ActiveSync 17, 287 Ethernet connection (desktop dock) 288 Ethernet connection (quad dock) 293 WORKABOUT to PC 17, 287 companion CD 16 Composite 128, 138 connecting to a server with 245 connection, cancelling (modem)
Index EAN 8 119, 129 EAN-8 Zero Extend 119 ECI Decoder 115 email notification 49 Enable Bookland (UPC-EAN) 121 Enable CC-AB 128 Enable CC-C 128 Enable RSS Expanded 127 Enable RSS Limited 127 Enable RSS-14 127 Enable TLC-39 128 ESC Key 30, 33 Ethernet card See Network Card 164 Excel See Pocket Excel 222 expansion modules 261 GSM/GPRS module, installing 265 PCMCIA module, installing 263 scanner module, installing 268, 269 External Power tab 100 E1022 1D imager specs 311 F Fast Converge (Imager) 133 features
Index storage space, freeing 192, 193 View menu options 191 web sites, organizing 194 ISBT 128 118 removing 24 Low Power Timeout 112 L1, Set Length 116 L2, Set Length 116 K M keyboard one shot mode 82 options 90 Scancode remapping 87 Unicode Mapping 85 keyboard, soft (onscreen) 64 keyboard backlight 30, 36 keyboard keys 27 ALPHA 33 ALT 30, 33 arrow keys 29, 33 BKSP 29, 33 CTRL 30, 33 DEL 29, 33 ESC 30, 33 Function keys 30, 34 Macro keys 30 macro keys 84 modifiers 28, 32 one shot mode 82 PgDn 33 PgUp 33
Index advanced settings 161 Baud Rate 161 Cancel If Not Connected 162 Dial-String Commands 162 Server Settings 164 TCP_IP Settings 163 Wait For Credit Card 162 Wait For Dial Tone 161 modifier keys 28, 32 locking 28, 32 One Shot Mode 82 unlocking 28, 32 MSI Plessey 125, 131 MSN Messenger 208 account, setting up 208 contacts, adding 210 getting started 208 privacy, managing 211 signing in 209 signing out 210 music, playing 255 N name, assigning to WORKABOUT PRO 99 navigation bar 46 Clock button 47 Connectiv
Index document, opening 237 document, reverting to saved 238 document, saving 238 finding text 243 paragraphs, adjusting 242 replacing text 244 templates, using 236 text, formatting 241 toolbar, using 241 undoing actions 243 port pinouts B-1 port replicator 302 ports Data Bits 162 Flow Control (modem setup) 163 LIF (Low Insertion Force) B-2 Parity (modem setup) 163 Stop Bits (modem setup) 163 Terminal (modem setup) 163 tether B-2 Postal PlaNET 135 PostNET 136 Royal 136 Power 105 Advanced battery settings 10
Index bar code settings (internal) 110 Bi-Direction Redundancy 113 Center Bar Code Only (Imager) 132 Check Digits (MSI Plessey) 125 Check Digit Verification 116, 124 Click Data (appending data) 139 Click Time (double-click) 138 CLSI Editing 123 Codarbar 122 Code 128 118, 129 Code 128 Emulation 126 Code 32 Prefix 115 Code 39 115, 129 Code 93 123 Composite 128, 138 Conv. UPC-E To UPC-A 121 Conv.
Index scanning aiming (target) dot duration 112, 132 appending characters 119, 139 Auto Exposure (Imager) 133 Aztec 137 Bad Scan Beep 139 bar code settings 110 Bi-Direction Redundancy 113 Center Bar Code Only (Imager) 132 check digit 125 Check Digits (MSI Plessey) 125 Check Digit Verification 116 Check Digit Verification (I 2 of 5) 124 Click Data (appending data) 139 Click Time 138 CLSI Editing 123 Codabar 122 Code 128 118, 129 Code 128 Emulation 126 Code 32 Prefix 115 Code 39 115, 129 Code 93 123 Composite
Index 2D Raster Expand Rate 114 2D Raster Height 114 2D RSS Code 127, 137 2D Scanning Mode 113 2D UPC Half Block Stitching 122 Scan Result 139 Scan Result Time 139 screen stylus, using to navigate 45 touch pen, using 45 Windows CE, navigating 45 scrolling, adjusting speed (Up_Down tab) 82 Security Level 122 security options, changing (Internet Explorer) 192 Server Settings (modem setup) 164 service information 4 Set Length L1 116 Set Length L2 116 Settings 62, 81 Buttons 81 Personal Tab 81 Buttons icon 81 O
Index transcribing, editing within 65 title bar (navigation bar) 46 Today’s Screen (desktop screen) 45 appearance of 97 Items (to appear in screen) 98 Today’s Screen (desktop screen), navigation bar 46 toolbar (Word), using 241 Total Recall 154 backup profile, creating 155 backup profile, restoring 157 touch pen, using 45 touchscreen recalibration 36 stylus, using 45 touch pen, using 45 touchscreen, aligning (calibrating) 36 Transcriber Inking 92 quick settings 92 Transcriber (Input Methods tab) 91 Transcri
Index 2D RSS Code 127, 137 2D Scanning Mode 113 2D UPC Half Block Stitching 122 xii Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
