User Guide

Table Of Contents
Chapter 3: Getting To Know The WORKABOUT PRO
Battery Safety
24
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
3.3.1 Battery Safety
Important: Before attempting to install, use or charge the battery pack, it is
critical
that you review and follow the important safety guidelines
in the section entitled “Lithium Ion Battery Safety Precautions”
beginning on page 280.
3.3.2 Removing And Installing The Battery Pack
Removing The Battery Cover
Turn the fasteners at the base of the battery cover counter-clockwise to
unlock the cover. The top of the stylus has a screwdriver shaped end to help
you loosen the fasteners.
Lift and remove the cover.
Figure 3.4 The Battery Cover
Installing The Battery
•Insert a charged battery in the unit.
Replace the battery cover, and turn the fasteners at the base of the battery
cover clockwise to lock the battery in place.
Note: If you are using a docking station or other external power source,
you can insert an uncharged battery, dock the unit and switch it on.
Otherwise, always begin the day with a charged battery.
Battery Cover Fasteners