User manual
Psion Teklogix WAPro Multi-Dock User Manual4
3.0 Multi-Dock Operation
The WA4204-G2/WA4304-G2 Multi-Dock (Figure 3.1) is a
desktop model designed to accept the handheld computer for
Ethernet data transfer and supply power to the handheld com-
puter internal battery charger.
The Multi-Dock is equipped with a 10/100BaseT Ethernet in-
terface and connects from one to four handheld computers to an
Ethernet network. The Multi-Dock Ethernet port is compatible
with 10BaseT and 100BaseT Ethernet networks. Adapters (not
supplied) are available, if required, to convert this port to older
style Ethernet interfaces.
The rear-mounted RJ45 connector incorporates LEDs that
indicate data trafc (see Figure 3.2) when the handheld is in
the cradle, powered on and the dock is connected to mains. The
green Link LED ashes to indicate the presence of data trafc.
The yellow Speed LED is steady “on” when the network is
100Mbps and “off” when the network is 10Mbps.
3.1 Operator Controls
The Multi-Dock has no operator controls or power switch.