User`s manual

120
Section 6
Specifications and Dimensions
RFID System
User's Manual
Section 6
Appendices
Specifications and Dimensions
General Specifications
Note: This does not include the connector section. The main unit is not resistant to chemicals or oils.
Performance Specifications
V600-A22 Specifications
Item
Specification
V680-CHUD
V680-CH1D V680-CH1D-PSI
0.8 m 1.9 m
Supply voltage 5.0 VDC ±5% (at Reader Writer connector)
Ambient operating
temperature
0 to 40°C
Ambient operating humidity 35% to 85% (with no condensation)
Ambient storage
temperature
−25 to 65°C
Ambient storage humidity 35% to 85% (with no condensation)
Degree of protection IEC60529, IP63 (See note.)
Weight Approx. 110 g
(with cables and con-
nectors)
Approx. 140 g
(with cables and con-
nectors)
Approx. 170 g
(with cables and con-
nectors)
Approx. 120 g
(with cables and con-
nectors)
Current consumption 500 mA max. (supply voltage: 5.0 V)
Material Case: ABS resin; Nameplate: PET resin
Vibration resistance 10 to 150 Hz, 0.2-mm double amplitude at 15 m/s
2
acceleration in 6 directions 10 times for 8 min-
utes each
Shock resistance 150 m/s
2
(approx. 15G), 3 times each in 6 directions (up, down, right, left, forward, reverse)
Insulation resistance 50 MΩ min. (at 500 VDC) between connector terminals and case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between connector terminals and case (leakage current: 1 mA
max.)
Cable length 0.8 m 1.9 m 2.5 m 0.8 m
Item Specification
Diagnostic function Checks for CPU errors, memory errors, and communications errors
Item Specification
Input voltage 100 to 120 VAC at 50/60 Hz
Input current 200 mA±20% (100 VAC)
170 mA±20% (120 VAC)
Output voltage 5 VDC±0.25 V
Ambient operating temperature 0 to 40°C
Ambient storage temperature −40 to 70°C
Ambient storage humidity 25% to 85%
Insulation resistance 100 MΩ min. (at 500 VDC) between input terminals and output terminals
Dielectric strength 1,500 VAC for 1 min between input terminals and output terminals (leakage current: 5 mA max.)
Weight Approx. 85 g
Applicable standards UL and CSA