User`s manual

15
RFID System
User's Manual
Section 1
Names and Functions of Components
Section 1
Product Overview
V680-CH1D-PSI
■ Operation Indicator (LED)
After the operation indicator is lit or flashing for a certain time, it will turn OFF.
■ Activate Switch
When button commands or commands with button communications specifi-
cations (button trigger or button auto) are used and the activate switch is
pressed, communications with the ID Tag will start. (For details on button
communications specifications, refer to Section 3 Commands.)
If the activate switch is pressed with the Hand-held Reader Writer in the ini-
tialization stand-by mode (with the green indicator flashing), the function
settings will be initialized.
■ Reset Button
Press this button for two seconds or more when the power is first turned ON
to put the Hand-held Reader Writer into the initialization stand-by mode.
■ Serial Interface Connector
This is a serial interface with an RS-232C-compliant D-Sub 9-pin connector.
■ Antenna
To communicate with the ID Tag, move the antenna closer to it.
Display Meaning
Lit green
A command has been received from the host device.
Communications with the ID Tag have completed normally.
Flashing green
• When the power is turned ON, after initialization of the Hand-held
Reader Writer is completed.
• When the power is turned ON and the reset button is pressed for
two seconds or more (initialization stand-by mode).
Communications with the ID Tag are in progress.
Lit red
A communications error with the ID Tag has occurred.
A CPU error has occurred.
Flashing red
An ID Tag non-existent error has occurred.
A communications error with the host device has occurred.
Antenna
Operation indicator (LED)
Activate switch
Serial interface
connector
Reset button