User`s manual

Section 2

V680-CHUD Communications Preparations

RFID System

User's Manual

Section 2

Communications Preparations

V680-CHUD Communications Preparations

Connections

■ Connecting the Cable

1. Connect the cable connector to the USB connector on the host

device, making sure that the connector is oriented correctly

and not inserted at an angle.

■ Removing the Cable

1. Remove the cable.

Close the software application at the host device and then pull out the connec-

tor in a straight line, not at an angle.

If the connector is removed while the software is running at the host

device, operation may stop due to a software malfunction error.

Restart the software if operation becomes impossible.