User`s manual

42
Section 2
Communications Test
RFID System
User's Manual
Section 2
Communications Preparations
Communications Test between Host Device and Hand-held
Reader Writer
Use the test command to test communications between the Hand-held Reader Writer and host device.
Before performing communications with the ID Tag, check the Hand-held Reader Writer connections
and communications.
1. Send the test command from the host device.
For detail on the test command, refer to TEST (TS).
p.67, p.97
2. If communications is normal, the Hand-held Reader Writer will return the received data.
If a response is not returned, refer to Troubleshooting.
p.115
Communications Test between ID Tags and Hand-held Reader
Writer
Use actual commands to test communications between the ID Tags and the Hand-held Reader Writer.
1. Send the READ command (RD) with an SA communications specification from the host device.
For details on the READ command, refer to READ (RD).
If using V600 commands, refer to the Auto Read command (AR).
p.53
, p.79
The Hand-held Reader Writer will communicate with the ID Tag and the operation indicator will flash green.
2. Move the antenna of the Hand-held Reader Writer close to the ID Tag.
The Hand-held Reader Writer will read the data in the ID Tag when the Hand-held Reader Writer moves within the communica-
tions range. As a result, the operation indicator will light green and then turn OFF.