User`s manual

64
Section 3
V680 Commands
RFID System
User's Manual
Section 3
Commands
■ BASIC FUNCTIONS SETTING (FN)
This command is used to set the Auto Commands OFF function. The Hand-held Reader Writer must
be restarted to make the changes take effect.
A memory error will occur if the power supply is interrupted while parameters are being changed.
Auto Command OFF
specifications
Designates whether the Auto Command OFF function is used.
0: Auto Command OFF used.
1: Auto Command OFF not used.
Default setting: Auto Command OFF used.
Fixed value Always 0.
End code Indicates the execution result for the command.
00: Normal completion
For details on end codes, refer to End Codes.
p.69
Fixed value Always 1.
Resend flag Always 0.
Command
FN
0
Fixed
value
211
2
CR
×
Command
code
Terminator
Auto
Command
OFF
specification
Response
FN
00
2
2
2
CR
01
11
Command
code
Terminator
End code
Fixed
value
Resend
flag