User`s manual

69
RFID System
User's Manual
Section 3
V680 Commands
Section 3
Commands
End Codes
End codes are given in 2-digit hexadecimal.
Note: Vertical parity errors, framing errors, and overrun errors do not occur for the V680-CHUD.
For details on each error, refer to Error Tables.
p.116
Status End code Meaning
Normal 00 Normal completion
Host communications error 10 (See note.) Vertical parity error
11 (See note.) Framing error
12 (See note.) Overrun error
14 Format error
15 Execution status error
18 Frame length error
Lower communications error 70 ID Tag communications error
71 Mismatch error
72 ID Tag non-existent error
76 Error end code for the DATA CHECK command or OVERWRITE COUNT CON-
TROL command (verification error or overwrite count exceeded) or error for
READ WITH ERROR CORRECTION or DATA CHECK command
77 Warning for READ WITH ERROR CORRECTION or DATA CHECK command
79 ID Tag error
7A Address error
7C Antenna error
7D Write protection error
Memory error 93 Internal memory error