User`s manual

75
RFID System
User's Manual
Section 3
V600 Commands
Section 3
Commands
Command List
Commands can be classified into four major types.
■ Communications Commands
The following commands are used for communications with the ID Tag.
■ Communications Subcommands
These commands are used to cancel command execution.
■ Controller Control Commands
These commands are used to reset the Controller or set serial communications.
■ Host Commands
These commands are used to test communications between the Hand-held Reader Writer and host
device.
Command code Command name Function Page
RD READ Reads memory data from the ID Tag. p.76
WT WRITE Writes data to the memory of the ID Tag. p.78
AR AUTO READ Reads data from the ID Tag when the ID Tag enters the communica-
tions area.
p.79
AW AUTO WRITE Writes data to the memory of the ID Tag when the ID Tag enters the
communications area.
p.81
BR BUTTON READ Reads data from the memory of the ID Tag when the activate switch is
pressed.
p.83
BW BUTTON WRITE Writes data to the memory of the ID Tag when the activate switch is
pressed.
p.85
UR BUTTON AUTO READ Reads data from the ID Tag when the ID Tag enters the communica-
tions area after the activate switch is pressed.
p.86
UW BUTTON AUTO WRITE Writes data to the memory of the ID Tag when the ID Tag enters the
communications area after the activate switch is pressed.
p.88
CW CALCULATION WRITE Writes the calculation results for the memory data to the ID Tag. p.89
FL DATA FILL Writes data for the specified number of write bytes beginning from the
write start address specified in the command.
p.90
AF AUTO DATA FILL Writes the specified data to the specified number of bytes beginning
from the specified start address when the ID Tag approaches.
p.91
MDC/K DATA CHECK Calculates or compares memory check codes in the ID Tag. p.93
MDS OVERWRITE COUNT
CONTROL
Controls the number of overwrites for ID Tags.
p.94
ID ID CODE READ Reads the UID in the ID Tag. p.95
Command code Command name Function Page
AA COMMAND PROCESS-
ING TERMINATE
Forcedly ends communications with the ID Tag.
p.96
XZ ABORT Resets the Hand-held Reader Writer. p.98
Command code Command name Function Page
TR COMMUNICATIONS CON-
DITIONS SETTING
Sets communications parameters for communications with the host
device.
p.99
FN BASIC FUNCTIONS SET-
TING
Sets the Specify Auto Command OFF function.
p.100
UL SET INFORMATION READ Reads the settings data for the Hand-held Reader Writer. p.101
SP PARAMETER SET Sets, reads, or initializes Hand-held Reader Writer parameters. p.102
Command code Command name Function Page
TS TEST
Confirms the communications status between the Hand-held Reader Writer
and host device. The data sent from the host device is returned as is.
p.97