User`s manual

RFID System

User's Manual

Section 3

V600 Commands

Section 3

Commands

■ ID CODE READ (ID)

Reads the ID code in the ID Tag.

The ID READ command writes the ID code to the ID Tag's memory, and will thus be affected by the ambient tempera-

ture. Be careful when using the ID Tag in environments with high ambient temperatures.

Data setting Always H.

End code Indicates the execution result for the command.

The end code 00 indicates normal completion.

For details on end codes, refer to End code List.

p.104

UID The UID is an ID that uniquely identifies an ID Tag. (Unique Identifier)

Note: An ID code will not be attached if an error occurs.

Command

code

Data

setting

Terminator

Response

×××…×

0 or 16

UID

TerminatorEnd code

Command

code