Developers guide

Chapter 14: Scanners
Configuring Global Bar Code Options
Psion Teklogix Mobile Devices SDK Developers Guide 93
14.3.2.3 Decoded Scanner Advanced Options
These settings apply to internal decoded scanners (including imagers acting as bar code scanners)
only.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.2.4 Decoded Scanner 2D Options
These settings apply to the internal decoded scanner only.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
•Tab
Barcodes
• Scanner:
Decoded (internal)
• Menu Item
Advanced Options
Scanner Setting Key: Decoded
Scanner Setting Name Minimum Maximum Default Control Panel Name
Continuous Scan 0 = off 1 = on 0 Continuous Scan Mode
Minimum Cancel Time 0 500 0 Minimum Cancel Time
Power Mode 0 1 1 Power Mode
Time Delay To Low Power 0 3 0 Low Power Timeout
Parameter Scanning 0 = off 1 = on 1 Parameter Scanning
Linear Code Type Security
Levels
1 4 2 Linear Security Level
Bi-directional Redundancy 0 = off 1 = on 0 Bi-directional
Redundancy
Scan Angle 181 182 182 Scan Angle
Scanning Mode 1 7 1 Scanning Mode
Raster Height 1 15 15 Raster Height
Raster Expansion Rate 1 15 11 Raster Expand Rate
•Tab
Barcodes
• Scanner:
Decoded (internal)
• Menu Item
2D Scanning Options