Developers guide

Chapter 14: Scanners
Configuring Global Bar Code Options
94 Psion Teklogix Mobile Devices SDK Developers Guide
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.2.5 Decoded Scanner Data Options
These settings apply to the internal decoded scanner only.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.2.6 Imager Options (Deprecated)
These settings apply to the internal imaging scanner only. An imaging scanner captures a bar code
as an image, then decodes the bar code from that image. The settings listed here only apply to the
imager in bar code scanning mode. There is a separate set of configuration parameters for the
image capture mode—these can only be set through the SDK.
Scanner Setting Key: Decoded
Scanner Setting Name Minimum Maximum Default Control Panel Name
Scanning Mode 1 7 1 Scanning Mode
Raster Height 1 15 15 Raster Height
Raster Expansion Rate 1 15 11 Raster Expand Rate
•Tab
Barcodes
•Scanner:
Decoded (internal)
• Menu Item
Data Options
Scanner Setting Key: Decoded
Scanner Setting Name Minimum Maximum Default Control Panel Name
Tran s m i t C o d e ID
Character
0 2 0 Transmit Code ID Char
Scan Data Transmission
Format
0 7 0 Scan Data Format
Prefix 0 0xFF 0 Prefix <P>
Suffix 1 0 0xFF 13 Suffix <S1>
Suffix 2 0 0xFF 10 Suffix <S2>
Delete Character Set ECIs 0 = off 1 = on 0 Delete Char Set ECIs
ECI Decoder 0 = off 1 = on 0 ECI Decoder
Important: New applications must use the Mobile Devices SDK for laser bar code scanners
only. The Imaging Services SDK must be used for all imaging scanner applica-
tions including reading bar codes.