Developers guide

Psion Teklogix Mobile Devices SDK Developers Guide 97
Chapter 14: Scanners
Configuring Bar Code Symbologies
Code 39 Settings
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.2 Code 39 Settings
Non-decoded Scanner
These settings apply to an internal non-decoded, and an external non-decoded, scanner using the
Code 39 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Scanner Setting Key: Barcode\[Symbology Code]
1
\Scs
Scanner Setting Name Minimum Maximum Default Control Panel Name
Field Size 0 1400 0 Field Size
Minimum Size 0 1400 0 Minimum Size
Maximum Size 0 1400 0 Maximum Size
Prefix Char 0 0xFFFF 0 Prefix Char
Suffix Char 0 0xFFFF 0 Suffix Char
Strip Leading 0 127 0 Strip Leading
Strip Trailing 0 127 0 Strip Trailing
1
Replace “[Symbology Code]” with the code found in the appropriate symbology section
below (e.g. “C39”, “I25”, “Codabar”, etc.)
•Tab
Barcodes
• Scanner:
Non-decoded
• Menu Item
Code 39
Scanner Setting Key: Barcode\C39
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Full Ascii 0 = off 1 = on 0 Full ASCII
Include Chk 0 = off 1 = on 0 Include Check
AIAG Strip 0 = off 1 = on 0 AIAG Strip
Err Accept 0 = off 1 = on 0 Error Accept
Mod Chk Base 0 2 0 Mod Checks
Transmit Code ID Transmit Code ID Char