Developers guide

98 Psion Teklogix Mobile Devices SDK Developers Guide
Chapter 14: Scanners
Configuring Bar Code Symbologies
Code 39 Settings
Decoded Scanner
These settings apply to an internal decoded scanner using the Code 39 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Imager (Deprecated)
These settings apply to an internal imager scanner using the Code 39 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
•Tab
Barcodes
• Scanner:
Decoded (internal)
• Menu Item
Code 39
Scanner Setting Key: Barcode\C39\Decoded
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Trioptic 0 = off 1 = on 0 Enable Trioptic Code 39
Convert to Code 32 0 = off 1 = on 0 Convert to Code 32
Code 32 Prefix 0 = off 1 = on 1 Code 32 Prefix
Length L1 0 55 1 Set Length L1
Length L2 0 55 55 Set Length L2
Check Digit Verification 0 = off 1 = on 0 Check Digit Verification
Transmit Check Digit 0 = off 1 = on 0 Transmit Check Digit
Full Ascii Conversion 0 = off 1 = on 0 Full ASCII
Decode Performance 0 = off 1 = on 1 Decode Performance
Decode Performance Level 1 3 1 Decode Perf. Level
•Tab
Barcodes
• Scanner:
Imager
• Menu Item
Code 39