Developers guide

102 Psion Teklogix Mobile Devices SDK Developers Guide
Chapter 14: Scanners
Configuring Bar Code Symbologies
Code 128 Settings
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Intermec ISCP Imager
These settings apply only to the Intermec ISCP imager acting as a decoded scanner using the Code
128 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
•Tab
Barcodes
• Scanner:
Imager
• Menu Item
Code 128
Scanner Setting Key: Barcode\C128\Imager
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
•Tab
Barcodes
• Scanner:
Decoded (Intermec ISCP)
• Menu Item
Code 128
Scanner Setting Key: Barcode\C128\ICSP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
EAN 128 0 = off 1 = on 1 GS1-128
EAN 128 Identifier 0 = off 1 = on 1 GS1-128 Identifier
GTIN Compliant 0 = off 1 = on 0 GTIN Compliant
FNC1 Conversion 0 255 29
FNC1 Conversion
ISBT 128 0 = off 1 = on 0 Enable ISBT128
ISBT Concatenation
Transmission
0 2 0 ISBT Concat Transmit
ISBT Concatenate Pair 0 = off 1 = on 0 ISBT Concat Any Pair
Reading Range 0 1 1 Reading Range
Check Digit Verification 0 1 0 Check Digit Verification
Length L1 0 255 0 Minimum Length