Developers guide

104 Psion Teklogix Mobile Devices SDK Developers Guide
Chapter 14: Scanners
Configuring Bar Code Symbologies
EAN 13 Settings
Decoded Scanner
These settings apply to an internal decoded scanner using the EAN 13 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Imager (Deprecated)
These settings apply to an internal imager scanner using the EAN 13 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Intermec ISCP Imager
These settings apply only to the Intermec ISCP imager acting as a decoded scanner using the EAN
13 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
•Tab
Barcodes
• Scanner:
Decoded (internal)
• Menu Item
EAN 13
Scanner Setting Key: Barcode\EAN13\Decoded
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
•Tab
Barcodes
• Scanner:
Imager
• Menu Item
EAN 13
Scanner Setting Key: Barcode\EAN13\Imager
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Addendum 0 2 0 Addendum
•Tab
Barcodes
• Scanner:
Decoded (Intermec ISCP)
• Menu Item
EAN 13