Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 105
SDK:
These settings can be changed and queried through the SDK as follows:
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the EAN 13
symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.6 EAN 8 Settings
Non-decoded Scanner
These settings apply to an internal or external non-decoded scanner using the EAN 8 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
Scanner Setting Key: Barcode\EAN13\ICSP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
ISBN Conversion 0 = off 1 = on 0 ISBN Conversion
Transmit Check Digit 0 = off 1 = on 1 Transmit Check Digit
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
EAN 13
Scanner Setting Key: Barcode\EAN13\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Check Digit 0 = off 1 = on 1 Check Digit
2 Digit Addendum 0 = off 1 = on 0 Addendum Add-on 2
5 Digit Addendum 0 = off 1 = on 0 Addendum Add-on 5
Addendum Required 0 = off 1 = on 0 Addendum Required
Addendum Separator 0 = off 1 = on 1 Addendum Separator
ISBN Translate 0 = off 1 = on 0 ISBN Translate
•Tab
Barcodes
• Scanner:
Non-decoded
• Menu Item
EAN 8