Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
106 Psion Teklogix Mobile Devices SDK Developers Guide
SDK:
These settings can be changed and queried through the SDK as follows:
Decoded Scanner
These settings apply to an internal decoded scanner using the EAN 8 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Imager (Deprecated)
These settings apply to an internal imager scanner using the EAN 8 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Scanner Setting Key: Barcode\EAN8
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Include Chk 0 = off 1 = on 1 Include Check
Addendum 0 2 0 Addendum
Tran s m i t C o d e ID
Character
0 = off 1 = on 0 Transmit Code ID Char
•Tab
Barcodes
•Scanner:
Decoded (internal)
• Menu Item
EAN 8
Scanner Setting Key: Barcode\EAN8\Decoded
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
EAN8 Zero Extend 0 = off 1 = on 0 EAN-8 Zero Extend
•Tab
Barcodes
•Scanner:
Imager
• Menu Item
EAN 8
Scanner Setting Key: Barcode\EAN8\Imager
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Addendum 0 2 0 Addendum