Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 109
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Intermec ISCP Imager
These settings apply only to the Intermec ISCP imager acting as a decoded scanner using the UPC
A symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the UPC A
symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
•Tab
Barcodes
• Scanner:
Imager
• Menu Item
UPC A
Scanner Setting Key: Barcode\UPCA\Imager
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Addendum 0 2 0 Addendum
•Tab
Barcodes
• Scanner:
Decoded (Intermec ISCP)
• Menu Item
UPC A
Scanner Setting Key: Barcode\UPCA\ICSP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Transmit Check Digit 0 = off 1 = on 1 Transmit Check Digit
Transmit Number System 0 = off 1 = on 1 Transmit Number System
Transmit as EAN-13 0 = off 1 = on 0 Convert to EAN 13
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
UPC A