Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
110 Psion Teklogix Mobile Devices SDK Developers Guide
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.8 UPC E Settings
Non-decoded Scanner
These settings apply to an internal or external non-decoded scanner using the UPC E symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Imager (Deprecated)
These settings apply to an internal imager scanner using the UPC E symbology.
Scanner Setting Key: Barcode\UPCA\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Check Digit 0 = off 1 = on 1 Check Digit
Number System 0 = off 1 = on 1 Transmit Number System
2 Digit Addendum 0 = off 1 = on 0 Addendum Add-on 2
5 Digit Addendum 0 = off 1 = on 0 Addendum Add-on 5
Addendum Required 0 = off 1 = on 0 Addendum Required
Addendum Separator 0 = off 1 = on 1 Addendum Separator
•Tab
Barcodes
•Scanner:
Non-decoded
• Menu Item
UPC E
Scanner Setting Key: Barcode\UPCE
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Exp to UPC A 0 = off 1 = on 1 Convert to UPC-A
Inc Num Sys 0 = off 1 = on 1 Include Number Sys
Include Chk 0 = off 1 = on 1 Include Check
Addendum 0 2 0 Addendum
Tran s m i t C o d e ID
Character
0 = off 1 = on 0 Transmit Code ID Char